User's Manual Part 3

426
Convenient Functions
You can place the connecting state of all the registered Bluetooth
devices on standby for connection.
1
m1LifeKit1Bluetooth1Accept registered
1Put a check mark for the services to be placed on
standby1l()
≥To release, remove the check mark and press l().
≥During standby, “ (blue)” lights.
You can suspend all the services that are connected or on standby for
connection, and suspend off the Bluetooth function of the FOMA
terminal.
1
m1LifeKit1Bluetooth1Bluetooth power OFF1YES
≥You can activate the standby for connection for the previously-connected
Bluetooth device by m1LifeKit1Bluetooth1Activate Bluetooth.
You can talk or communicate by connecting the FOMA terminal
wirelessly with a Bluetooth communication compatible personal
computer or car navigation system and others. For details, refer to
“Preparing Bluetooth Communication” on the PDF version of “Manual
for PC Connection”.
You can make a call wirelessly when the FOMA terminal is connected to a
Bluetooth device using Headset service or Hands-free service.
1
Connect a Bluetooth device using Headset service or
Hands-free service.
≥See page 424 for connecting to a Bluetooth device.
2
Make/Receive a call via the Bluetooth device.
“ ” is displayed during a call via the Bluetooth device.
≥For operations from a Bluetooth device, refer to the instruction manual for the
Bluetooth device.
Accept Registered
Bluetooth Power OFF
Accept Dialup Devices
Make a Call
Press and hold d for at least one second during a call.
≥You can switch also by pressing i( ) and selecting “Talk on BT/Phone”.
≥During a call with the FOMA terminal while connecting using Headset service, you can
switch only from the Bluetooth device.
≥For operations from the Bluetooth device, refer to the instruction manual for the
Bluetooth device you use.
≥Even if you switch to the Bluetooth device, you cannot talk over a Bluetooth device
while USB Hands-free compatible device, earphone/microphone (option), or Flat-plug
AV Output Cable (option) is connected.
≥You cannot switch to a Bluetooth device while Remote Monitoring is activated.
When you connect your FOMA terminal to a Bluetooth device using
Audio service, you can output the audio of 1Seg programs from the
Bluetooth device.
1
Connect a Bluetooth device using Audio service.
≥See page 424 for connecting to a Bluetooth device.
Selecting whether to talk over the FOMA terminal or a
Bluetooth device
Information
≥During Lock All or Omakase Lock, you cannot answer calls via the Bluetooth device.
≥When a call comes in while the Bluetooth device is connected using Headset service
or Hands-free service, the ring tone sounds from the Bluetooth device even if Manner
Mode is activated or “Ring volume” is set to “Silent” on the FOMA terminal.
≥During a call on the Bluetooth device, you cannot adjust the sound volume of the
Bluetooth device by adjusting that on your FOMA terminal.
≥During a call on the Bluetooth device, the call state does not change by closing the
FOMA terminal regardless of the setting of “Setting when closed”.
≥When the Bluetooth communication is disconnected during a call on the Bluetooth
device, the call state follows the setting of “Disconnection settings”.
Play Back Audio of 1Seg Programs