User's Manual Part 1

67
Voice/Videophone Calls/PushTalk
Quick silent
The following are the keys you can press to stop the ring tone, vibrator or voice
guidance:
When “Setting when opened” is set to “Keep ringing”, you can stop the ring tone,
vibrator or voice guidance also by opening the FOMA terminal in Normal Style.
Even if you stop it, the other party still hears a ringback tone.
After you stop the ring tone, vibrator or voice guidance, you can start talking by
pressing d, Oo, m (for videophone calls), or p (for PushTalk calls).
OFF
You can start talking by pressing a key shown below:
※1 You can activate Any Key Answer or Quick Silent also by pressing l when
five record messages have already been recorded.
※2 During Key Lock, you can activate Any Key Answer and Quick Silent by
pressing and holding < for at least one second.
※3 While “ ” is displayed, you cannot activate Any Key Answer or Quick
Silent by pressing c.
Voice call
※1※2
0 through 9, a, s, r, m, c
※3
, No, <, v
Videophone call
※2
0 through 9, a, s, r, c
※3
, No, <, v
PushTalk call 0 through 9, a, r, l, c, Bo, <
Voice call d, Oo
Videophone call d, Oo, m
PushTalk call d, Oo, p
Information
While an earphone/microphone (option) is connected, you can press the switch to
start talking, regardless of “Answer setting”. (See page 417)
1
mSet./ServiceIncoming call
Setting when opened Select an incoming type
Keep ringing or Answer
Keep ringing . . .You can keep the incoming call ringing.
Answer . . . . . . .You can answer the incoming call. For videophone calls, the still
image set for “Substitute image” of “Select image” is sent to the
other party.
1
mSet./ServiceTalkSetting when closed
Phone/VideophoneSelect an item.
No tone . . . . . . .The voice is muted. The hold tone does not sound. The setting is
completed.
Hold . . . . . . . . . .The other party hears the hold tone set for “Holding tone” of “Hold
tone setting”. For videophone calls, the still image set for
“Holding” of “Select image” is displayed.
End the call. . . .The call is finished. This is the same operation as pressing h
during a call. The setting is completed.
2
Speaker ON or Speaker OFF
Speaker ON. . . . . The hold tone sounds from the speaker.
Speaker OFF. . . . The hold tone does not sound from the speaker.
<Setting when Opened>
Setting Response for when Opening
FOMA Terminal while Ringing
Information
You cannot answer calls by opening the FOMA terminal in Horizontal Open Style
even when “Answer” is set.
+m-1-8
<Setting when Closed>
Setting Response for when Closing FOMA
Terminal during a Call
Set Response for when Closing FOMA Terminal during a
Voice Call/Videophone Call