User's Manual Part 2

413
Convenient Functions
You can confirm the last and accumulated call duration and cost for
voice calls and videophone calls.
Displayed call duration and cost are for reference and might differ from the actual ones.
In addition, the consumption tax is not included in the call cost.
Both the voice call duration and digital communications duration (videophone call
duration + 64K data communication duration) are displayed and both incoming and
outgoing calls are included in the duration.
The call cost is for the outgoing calls only. However, “¥0” or “¥＊＊” is displayed for toll
free calls such as Free Dial or for Directory Assistance Service (104), etc.
The call cost is accumulated on the UIM. Therefore, when you replace the UIM, the
charge accumulated on the UIM in use is displayed. (accumulation from December
2004)
You can reset the displayed call duration and call cost.
1
mSet./ServiceCall time/costCall data
Last call duration
Talk: Displays the call duration of the latest voice call.
Digital Videophone: Displays the call duration of the latest videophone call.
Non-limiting digital: Displays the call duration of the latest 64K data
communication.
Last call cost
Talk: Displays the call cost for the latest voice call.
Digital Videophone: Displays the call cost for the latest videophone call.
Non-limiting digital: Displays the call cost for the latest 64K data communication.
Total calls duration
Talk: Displays the call duration of voice calls from the time Reset Total Duration
was executed to the current time.
Digital: Displays the call duration of videophone calls and 64K data
communication from the time Reset Total Duration was executed to the
current time.
You cannot record a movie memo while operating each item in the Function menu.
+m-6-1
<Call Data>
Checking Call Duration/Charge
Information
Total calls
Displays the call cost from the time Reset Total Cost was executed to the current
call.
Calls reset
Displays the date and time when Reset Total Duration was executed last time.
Cost reset
Displays the date and time when Reset Total Cost was executed last time.
1
mSet./ServiceCall time/cost
Reset total cost&dura.
Enter your Terminal Security Code
Do the following operations.
Information
When Last Call Duration exceeds “19 hours 59 minutes 59 seconds”, or Total Calls
Duration exceeds “199 hours 59 minutes 59 seconds”, “0 s” returns to re-count the
time.
If you switch between the voice call and videophone call during a call, the call duration
and call cost are counted respectively for the calls. You are not charged while
“Changing” (see page 53) is displayed.
The duration/charge for PushTalk, i-mode communication and packet communication
are not counted. For how to check the i-mode fee, refer to “Mobile Phone User’s
Guide [i-mode] FOMA version” which is supplied on your i-mode contract.
The charge for Chaku-moji is not counted.
The international call fee for using WORLD CALL is counted. The fees for using other
international call services are not counted.
The duration for ringing and calling is not counted as call duration.
If you turn off the power or remove the UIM, Last Call Duration is reset to “0 s”; and
Last Call Cost is reset to “¥＊＊”.
+m-6-0
<Reset Total Cost&Duration>
Resetting Total Duration/Total Cost
Reset total duration You can reset Last Call Duration and Total Calls Duration to “0 s”.
YES
Reset total cost You can reset Last Call Cost and Total Calls to “¥0”.
YESEnter the PIN2 code.
See page 124 for PIN2 code.