User's Manual Part 3

405
Convenient Functions
2
Press l().
The following icons appear on the display depending on the setting:
: Repeats daily.
: Repeats on the specified day of the week.
Volume 1Use Bo to adjust the volume.
If you set “Step”, the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
Snooze You can set whether to activate Snooze. If you set to “OFF”, set
the duration that the alarm tone is to continue sounding.
1ON or OFF1Enter a ring time (minutes).
You can enter from “01” through “10” in two digits.
See page 406 for how Snooze works.
Auto power ON You can set whether to turn on the power automatically to make
an alarm sound when the alarm time arrives during power off.
1ON or OFF
Prefer manner
mode
You can set the alarm tone which sounds at the specified time
during Manner Mode.
1ON or OFF
ON . . . . . Sounds at the same volume as set for “Alarm volume”
on page 109.
OFF . . . . Sounds at the volume set for this function.
Function Menu while Alarm is Displayed
Edit Go to step 1 of “Using Alarm” on page 404.
Detail You can display the stored alarm contents.
Set this You can validate the stored alarm.
1YES
You can validate also by pressing Oo().
Set all You can validate all the stored alarm.
1YES
The icon appears on the desktop.
”. . . . . Displayed when an alarm is set for today (except the setting for past time).
”. . . . . Displayed when an alarm is set for tomorrow or onward only.
If you set “Alarm” of a schedule event/ToDo item to “OFF”, the icon is not displayed.
Release this You can invalidate the stored alarm.
1YES
You can invalidate also by pressing Oo().
Release all You can invalidate all the stored alarm.
1YES
Information
If the alarm tone sounds during a call, press any key to stop it. Once again press any
key to end the alarm including Snooze. If the other party on the phone hangs up, an
alarm including Snooze ends.
During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
If any of the following events occurs in Snooze state, Snooze is released:
When you receive a voice call, videophone call, or PushTalk call
When you receive a mail message or Message R/F while “Receiving display” is set
to “Alarm preferred”
When you receive a location provision request while “Location request set.” or the
setting by service is set to the settings that permits location provision
When an alarm of “Schedule”, “ToDo”, “TV timer” or “Timer recording” sounds
Turn off the FOMA terminal after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you set an alarm for “Alarm”, “Schedule”, and “ToDo”