User's Manual

Basic Operation
32
■
Changing the Display Brightness
You can set Backlight to OFF. Then the display dims,
and the keys turn off. You can also set the time that
is to elapse before operation switches to the Power
Save Mode.
Operation switches to the Power Saver Mode when
the time set using time to power saver has elapsed
without the FOMA terminal being operated. Power
Saver Mode clears away images on the display,
suppressing power consumption of the battery.
Power Saver Mode
Press and hold
-8
for
at least one second from
the Stand-by display.
“ ” appears on the
Stand-by display.
To release
Perform the same operation.
1
■
Making Display Hard to Be Seen by
the People Around
■
Selecting a Pattern of the Main Menu
Display
+m
from the Stand-by display
▶
+l
(
)
+m+
1
Select a pattern.
Select a pattern.
2
+m
from the Stand-by display
▶
Set./Service
▶
Display
▶
Backlight
+m+
1
Select “Lighting”
▶
Select “OFF”.
Select “Lighting”
2
Enter a time for switching to the Power
Saver Mode (time to power saver: in
seconds).
Enter a time for switching to the Power
Saver Mode (time to power saver: in
3
You can set “View blind” to make it harder for the
people around you to see the display from oblique
angles.