Call Making/Answering Voice Calls ............................. 2-2 Call Log............................................................... 2-13 Making Voice Calls .....................................................................2-2 Outgoing Call Functions .............................................................2-3 Emergency Calls (110, 119, 118) ................................................2-4 Answering Voice Calls.................................................................
Making/Answering Voice Calls 2 Call Making Voice Calls Tip Before Calling Confirm signal strength ( P.1-10) If any of these indicators appear: P.1-10, P.1-11, P.19-12) Calls cannot be made ( 1 Enter a phone number 2 Confirm the number, then 3 Include area code for all numbers. To adjust volume: or to end call Call Time appears. Correcting Misentries Use to place cursor at digit to delete, then . to delete the digit and all digits to the right of cursor.
Sending Touch-tone Signals Outgoing Call Functions [Menu] Notify caller ID > Enter number To cancel setting: [Menu] Notify caller ID Setting Caller ID on/off (Caller ID: P.2-21) OFF or ON Cancel prefix Adding Prefix to Phone Number ■ Save Prefix > Main Menu Settings Call Settings Prefix Highlight [Edit] Enter a name Enter a prefix number Up to seven entries can be saved. To check entries: Select a saved prefix.
Emergency Calls (110, 119, 118) 2 Call Call 110 (Police), 119 (Fire & Ambulance) or 118 (Coast Guard) even when some handset restrictions are active. Calls Cannot be Made in Following Cases: When Set Max Cost Limit is ON and charge limit is reached In PIN/PIN2, PUK/PUK2 entry window 2-4 Emergency Positioning Request When an emergency call is made from a mobile phone, location is reported to first response agencies such as the police.
Tip Answering Voice Calls When a Call Arrives… P.11-11) ( 940P rings; Notification Light flashes. Settings ●Change Answer Setting ●Answer Calls by Opening Handset ( If Caller ID is sent, number appears in Display; if saved in Phone Book, caller's name appears. appears at upper left of caller's When an International call arrives, phone number. 1 2 to talk To adjust volume: or P.18-7) Incoming Call Functions Following operations are available for incoming calls.
Making/Answering Video Calls 2 Exchange video/sound with video call-compatible mobiles. Call Send Alternative Picture (still image) or video Image via Outside Camera. Example: Outgoing Video Call by Default Video Call Indicator Tip ●Remote Monitoring ( Video Call Window P.2-8) Incoming Image Note Only available within 3G network coverage. 940P is 3G-324M compliant; calls connected via different systems may be disconnected (charges apply). Increasing Speaker volume may cause interference.
Tip Making Video Calls Confirm signal strength ( P.1-10) If any of these indicators appear: Video Calls cannot be made ( P.1-10, P.1-11, P.19-12) 1 Enter a phone number 2 Confirm the number, then 3 Call Fails ( 2 Call Before Calling ●Outgoing Call Functions ( P.2-3) ●Operations Available during a Video Call ( P.2-12) ●Making Calls from Call Log ( P.2-14) ●Other Ways to Add New Entries ( P.4-5) ●Making Calls from Phone Book ( P.
Tip Answering Video Calls 2 Call ●Adjust Ringer Volume ●Incoming Call Functions ( P.2-5) ●Operations Available during a Video Call ( P.2-12) When a Video Call Arrives… 940P rings; Notification Light flashes. If Caller ID is sent, number appears in Display; if saved in Phone Book, caller's name appears. When an International call arrives, appears at upper left of caller's phone number.
■ Select Numbers from Phone Book/Call Log [Menu] > In Step 2, highlight Select an item Select a number ) [Menu] Make a Video Call to 940P from a preset phone number After ring time elapses, Remote Monitoring starts. A Video Call starts if 940P answers before auto answer activates. 2 To quit Remote Monitoring, side) (caller or recipient 2 Calling Abroad from Japan Application not required. For details, go to: http://mb.softbank.
Calling while Abroad 2 Call May require application to Global Roaming Service. Download and take Global Roaming Guide when traveling abroad. For details, go to: http://mb.softbank.jp/en/global_services/global_roaming Note In Step 1, to dial number as is, enter an IDD Prefix and a country/region code directly or select an entry with an IDD Prefix and a country/region code. Example: When Roaming Dial Assistant is ON Roaming Dial Assistant ( 1 Right) is set to ON and Japan by default.
■ Network Mode Automatically Select an item (See below) Item Operation/Description Automatically 3G/GSM service area in Japan or abroad. 940P selects 3G network in Japan or an available network automatically using area (network condition) abroad. Manually > Select an item ・3G/GSM : 3G/GSM service area in Japan or abroad. 940P selects an available network using area (network condition). ・3G : 3G service area in Japan or abroad ・GSM : GSM service area abroad.
Engaged Call Functions 2 Call Operations Available during a Voice Call Adjust Volume > Adjust Volume > Place Call on Hold Speaker ON/OFF Record Conversation / Adjust volume within two seconds. Adjusted volume is retained even after calls end or handset is turned off. > [Hold] To resume call: Toggle Speaker or Earpiece > Record for about three minutes per call [Rec] > Press and hold or [Stop], or press and hold To end recording: Operations Available during a Video Call To play back recorded data: P.
Account Details Key Guide Toggle handset or Bluetooth® device > [Menu] Talk on BT/Phone Bluetooth or Phone > [Menu] Back light Constant light or 15 seconds light > [Menu] V. Call settings Follow the steps for selected item ( P.18-12) Activate/deactivate auto image compensation > [Menu] LCD AI ON or OFF > [Menu] Account details > [Menu] Key guide Call Log Incoming and outgoing call records appear here. Use these records to call back.
Viewing Call Logs 2 Call 1 Making Calls from Call Log Redial 1 2 Outgoing Call Logs Phone Book Call Log Outgoing Call Logs TBD Incoming Call Logs Records appear. To show Received/Sent address logs: [Change] Left) Voice Calls Highlight a phone number or name Video Calls Highlight a phone number or name [V. Call] International Calls Redial ■ View Missed Calls > Main Menu Phone Book Call Log Incoming Call Logs Missed Calls Unknown Calls appears in Call Log for unchecked calls.
Functions Available from Call Log Available functions vary by selected log/record. Item Notify caller ID Prefix numbers Int’l dial assist Character size Add to Phone Book Ring time 1 Add shortcut icon Compose S! Mail Compose SMS 2 Received address/ Sent address Delete this/ Delete selected/ Delete all 1 2 Operation/Description Notify or withhold your Caller ID ( P.
2 Call Playing Messages Call Data When a new message is recorded, Event Indicator appears ( P.1-21) in Standby. Record one Voice Call (up to 3 minutes). Record up to 5 Video Calls (up to 20 seconds for message). 1 2 TBD Select indicator Select a message Playback starts. After playback ends, indicator disappears.
Answer Phone/Call Data Functions Main Menu Tools Sound Recorders ■ Select Answer Message/Set Ring Time >Answer Phone Setting ON Select an answer message Enter ring time When Answer Phone and Optional Service (Voice Mail or Call Forwarding) are both active, function with shorter ring time takes priority. For example, if Answer Phone ring time is 18 seconds and Optional Service is 20 seconds, Answer Phone responds first (Priority may change due to signal conditions.).
Call Forwarding 2 Call Call Forwarding and Voice Mail cannot be set simultaneously. When forwarding Video Calls, set a destination phone that supports 3G-324M standard video calls. If not, Video Calls are not forwarded. Activating Call Forwarding Main Menu Settings Call Settings Voice Mail/Call Fwding Call Forwarding ON 1 2 Select a type 3 Select an item (See below) Enter a destination phone number to select number from Phone Book.
Voice Mail Activating Voice Mail Main Menu Settings Call Settings Voice Mail/Call Fwding Voice Mail ON 1 Select an item (See below) Item Ringer ON Ringer OFF Operation/Description Forward missed calls > Select a ring time YES Forward all calls without ringing/vibrating >YES ■ Check Voice Mail Status > Main Menu Settings Call Settings Get Status Voice Mail/Call Fwding ■ Cancel Voice Mail > Main Menu Settings Call Settings Deactivate All YES Voice Mail/Call Fwding 2 Call Calls are forwarded to Voic
> 2 Voice Mail Notif. [ ]( Call Indicator ■ Delete > Main Menu Settings Call Settings Delete Voice Mail Icon YES P.2-20).
Bar All Outgoing and Bar All Incoming are not available when Call Forwarding or Voice Mail is active (Call Forwarding or Voice Mail takes priority). Security Code is required ( P.1-28).
Caller ID 2 Network Set Call Main Menu Settings Call Settings Show My Number Activate 1 ON , OFF or Network Set Network Set Caller ID setting varies by subscription.
Text Entry Text Entry.............................................................. 3-2 Entering Text......................................................... 3-3 3 Entering Characters ....................................................................3-3 Pictographs & Symbols ...............................................................3-4 Smileys.......................................................................................3-5 Templates.........................................................
Text Entry 3 Enter alphanumerics, hiragana, kanji, katakana, symbols and pictographs. Text Entry Three types of character input methods are available: Mode 1 (5-touch), Mode 2 (2-touch), Mode 3 (NIKO-touch) In this guide, examples are described in Mode 1 (5-touch). ❶ ❷ ❸ TBD ❹ Mode 2 (2-touch)/Mode 3 (NIKO-touch) Press two numeric keys to enter a character. List of Key Assignments ( P.19-15 to 17) ■ Help Help describes text entry operations.
■ Other Input Functions Entering Text Enter katakana/ alphanumerics Entering Characters 1 In alphanumerics mode, twice to switch to kanji (hiragana) mode す: ず: き: three times three times twice * When the next character is on the same key, press cursor. 2 TBD Enter upper case characters * Add ゛or ゜ first to move Insert line break to enter Predictive Candidates List To change word before converting, press .
Pictograph/Symbol List Log Pictographs & Symbols Pictographs do not appear in messages sent to incompatible SoftBank handsets or e-mail. Symbol List: P.19-18 3 Text Entry 1 Pictographs Pictograph Indicators Symbols Press and hold , or when pictograph list is open, List Log may appear first. Pictograph List Number Symbol List Number TBD Functions Available in Pictograph/Symbol List ( 2 3-4 In symbol list log, single-byte symbols appear in upper half of list log and double-byte in lower half.
■ Functions Available in Pictograph/Symbol List Toggle symbol lists In symbol list, [Switch] Toggle lists: (Log ) Single-byte symbols Double-byte symbols Alternatively, toggle lists by symbol list number (1-3) Jump to next page In pictograph/symbol list, [Next] Jump to previous page IIn pictograph/symbol list, [Prev.
Templates 3 Insert templates (greetings, URLs, emoticons) or edit preinstalled templates. Text Entry Inserting Templates 1 2 Select a category 1 2 Not available in number mode. Select a template Input assistance [Menu] Editing Templates Main Menu 1 2 Tools [Menu] Edit folder name Reset name YES Additional Features In text entry window, press and hold Note Alternatively, in a text entry window, Templates to enter a template Templates/Users Dic.
Conversion Methods (Japanese) Predictive Conversion Predictive Before Candidates Entering (Pre-text Text* Predict) Lists likely conversions used for beginning of text Example: こんにちは, お疲れさま, etc. Tip Settings ●Set Learning Feature Off for Secret Mode/Secret Data Only ●Delete All Learned Words ( P.18-10) 3 Text Entry The following suggestion lists appear while entering text or after a word is fixed. Note 940P learns entered characters and suggests them for future conversions ( P.3-8).
Example: Enter 私の鼻 3 1 6 In kanji (hiragana) mode, to move to Conversion to select Candidates List 鼻 わ is entered and Predictive Candidates List Text Entry TBD appears. 2 to move to Predictive to select 私 Candidates List TBD 私 is entered and Context Forecast List appears. If the Word is Not Listed 3 to move to Context Forecast to select の List の is entered and Context Forecast List appears. 4 Using Previously Entered Words はな is entered and Predictive Candidates List appears.
Converting Hiragana to Katakana/ Alphanumerics Narrowing Down Predictive Candidates by Number of Characters In kanji (hiragana) mode, narrow down Predictive Candidates by specifying number of characters. Example 1: Enter OK Step 1 2 Example: Show word suggestions of seven or more characters starting with かさ Key Display Press (3 times) (twice) 3 [a1Kana] abc/123/Kana Candidates after highlighting OK.
Editing Text 3 Deleting & Replacing Text Entry 1 Delete Characters within Lines Place cursor before a character A character after cursor is deleted. to delete all characters after cursor. Press and hold Copy/Cut/Paste Copy/cut text to save, then paste to another place. 1 2 Delete Characters from the End of Text Place cursor at the end of text A character before cursor is deleted. to delete all characters before cursor.
Download Dictionary Save frequently used words/phrases (up to 100 entries). Saved words/phrases appear among word suggestions. Download dictionaries from P-egg, a download site for 940P users (see below). Activate downloaded dictionaries to add character conversions to conversion suggestions (Japanese).
Phone Book Overview .............................................................. 4-2 Saving to Phone Book .......................................... 4-3 4 Phone Book Entry Items ..............................................................4-3 Create New Entry .......................................................................4-3 Other Ways to Add New Entries ..................................................4-5 Setting Groups .........................................................................
Overview Save frequently used phone numbers and mail addresses to Phone Book. 4 Phone Book Supplement phone numbers and mail addresses with birthday, street address, an image or notes. TBD Set tones/image for each entry. TBD Note Back-up Important Information Keep a separate copy of Phone Book entry information. When battery is exhausted or removed for extended periods, entries may be lost. Handset damage may also affect data recovery. SoftBank is not liable for damages from lost/altered entries.
Saving to Phone Book Create New Entry Phone Book Entry Items Save new entries to 940P or USIM Card Phone Book. Save up to 1000 entries in Phone Book. Save phone numbers or mail addresses etc. in USIM Card Phone Book. Basic item Incoming Settings Phone Book Entry Items Name (Reading) Group Phone number Mail address Address Location information Birthday Memo Image Memory number Ringtone Vibrator Notification Light Screen Msg Ringtone Msg Vibrator Msg Notif.
Item Group 4 Phone Book Operation/Description Save as a group member. Entries can be searched by the group. > Select a group Change group name or set ringtone by the group ( P.4-6). > Enter phone number ( For 940P, select an icon) Phone number Mail address > Enter mail address ( For 940P, select an icon) Save only phone number if mail address is "phone number@softbank.ne.jp".
4 [Finish] Other Ways to Add New Entries 1 2 Highlight a record Add to Phone Book [Menu] 4 Phone Book Save currently displayed phone numbers, mail addresses, still images or location information to Phone Book. Example: Saving Numbers from Incoming Call Logs Note Press [Menu] from a function. If Add to Phone Book appears, the information is savable to Phone Book.
Searching/Using Phone Book Setting Groups Making Calls from Phone Book Sort entries by Group. Custom set ringtones/vibrators/ notifications per group. 4 Main Menu Phone Book Group Phone Book appears for USIM Card Group. 1 Highlight a group Set item [Edit] Select an item Enter group name for " Group name." For other item operations: P.4-4 Custom settings unavailable for USIM Card Groups.
5 Voice Calls Using Phone Book Highlight a phone number Video Calls Highlight a phone number [V. Call] ■ Additional Search/Dialing Methods Open Tab Assigned to Key from Standby Enter Partial Number from Standby or during Call By Memory Number By Single-digit Memory Number (2-touch Dial) Press and hold – Open search window assigned to key. Enter partial number Enter a memory number – ) of memory Enter last digit ( / number 000-009 Voice Call: [V.
■ Use Entry Details Select an entry > 4 Phone Book Item Notify caller ID Prefix numbers Int'l dial assist Restrictions* Edit Phone Book Delete phone book [Menu] Select an item (See below) Operation/Description Show/hide caller ID ( P.2-3) Make a call using a prefix number ( Set International dial assist ( P.2-3) P.2-10) Activate restrictions on specified entry ( Edit entry ( From Step 3 on P.4-4) P.
Managing Phone Book Editing Phone Book Entries Select an entry Edit ( From Step 3 on P.
S! Addressbook Back-up 4 Phone Book 4-10 Back up Phone Book entries to S! Addressbook (network server); synchronize 940P Phone Book with S! Addressbook; restore Phone Book after accidental loss/alteration. Separate subscription is required for this service. Notes Fully charge battery beforehand ( appears). Transmission fees apply to synchronization, backup and restoration. Restore deletes all 940P Phone Book contents.
Manual Synchronization Auto Synchronization Regular Update Main Menu 1 Phone Updating by Selecting Sync Type Main Menu Phone Backup/Restore 1 Details Select an item (See below) Item Sync from Client Backup Sync from Server Restore 2 S! Addressbook BkUp YES Operation/Description Send data changed in 940P Phone Book to S! Addressbook Delete all S! Addressbook entries and save 940P Phone Book to S! Addressbook Send data changed in S! Addressbook to 940P Phone Book Delete all 940P Phone Book entri
Account Details Save phone number, mail address, street address, etc. in Account Details. 4 Editing Account Details Phone Book 1 2 3 [Edit] Enter Phone Password Edit [Finish] Your subscribing phone number cannot be edited or deleted. Account Details Functions In Account Details, press Item Edit* Character size Display all data* Copy names Copy phone numbers 4-12 [Menu] for following operations.
Voice Dial Searching Entries by Voice Dial Make a call by saying a voice dial name. 1 Note 2 3 Say a Voice Dial name Say the name within four seconds after voice recognition tone sounds. Once Voice Dial is recognized, result appears. [Detail] to show phone number Voice Calls Highlight phone number 4 Phone Book Keep microphone about 10 cm away from your mouth, and pronounce a Voice Dial name clearly. If microphone is too distant, your voice may not be recognized.
4 Phone Book 4-14
Digital TV Basics .................................................................... 5-2 Initial Setup .......................................................... 5-4 Channel Settings ........................................................................5-4 Watching TV .......................................................... 5-5 5 Indicators ...................................................................................5-6 Program List (Japanese) .................................................
Basics Mobile W-Speed 940P supports One Seg terrestrial digital TV broadcasting. Operation descriptions are based on Portrait View. One Seg 5 Digital TV One Seg is a digital TV broadcasting service for mobile phones. For more information, visit The Association for Promotion of Digital Broadcasting Website: [PC] http://www.dpa.or.jp/ [Handset] http://www.dpa.or.jp/1seg/k/ (Japanese only) Frame rate of Digital TV images are automatically enhanced. Enjoy smooth image flow ( P.18-14).
Signal Reception Areas Incoming Transmissions TV signal reception may be poor in the following conditions: Too far from or close to broadcasting stations. Mountain areas or near tall buildings. In moving vehicles, underground, in tunnels, etc. Near high-voltage wires, neon lights, wireless base stations, railroad tracks or highways. Areas with numerous signal obstructions or areas where signal reception is blocked. TV pauses for incoming calls. Resume TV after call ends.
Using Channel List Initial Setup Set channels for your area. From Up to ten Channel Lists can be saved. Set channels after extending TV Antenna. 5 Main Menu Digital TV 1 2 TV Select a region Channel Setting Select Area Select a prefecture Note If manual setup fails, try automatic channel setup ( Below). 940P detects a change in reception area after moving to a different area. Set Channel List for that area.
Watching TV Set channels beforehand ( 1 Note Alternatively, Main Menu TV Watch TV Rotate handset while viewing TV to switch Portrait/Landscape View. While Motion Control Setting ( P.18-6) is OFF , press to switch Portrait/Landscape View. P.5-4). Viewer appears. 5 Tip for Wireless Playback ( P.10-10) P.
Indicators Screenshots are provided for reference only. Actual handset windows differ in appearance. 5 ❶ Digital TV ❷ Item ⓫ ⓬ ❶ Image ● ❷ Captions ● ❸ Data Broadcast ● ⓭ ❹ Data Broadcast ● Mode ❺ Off timer ● ❻ ECO Mode ● ❼ Channel ● TBD ❸ ❹ ❽ Signal Strength ● ❺❻❼ ❽ ❾❿ Strong←――→Weak Out of range Level ● Receiving Captions – ❾ ❿ Volume ● – ⓫ ⓫ ● Program Title ⓬ Recorder Status 1 ⓬ ● ⓭ Display/Caption 2 ⓮ ● ❶ Description – – ( P.5-7) Data Broadcast Mode off Data Broadcast Mode on ( P.
Program List (Japanese) Functions while Viewing TV Check program schedules and set timer to view/record TV programs. Main Menu TV Program List ■ View Program List while TV is Active [EPG] > ■ Show Program Information while TV is Active [EPG] To return to Viewer, > Press and hold Data Broadcast (Japanese) Access a variety of program-related information such as still images and videos. Data Broadcast is not available in Landscape View. 1 Activate TV (Data Broadcast Mode off) [TV/data] appears.
■ Other Functions > While TV is active, follow the steps below. 5 Digital TV 5-8 Item Operation/Description Access > Press and hold To return to viewer: While Yahoo! Keitai is active, press Internet via and hold Yahoo! Keitai Access Open Menu Yahoo! > PC Site Browser Internet via Follow onscreen instructions PC Site Browser Make a Voice > Stand-by display Enter a number (For Video Call, [V. Call]) Call/Video Interrupt TV during call. After call, TV resumes. Call Recording will not be interrupted.
Item Settings Key guide 1 2 Operation/Description > Select an item Switch display 1: Switch ・ Display/operation view (switch image size/image off) Switch TV/data BC 1: ・ Display/operation Toggle Data Broadcast Mode on/off ( P.5-7) Icons 2: Set Indicator ・ Display/operation Display in Landscape View AV output : View a Digital ・ Display/operation TV image on a TV set or other devices ( P.
TV Links (Japanese) Functions Available in TV Link List Saving TV Links Main Menu Following function is not available in Landscape View. 5 Digital TV 1 2 Switch Data Broadcast Mode on Select a link YES Follow onscreen instructions to save link. Opening TV Links Main Menu 1 5-10 TV TV Link Select a TV Link Confirmation appears when Internet access is required. Select YES to proceed. If TV Link is expired, confirmation appears asking whether to delete link.
Recording/Playing Programs Recording Current Program Capturing Screenshots Captured screenshots are saved to handset. This feature is unavailable when signal strength is Mode is on. Save programs as videos or still images. Recordings are saved to microSD Card. Recording Time (total)* Approx. 640 minutes Savable Files 99 files * Average recordable time per 2GB of data Recording is unavailable when signal strength drops to 1 2 Activate TV .
Playing Recorded Programs Main Menu 1 5 Data Folder TV Toggle Playback Speed Video Select a video View Title Digital TV Playback starts. When a playback position is recorded to video, playback starts from the position. [FromTop] to paly back from Press beginning. When selecting a video containing divided videos, select a video to play back from divided video list.
Main Menu 1 Data Folder TV Image Select an image Timer Set up to 100 timer entries to watch or record programs.
5 Digital TV Note Select timer entries to check details; [Edit] to edit details. Timer Recording does not start if Internet and two other functions are active simultaneously. Alarm does not sound for Timer Watching/Timer Recording in following functions. For Timer Recording, complete followings (in parentheses) one minute before timer starts; otherwise, recording does not start.
Camera Before Using Camera ............................................ 6-2 Image File Formats .....................................................................6-2 Notes .........................................................................................6-3 Inside & Outside Camera ............................................................6-3 Camera Display Indicators...........................................................6-4 6 Pictures/Videos .................................................
Before Using Camera 6 940P features approximately 8.1 Mega Pixel CMOS Auto-focus Camera capable of capturing still images and videos. Use Album-Touch ( P.6-15) to view or search still images captured by touch controls. Use a variety of effects to view slide show.
Notes Use Inside or Outside Camera. Flash/Photo Light is available. Inside Camera Outside Camera 6 Camera Remove dust/debris from lens cover with a soft cloth. Handset movement may blur images especially in dark places; hold handset firmly. Capturing/saving images immediately after handset has been left in a hot place may affect image quality. Exposing lens to direct sunlight may affect image quality. While Camera is active, Photo light illuminates/flashes.
Camera Display Indicators Images shown below are for reference only.
Item P.6-10) Operation Press and hold [ ] Select a mode ( For Scene/My original set., select an item) [Video/Cont./Camera] Toggle Action mode ( P.6-11) — ( P.6-11) 6 — — — Camera Description Intelligent Auto Normal Scene My original set. For Scene/My original set., indicators may vary depending on setting. ❷ CHG Camera-mode Camera mode Video Camera mode / / Action mode (Auto/ Auto bracket/Manual) (Cont. shooting set.: P.6-8) ❸ Storage setting Phone microSD Card ❹ No.
Pictures/Videos 4 Confirm battery strength ( P.1-11) and memory ( P.6-11) before recording. When battery is low, video cannot be recorded. Captured images and videos are automatically saved to Data Folder. To select save location each time, turn Auto save set to OFF ( P.6-11). Operation descriptions are based on Portrait View operations. 6 Camera Note When using Inside Camera, mirror image appears on Viewfinder. Captured images appear correctly. , press firmly.
Recording Videos (Video Camera Mode) Press and hold Video Viewfinder appears. 2 Frame subject 3 [Record], start recording From To toggle Inside/Outside Camera: or to Tone sounds and appears. When Focus is set to Face Detection or Auto , Outside Camera automatically focuses on subject before recording begins. During recording, auto focus functions regardless of Focus setting. 4 5 [Stop], or TBD Video Viewfinder to end recording Tone sounds. Video is automatically saved.
6 Camera ■ Zoom [Record], (zoom in) or (zoom out) to adjust zoom > or For continuous zoom: Press and hold or rotate Speed Selector for continuous zoom. Press and hold Zoom is available during video recording. Zoom is disabled when Image size is set as follows: ・Inside Camera: VGA, HVGA Wide or QVGA (individual mode) Zoom may change image quality. Maximum zoom levels for individual image size are as follows.. Camera mode Outside Camera Camera (High sensitiv.: OFF) Camera (High sensitiv.
■ Use Flash/Photo Light Select a Flash/Photo Light setting for Outside Camera. [Menu] Flash setting > In Picture Viewfinder, (See below) Select an item Operation/Description Flash goes off automatically in low-light situations. Flash always goes off when capturing images. Photo Light illuminates. Flash/Photo Light is disabled. [Menu] Photo light set. >In Continuous Shooting/Video Viewfinder, ON or OFF Flash/Photo light is not available when battery is low.
■ Change Continuous Shooting Settings > [Menu] Cont. shooting set.
Focus Functions (Outside Camera) Changing Focus Settings Camera mode/Video camera mode: Face Detection Action mode: Auto Face Detection (Camera mode/Video camera mode only): For portraits Auto: Auto detection Close-up: For nearby objects Landscape: For distant landscapes AF tracking (Camera mode only): Tracks subject automatically 1 2 In Picture/Video Viewfinder, to select a setting Note When Photo mode is set to Intelligent Auto , toggle current focus .
Viewing Saved Images Auto Focus Lock Bring focus on subject at center of display automatically. Lock focus on subject, and recompose your picture. 1 6 In Picture/Video Viewfinder, halfway , or Main Menu 1 Camera 2 3 Determine composition Capture image in selected camera mode (Camera mode: P.6-6/Action mode: P.6-7/Video camera mode: P.6-8) In Step 1, press firmly to shoot. halfway to lock focus, then press Open Pictures Pictures Open Videos ① When in focus, handset sounds.
6 Camera TBD 6-13
6 Camera TBD 6-14
6 Camera TBD 6-15
6 Camera TBD 6-16
6 Camera TBD 6-17
6 Camera TBD 6-18