User's Manual Part 3

337
Map/GPS Function
You can select a tone to sound for when you check your current location
or when you are requested to provide location information. You can set a
color of the Call/Charging indicator and the vibration pattern as well.
1
m1LifeKit1Map/GPS1GPS settings
1Posit. tone/illum.1Select an operation to be set
1Do the following operations.
Positioning Tone/Illumination
Select posit. ring
tone
1Select a folder1Select a ring tone.
≥While selecting a ring tone, you can check the selected tone.
Ring time setting You can set a ring time for positioning ring tone.
1Enter a ring time (seconds).
≥Enter two digits from “00” through “30”. For “Location req./
Confirm”, however, enter two digits from “00” through “20”.
If you set to 0 seconds, the tone does not sound.
Select vibrator 1Select a vibration pattern.
≥If you select “Melody linkage”, the FOMA terminal vibrates in
time with ring tone.
≥While selecting a vibration pattern, you can check the selected
vibration.
Select illumination 1Select an item.
≥While selecting an item, you can check the lighting/flickering of
the Call/Charging indicator.
If you have stored LCS clients, you can select an LCS client when you
notify of your current location. Further, you can automatically notify of
your current location when you make a call to the stored phone number.
You can store up to five LCS clients.
1
m1LifeKit1Map/GPS1GPS settings
1Reg. LCS client1Highlight <Not stored> and press
l() or Oo()
1Do the following operations.
≥If you select a stored LCS client, you can confirm the stored contents.
2
Press l().
Register LCS Client
Service client name 1Enter a service client name.
≥You can enter up to 16 full-pitch/32 half-pitch characters.
Service client ID 1Enter a service client ID.
≥You can enter up to 12 digits by using numerals, # and :.
≥Enter the service client ID specified by your service provider.
Phone number 1Enter a phone number.
≥You can enter up to 26 digits.
≥Highlight the phone number field, press i( ), and
select “Enter from PB” to call up a phone number from the
Phonebook and enter it.
≥If you enter a phone number by “Enter from PB” with “Service
client name” not entered, the name for the Phonebook entry is
entered.
Notify when dialing You can set whether to notify of your current location for when
you make a voice call or videophone call to the stored phone
number.
1ON, OFF or Confirm every dial
≥To check each time you make a call, select “Confirm every dial”.