User's Manual Part 3

406
Convenient Functions
The alarm sounds for about five minutes (in the case of “Alarm”, the alarm sounds for
specified time), and illumination lights. The vibrator works as you set for “Phone” of
“Vibrator”. The alarm message and an animation or i-motion movie linking to the
selected icon appear on the display.
≥If you set “Snooze” of “Alarm” to “ON”
The alarm sounds for about one minute at an interval of five minutes, up to six times,
until Snooze is released by pressing h.
≥During a call
The alarm sounds from the earpiece three times repeatedly.
≥During operations
The FOMA terminal works according to the setting of “Alarm setting”. (See page 413)
≥When you set an alarm to the time of another alarm
The alarm sounds in the priority order of “Alarm”→“Timer recording”→“ToDo”→
“Schedule”→“TV timer”. A missed schedule event or ToDo is notified by the “Missed
alarm” icon.
≥When the power is turned off
<Alarm>
When “Auto power ON” is set to “ON”, the power automatically turns on to make an
alarm notification sound. When the auto-power setting is set to “OFF”, an alarm does
not sound with the power stayed off. Even after turning the power on, the “Missed
alarm” icon is not displayed.
<Schedule/ToDo>
The alarm does not sound.
The “Missed alarm” icon is not displayed even after turning the power on.
≥In Manner Mode
The vibrator and illumination light notify you. For Schedule/ToDo, a message is also
displayed. The alarm sounds at the volume set for Manner Mode. (See page 109)
≥During Lock All, Personal Data Lock or Omakase Lock
The alarm does not sound.
After releasing each lock, the “Missed alarm” icon is displayed to inform you of the
missed alarm. Further, if the power is turned off, the power does not turn on and the
“Missed alarm” icon does not appear even after releasing each lock.
When the time specified for “Alarm”, “Schedule” or “ToDo”
comes
≥While operating the microSD card, during infrared communication, or during iC
communication
The alarm does not sound.
After each function is finished, the “Missed alarm” icon is displayed.
≥While updating a software program
The alarm does not sound.
Press any key to stop the alarm tone but the animation/i-motion movie changes to a still
image and the alarm message remains displayed. Press any key again (press h if you
set “Snooze” of “Alarm” to “ON”) to clear the display. When a call comes in, the alarm
stops sounding.
≥When multiple schedule alarm messages exist, you can switch displays by pressing
i() or l( ) after stopping the alarm tone.
“Missed alarm” icon is displayed on the desktop. You can check that icon for the contents
of the missed alarm (Missed alarm information).
The latest missed alarm information that could not be notified is displayed.
Information
≥If you set “Alarm setting” to “Alarm preferred” and the alarm time has come when you
are dialing, the alarm sounds after calling up the other party. If the alarm time has
come when receiving a call, the alarm sounds after starting communication.
≥You might not be able to set some i-motion movies or Chaku-uta Full
®
music files for
the alarm.
≥Some i-motion movies set for the alarm might be played back only with sound at the
specified time.
≥The Chaku-uta Full
®
music file set for the alarm is played back only with sound at the
specified time.
The illumination for when you play back a demo to select an alarm tone might differ
from for when you are notified by an alarm.
To clear alarm tone/alarm message, and animation/i-motion
movie from the display
When “Alarm” did not work