User's Manual Part 1

62
Voice/Videophone Calls
1
When you receive a call, the ring tone
sounds and the Call/Charging indicator
flickers.
To vibrate the FOMA terminal for incoming calls, set
“Phone” or “Videophone” of “Vibrator” to other than
“OFF”.
While the phone is ringing for a videophone call,
“Incoming V.phone” is displayed. However, while
ringing for a voice call, this kind of indication is not
displayed.
“ ” is displayed at the upper left of the phone
number for incoming international calls.
2
Press d or Oo( ) to answer
the call.
Receiving a Call/Videophone Call
Chaku-moji message
(See page 54)
For Answering a Voice Call
Press d or Oo () to answer
the videophone call.
You can send the substitute image to the other party.
Press m during a videophone call to switch between
the substitute image and image through your camera
for sending to the other party.
3
Press h to end the call after talking.
For Answering a Videophone Call
Information
If you close the FOMA terminal during a call, the FOMA terminal works in accordance
with the setting of “Setting when closed”. (See page 65)
You might hear beeps (in-call ring tone) during a call.
If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call
Forwarding Service and set “Arrival call act” to “Answer”, the beeps (in-call ring tone)
will sound for another incoming call, enabling you to do the following operations:
Voice Mail Service
. . . . Transfer the call to the Voice Mail Service Center. (See page 416)
Call Waiting Service
. . . . Put your current call on hold and answer the incoming call. (See page 416)
Call Forwarding Service
. . . . Transfer the call to the registered forwarding destination. (See page 419)
You can set “Reject unknown” not to accept calls from the phone numbers that are not
stored in the Phonebook.