User's Manual

81
More Convenient
■
Sending Data
Function menu of the data to be sent
▶
Select “Send Ir data” or “
transmission”.
⿠
Procedure for sending data might differ depending
on the data.
Function menu of the data to be sent
1
Select “YES”.
Select “YES”.
2
■
Receiving Data by Infrared Communication
+m
from the Stand-by display
▶
LifeKit
▶
Receive Ir data
▶
Receive
+m+
1
Select “YES”.
Select “YES”.
2
⿠
For infrared communications, set the receiving end terminal
fi rst, and then start sending data within 30 seconds.
■
Receiving Data by iC Communication
Face the
f
mark of the receiving end
terminal which shows the Stand-by
display, to the
f
mark of the sending
end terminal.
Face the
terminal which shows the Stand-by
1
Select “YES”.
Select “YES”.
2
Connect to Personal Computer
You can connect the FOMA terminal to a personal
computer to transfer WMA fi les, images or other data
stored on microSD card.
You can also connect to the internet and transfer the
data.
⿠
You will need the FOMA USB Cable with Charge
Function 01/02 (option) or FOMA USB Cable (option).
⿠
To perform data communication, you will need to install
the “FOMA communication confi guration fi le” (driver) on
the CD-ROM provided.
For details, refer to the “Manual for PC Connection” on
the CD-ROM provided.