User's Manual Part 3

425
Convenient Functions
■Device list
1Device class
The following icons are displayed according to the
type of Bluetooth device:
“”, “”, “”, “”, “”, “”, “”
2Device name
The name of Bluetooth device is displayed.
When no name is detected by search, the Bluetooth
address is displayed.
3Connecting status
：Being connected ：Not connected
：Not detected ：Not registered
4Protect
Displayed when the registered contents are protected.
5Profile state
The state of each profile is displayed in color.
4
3
2
5
1
Device list
Mark
Font
color
Background
color
Frame
color
Status
Blue Gray None Not connected (unregistered)
Blue Gray Blue Not connected (registered)
White Green None Being connected
Green White Green Standby for connection
White Light green None Preferred device
Gray Gray None Not supported
Information
≥When the Bluetooth device is turned off or when the Bluetooth device does not
respond while a connection is being established or being disconnected, it takes
maximum about 110 seconds for processing.
≥When your FOMA terminal is connected using the Headset service, Hands-free
service, Audio service, or Dial-up Communication service, and is disconnected from
the Bluetooth device, the FOMA terminal is placed on standby for connection. Also,
your FOMA terminal is placed on standby for connection the next time the power is
turned on after the FOMA terminal is turned off while it is connected or is on standby
for connection.
Function Menu of the Device List
Register devices Go to step 3 on page 424.
Preferred device You can set a Bluetooth device to be connected taking priority
over other devices when a call comes in. You can set this for the
Headset service compatible Bluetooth device only.
≥When you already set another Bluetooth device for “Preferred
device”, that setting is canceled, and the selected Bluetooth
device is set for the priority device.
≥To release it, perform the same operation.
Protect/release You can protect the registered Bluetooth device so that it is not
deleted or overwritten. You can protect up to five devices.
≥To release it, perform the same operation.
Change device
name
You can change the name of the registered Bluetooth device.
1Enter a device name.
≥You can enter up to 16 full-pitch/32 half-pitch characters.
Delete You can delete the registered Bluetooth device.
1YES
Description You can display the device name, Bluetooth address, device
class, and supported profile.
Add desktop icon See page 31.
Information
<Register devices>
≥When you select a registered Bluetooth device, the registered profile is updated.
(When the device name has been changed, the profile is retained as it is.) When you
select a profile that is different from the registered one, the profile is added and then
registered.
<Preferred device>
≥Even when Preferred Device is set, you cannot connect that device unless the
Headset service is placed on standby for connection. When other Bluetooth device is
connected with the Headset service, the Bluetooth device that is being connected has
priority.
<Delete>
≥You cannot delete when the status of Bluetooth device is during connection or on
standby for connection.