User's Manual

Introduction
14

List of materials used
Where it is used Material/Finishing
Outer casing Display surface Polycarbonate + glass fiber/UV coating
Dot illum. surface Polycarbonate/UV coating
Operation key
surface,
Battery surface,
Back cover
ABS resin/UV coating
Connector terminal Stainless steel/nickel plating + tin plating
Connector terminal cover Polycarbonate + elastomer resin/
UV coating
Camera panel Polycarbonate/
tin vapor deposition + UV coating
Camera ring area Acrylic urethane
Camera lens area Acrylic resin/surface hard coating
Command navigation key Polycarbonate/UV coating
Metal part of the command
navigation key
Polycarbonate/
aluminum vapor deposition + UV coating
Side
▲
key, Side
▼
key ABS resin/UV coating
Shutter key Polycarbonate/
aluminum vapor deposition + UV coating
Charging terminal Phosphor bronze/
nickel plating + gold plating
Operation key
surface
Key area Polycarbonate
Sheet area PET resin
Open/close stopper Acrylic urethane
Hinge side cap
Display panel Acrylic resin/surface hard coating
Display surface horizontal open
stopper
Acrylic urethane
Display surface horizontal open
hinge guide area
Elastomer resin
Battery compartment surface Polycarbonate
Battery
terminal
Resin part PPS resin
Terminal area Beryllium copper/
nickel plating + gold plating
Where it is used Material/Finishing
Battery pack Resin area Polycarbonate
Label PET resin
Terminal area Glass epoxy substrate/
nickel plating + gold plating
Screw (Battery compartment) Steel/nickel plating
Hinge area Polyamide + glass fiber/UV coating
Hinge area (center) ABS resin/UV coating
Hinge area (horizontal open side) PET resin
Flash/Photo light area Polycarbonate
Hinge area for Horizontal Open
Style
ABS resin/UV coating
Metal part of hinge area for
Horizontal Open Style
Polycarbonate/
tin vapor deposition + UV coating
Hook for Horizontal Open Style Stainless steel/
nickel plating + chrome plating
Upper area of roller for Horizontal
Open Style
Polycarbonate + ABS resin/UV coating
Roller area for Horizontal Open
Style
Recording key Polycarbonate/UV coating
One-push open button Polycarbonate
Metal part of the one-push open
button
Aluminum/alumite treatment
microSD card
slot (Battery
compartment)
Resin part LCP resin
Metal part Stainless steel/nickel plating