User's Manual Part 1

74
Voice/Videophone Calls
You can set whether to switch to Hands-free automatically for when a
videophone call starts.
1
mSet./ServiceVideophone
Hands-free w/ V. phoneON or OFF
See page 61 for the operation while Hands-free is activated and how to switch to
Hands-free.
You can set the quality of the received image on the display.
1
mSet./ServiceVideophoneVisual preference
Select an image quality.
“Prefer motion spd” is effective when there is motion in an image. When there is
little motion, the quality becomes better if you set to “Prefer img qual”.
If you operate from the Function menu during a videophone call, the setting is
effective only for the current videophone call.
<Hands-free with Videophone>
Setting Hands-free Videophone
<Visual Preference>
Setting Image Quality for Videophone
Calls
Information
If the radio wave conditions weaken during a videophone call, the image may appear
like a mosaic.
You can set an image to be sent to the other party.
1
mSet./ServiceVideophoneSelect image
Select an item.
On hold. . . . . Sets an image for during answer-hold (On hold).
Holding . . . . . Sets an image for while a call is on hold (Holding).
Substitute image
. . . . . . . . . . . . Sets a substitute image (still image or Chara-den) for when the
camera is off.
Record message
. . . . . . . . . . . . Sets an image while recording a record message.
Preparing . . . Sets an image for while playing back an answer message.
Movie memo
. . . . . . . . . . . . Sets an image for while recording a movie memo.
2
Select an image.
Pre-installed. . . For sending a pre-installed still image to the other party.
Original . . . . . . . For sending an appropriate message with a still image stored
using “Set display”.
Chara-den. . . . . For sending a Chara-den image selected by “Substitute image”
from the Function menu while a Chara-den image is displayed.
(See page 71)
(Displayed only when “Substitute image” has been selected in
step 1.)
Press l( ) to play back a demo to check the still image or Chara-den
image.
To change the setting of “Original” or “Chara-den”, press i( ), select
“Change setting”, then select a still image or Chara-den image. If you have
selected “Original”, select a still image after selecting a folder.
<Select Image>
Changing Image Displays for Videophone
Calls
Information
Even if you delete the still image selected from “Original”, that still image is displayed
to the other party. To change, set by “Change setting” or “Set display”.