User's Manual Part 1
54
Voice/Videophone Calls
When making a voice call or videophone call, you can send your text
message to tell the subject during calling.
For details on Chaku-moji or compatible models, refer to DOCOMO website or “Mobile
Phone User’s Guide [Network Services]”.
The sending end is charged, but the receiving end is not charged.
A Chaku-moji message is displayed below a caller. The
Chaku-moji message is stored in Received Calls as well.
The Chaku-moji message is displayed only during ringing. It
is not displayed during a call.
Even when a Chaku-moji message comes in within the ring
start time set by “Ring time”, it is received and recorded in
Received Calls.
The Chaku-moji message is not displayed during Lock All, Omakase Lock, or Personal
Data Lock. However, you can check the Chaku-moji message from Received Calls
after the lock is released.
Sent address
[Redial/Dialed Calls only]
See page 158.
Received address
[Received Calls only]
See page 158.
Delete
Delete this YES
Delete selected Put a check mark for redial items, dialed call records, or
received call records to be deletedl()YES
Delete all Enter your Terminal Security CodeYES
Information
<Delete>
If you execute “Delete all” from the Function menu of Redial/Dialed Calls, all records
in both Redial and Dialed Calls are deleted. Even if you execute “Delete this” or
“Delete selected” of Redial, the records are not deleted from Dialed Calls and they are
retained. To delete the dialed call records, delete them from the Function menu while
“Dialed calls” is displayed.
<Chaku-moji>
Using Chaku-moji
When a message is received
You can store up to 10 Chaku-moji messages in the Message list.
1
mSet./ServiceNW servicesChaku-moji
Create message
Highlight <Not stored> and press l()
Enter a message.
To edit a stored message, highlight it and press l().
You can enter up to 10 characters regardless of whether they are pictograms,
symbols, or full-pitch/half-pitch characters.
1
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
2
i
()
Chaku-moji
Do the following operations.
3
Press d or Oo().
Press l( ) to make a videophone call.
The Chaku-moji message being sent is displayed while you are dialing.
Store Messages
Make a Call with a Message
Create message You can create a Chaku-moji message just before dialing.
Enter a message.
You can enter up to 10 characters regardless of whether they
are pictograms, symbols, or full-pitch/half-pitch characters.
The Chaku-moji message created using this function is not
stored in the Message list.
Select message From the Message list, you can select a stored message.
Select a message.
Sent messages From the Sent Message list, you can select a Chaku-moji
message to be sent. Up to 10 sent Chaku-moji messages only
are stored in the Sent Message list. If you send the same
Chaku-moji message, the older one also remains. When the
number of sent Chaku-moji messages exceeds 10, the
messages are deleted from the oldest one.
Select a sent message.