User's Manual Part 3

407
Convenient Functions
You can display the calendar by month to check the stored schedule
events.
You can display or store from January 1, 2000 through December 31,
2037.
≥See page 406 for how alarm works.
When the specified date/time comes, an alarm tone, illumination, subject
of the schedule event and animation corresponding to the set icon notify
you of the schedule event.
You can store up to 2,500 schedule events including i-schedule.
1
m1Stationery1Schedule1i()1New
1Do the following operations.
+m-4-5
<Schedule>
Using Calendar to Manage Schedule
Store Schedule Events
Subject 1Select an icon.
≥When the alarm tone alerts you, the animation corresponding to
the selected icon is displayed.
1Enter a subject.
≥You can enter up to 25 full-pitch/50 half-pitch characters.
≥The subject corresponding to the selected icon is entered in
advance.
Place 1Enter a place.
≥You can enter up to 25 full-pitch/50 half-pitch characters.
All day You can set the schedule event as “All day” without entering
starting and ending date/time.
1OFF or ON
≥When you set to “ON”, the start date/time is set to “0:00” and the
end date/time is set to “23:59” automatically.
Date (from) 1Enter the date and time for starting the schedule.
Date (to) 1Enter the date and time for ending the schedule.
2
Press l().
Repeat 1Select a type of repeat.
≥If you select “Select day”, put a check mark for days of the week
to be set and press l().
Set repeat time.
1Unrestricted or XX times1Enter the repeat time.
≥Enter two digits from “02” through “99”.
≥The item set with repetition is counted as one item.
Alarm 1Select an alarm method.
ON . . . . . . . . . . . Alerts you at the time of the starting date/time of
the schedule event. The setting for alarm
notification is completed.
ON/Set time . . . Alerts you at the time set as the prenotification.
OFF . . . . . . . . . . Does not alert. The setting for alarm notification
is completed.
1Enter the date and time to be alerted.
Tone 1Select a type of alarm tone1Select a folder
1Select an alarm tone.
Details 1Enter details.
≥You can enter up to 300 full-pitch/600 half-pitch characters.
Information
≥If you enter a date on or after 29th in “Date (from)” and set “Repeat” to “Monthly” or
“Yearly”, the last day of the month is set for the schedule event when the month does
not have the specified date.
≥For the schedule event stored as secret data, an alarm message is not displayed
when the alarm sounds in ordinary mode (other than “Secret mode” and “Secret data
only”). An animation for secret data appears.
≥During standby, the alarm tone sounds at the level set for “Phone” of “Ring volume”.
During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).