User's Manual Part 3

427
Convenient Functions
2
Watch a 1Seg program.
The sound is output from the Bluetooth device.
≥Once you connect the FOMA terminal to the Bluetooth device using Audio
service, a connection history is stored. When the connection history is found, the
FOMA terminal tries to connect to the Bluetooth device automatically for watching
a 1Seg program even if it is not connected using Audio service. When the
connection is successfully completed, the audio is output from the Bluetooth
device. When the connection fails, the confirmation display appears asking
whether to output audio from the FOMA terminal.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
≥For operations from a Bluetooth device, refer to the instruction manual for the
Bluetooth device.
Information
≥You can output the audio of 1Seg programs only on an A2DP compatible Bluetooth
device that supports copyrighting by the SCMS-T.
≥While the audio of a 1Seg program is output from a Bluetooth device, you cannot
adjust the sound volume of the Bluetooth device by adjusting that on your FOMA
terminal.
≥You cannot output the audio from the Bluetooth device when an earphone/
microphone (option) is connected.
≥If the audio from a 1Seg program stops while it is output on the Bluetooth device,
check your FOMA terminal as the possible causes are as follows:
･When the Bluetooth device is disconnected
･When a location provision request of GPS comes in
･When a mail message or Message R/F comes in
･When a PushTalk call comes in
･When the low battery alarm sounds
･When an alarm for “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.
When you connect your FOMA terminal to a Bluetooth device using
Audio service, you can output the sound of movies or video, music via
MUSIC Player, etc., from the Bluetooth device.
1
Connect a Bluetooth device using Audio service.
≥See page 424 for connecting to a Bluetooth device.
≥If you connect using Audio service from the Bluetooth device while placing an
Audio service on standby for connection, MUSIC Player starts automatically.
However, it might not start automatically when a display other than Stand-by
display is shown or another function is activated.
2
Play back a movie, video or music file.
The sound is output from the Bluetooth device.
≥When the confirmation display appears asking whether to start output to the
Bluetooth device, select “YES”.
≥Once you connect the FOMA terminal to the Bluetooth device using Audio
service, a connection history is stored. When the connection history is found, the
FOMA terminal tries to connect to the Bluetooth device automatically for playing
back a file even if it is not connected using Audio service. When a connection is
successfully completed, the sound is output from the Bluetooth device. When the
connection fails, the confirmation display appears asking whether to output sound
from the FOMA terminal. However, it cannot connect to automatically for playing
back an i-motion movie.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
≥For operations from the Bluetooth device, refer to the instruction manual for the
Bluetooth device you use.
Play Back Sound/Music of Movie or Video
Information
≥You can output the audio of video file only on an A2DP compatible Bluetooth device
that supports copyrighting by the SCMS-T.
≥While you are playing back the sound of a movie, video, or music file from a Bluetooth
device, you cannot adjust the sound volume by adjusting that on your FOMA terminal.
≥Even when you are using Play Background for MUSIC Player or Music&Video
Channel, the remote-control operation for Bluetooth device is available.
≥You cannot output the audio from the Bluetooth device when an earphone/
microphone (option) is connected.