User's Manual Part 3

428
Convenient Functions
1
m1LifeKit1Bluetooth1Bluetooth settings
1Do the following operations.
≥You cannot operate during a call or data communication.
≥If the sound of a movie, video, or music file stops while it is played back on the
Bluetooth device, check your FOMA terminal as the possible causes are as follows:
･ When the Bluetooth device is disconnected
･ When a location provision request of GPS comes in
･ When a mail message or Message R/F comes in
･ When a PushTalk call comes in
･ When the low battery alarm sounds
･ When an alarm for “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.
≥When you activate MUSIC Player with a Bluetooth device connected and the
Bluetooth device is disconnected from the FOMA terminal which is closed, MUSIC
Player ends.
Bluetooth Settings
Information
Set authentications You can set whether to set authentication when sending a
Phonebook entry via a Bluetooth device. If you set to “ON”, set
whether to encrypt the data.
1ON or OFF1ON or OFF
Session number
setting
You can set whether to enter the password for sending all
Phonebook entries.
1ON or OFF
Time-out to search You can set the time for searching for Bluetooth communication
compatible devices around the FOMA terminal.
1Enter a device search time (seconds).
≥Enter two-digit numerals as in “05” through “20”.
Forward ring tone You can set whether to send a ring tone for the voice call and
videophone call to the connected Headset or Hands-free device.
When the device is specified as “Preferred device”, connection is
made to send the ring tone even if the device is on standby.
1ON or OFF
Disconnection
settings
You can select whether to end talking or continue talking on the
FOMA terminal when Bluetooth communication is disconnected
while talking through the Headset or Hands-free device.
1End the call or Continue on the phone
Dial from headset You can set whether to make a call by pressing the switch on the
Headset.
1Valid or Invalid
Bluetooth info You can display the device name, Bluetooth address, device
class, and supported profiles of Bluetooth function mounted on
the FOMA terminal. You can change the device name.
≥To change the device name, press l( ), enter the
device name. You can enter up to 16 full-pitch/32 half-pitch
characters.
Information
<Set authentications>
≥While a Bluetooth device to which Phonebook entries are sent is connected using a
service other than Object Push, the Phonebook entries are sent with authentication
and with encryption regardless of this setting.
≥You cannot set this function while a Bluetooth device is connected or on standby for
connection.
<Forward ring tone>
≥You cannot set this function while a Bluetooth device using the Headset service or
Hands-free service is connected or on standby.
<Bluetooth info>
≥If you select a pictogram for the device name, it might not be correctly displayed
depending on the destination Bluetooth device.