User's Manual Part 3

420
Convenient Functions
For when the Stereo Earphone Set 01 (option) is connected, you can
select which microphone you use between the microphone of the FOMA
terminal and of the earphone/microphone.
1
m1Set./Service1Other settings
1Headset mic. setting
1Built-in microphone or Headset microphone
1
Enter a phone number
or
call up a Phonebook entry, redial item, dialed call record,
or received call record.
2
Press and hold the switch of the Stereo Earphone Set 01
for at least one second
1Start talking when the other party answers.
A beep sounds and you are connected.
≥You cannot make a videophone call by pressing the switch of the Stereo
Earphone Set 01.
≥You can make a call also by operating the FOMA terminal.
3
After talking, press and hold the switch of the Stereo
Earphone Set 01 for at least one second to end the call.
A beep sounds twice and you are disconnected.
<Headset Microphone Setting>
Selecting a Microphone for Use when an
Earphone is Connected
Information
≥When you connect earphones without a microphone, select “Built-in microphone”.
≥When you connect the Stereo Earphone Set 01 while “Built-in microphone” is set, the
sensitivity of the microphone of the FOMA terminal is improved.
Make Calls Using the Switch
1
During ringing
1Press the switch of the Stereo Earphone Set 01.
A beep sounds and you are connected.
With a videophone call, the image through your camera is sent to the other party.
You can switch between that image and the substitute image by pressing m
during the videophone call. (See page 72)
≥You can answer calls also by operating the FOMA terminal.
≥When “Auto answer setting” is set to “ON”, a call is answered automatically after
the ring time elapses.
2
After talking, press and hold the switch of the Stereo
Earphone Set 01 for at least one second to end the call.
A beep sounds twice and you are disconnected.
Receive Calls Using the Switch
Information
≥Regardless of the setting for “Keypad sound”, a tone for connecting and disconnecting
the line sounds.
≥Note that you might receive a call if you connect the Stereo Earphone Set 01 after the
ring tone sounds.
≥By pressing the switch of the Stereo Earphone Set 01 during answer-hold (On Hold)
or while a call is on hold (Holding), you can release the hold. (While a videophone call
is put on hold, the image through your camera is sent and the videophone call starts.)
≥Do not press or release the switch of the Stereo Earphone Set 01 in succession. You
might automatically receive a call.
≥If you have signed up for Call Waiting Service and “Multi calling” is displayed during a
call, you can switch two calls by pressing and holding the switch of the Stereo
Earphone Set 01 for at least one second. However, you cannot use the switch to end
the call.
≥You can adjust the earpiece volume by pressing .< (raise) or .> (lower) during a call.