User's Manual Part 3

338
Map/GPS Function
You can set how to operate when you receive a location provision
request. You can set a validity period when you set to permit the location
provision.
1
m1LifeKit1Map/GPS1GPS settings
1Location request set.
1Enter your Terminal Security Code1Select an item.
ON . . . . . . . . . . . . . . . . . . . .Permits the location provision request by all searchers
and notifies the current location.
OFF . . . . . . . . . . . . . . . . . . .Rejects the location provision request.
Reject numbers unset . . .Permits the location provision request only by the
parties stored in the Phonebook.
Requests from the parties not stored in the Phonebook
are automatically rejected.
Information
≥Even if “Notify when dialing” is set to “ON” or to “Confirm every dial”, you cannot notify
of your current location when you make a call without notifying of your caller ID.
Function Menu while LCS Client is Displayed
Delete
Delete this 1YES
Delete all 1Enter your Terminal Security Code1YES
Add to phonebook You can store the service client name and phone number
stored in “Reg. LCS client” into the Phonebook. (See
page 327)
Edit Go to step 1 of “Register LCS Client” on page 337.
≥You can edit also by pressing l().
Send Ir data See page 384.
Send all Ir data See page 385.
transmission See page 387.
All transmission See page 387.
Location Request Set.
2
YES or NO
3
Press l().
Permit from 1Enter the time for starting permission.
Permit to 1Enter the time for ending permission.
Repeat 1Select a repeat type.
≥When you select “Select day”, put a check mark for days of the
week to be repeated, then press l().
Validity period When you set to “Repeat”, you can set the period to be valid.
1ON or OFF1Enter a validity date (from)
1ON or OFF1Enter a validity date (to).
Information
≥You can set “Location request setting” also by “Initial setting” (see page 44).
≥When you set to permit the location provision, the location information might be sent
without any operation on the FOMA terminal, and might be notified to the searcher.
≥When a location provision request is rejected by the setting of “Location request set.”,
the history is not recorded.
≥You can specify from January 1, 2008 through December 31, 2037 for “Permission
schedule”.
≥When “Reject numbers unset” is set, the location provision requests from all the
parties stored in the Phonebook are permitted regardless of the mode of 2in1.
≥Even if you set to “Reject numbers unset”, you might receive a location provision
request from the party not stored in the Phonebook depending on the function in use.