Panasonic Submittal

Specification Submittal Data / Panasonic Ventilation Fan
Description
Ventilating fan shall be low noise ceiling mount
type rated for continuous run. Fan shall be
certified by the Home Ventilating Institute (HVI).
Heating elements shall be included. Evaluated
by Underwriters Laboratories and conform
to both UL and cUL safety standards. Fan is
not intended for installation over a tub/shower
enclosure.
Motor/Blower:
• Four–pole totally enclosed condenser motor
rated for continuous run.
• Power rating shall be 120 volts and
60 Hz.
• Motor equipped with thermal–cutoff fuse.
• Permanently lubricated plug–in motor.
Housing:
• Rust proof paint, galvanized steel body.
• 4" diameter duct adapter.
• Built-in backdraft damper.
Grille:
• Attractive design using ABS material.
• Attaches directly to housing with torsion
springs.
Heater:
• Tubular steel sheathed heating element.
Nichrome wire with magnesium oxide for
optimal heat transfer and electrical insulation
at elevated temperatures.
• 90 CFM super quiet, energy efcient blower
motor.
• Quick 1-minute warm-up.
Warranty:
• 3-Year limited warranty.
Architectural Specifications:
Ventilation fan and heat combination shall be
ceiling mount, with no less than 110 CFM and
no more than 0.6 sone as certied by the HVI
at .1 static pressure in inches water gauge
(w.g.) with no less than 89 CFM and no more
than 1.1 sones at .25 w.g. Power Consumption
shall be no greater than 30.7 Watts at .1 wg
and 30.5 Watts at .25 w.g. With efciency of
no less than 3.6 CFM/Watt at .1 w.g. and 2.9
CFM/Watt at .25 w.g. The motor shall be totally
enclosed, 4 pole condenser type engineered
to run continuously. Power rating shall be
120v/60Hz. Duct diameter shall be no less than
4". Fan is not intended for installation over a tub/
shower enclosure. Fan shall be ASHRAE 62.2,
LEED, EarthCraft, California Title-24, and WA
Ventilation Code compliant. Heating element
shall be a Nichrome wire in a tubular steel
sheath construction with magnesium oxide for
optimal heat transfer. Heating element power
consumption shall be no less than 1400 watts.
Heating feature shall include a 90CFM blower
fan with energy efficient condenser type motor
with quick 1-minute warm-up.
FV-11VH2
Panasonic Home and Environment Company
Division of Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
www.panasonic.com/building
For complete Installation Instructions visit www.panasonic.com/building
Model Quantity Comments Project:
Location:
Architect:
Engineer:
Contractor:
Submitted by:
Date:
VF11144SS
Specications: WhisperWarm FV-11VH2
Static Pressure in inches w.g.
0.1 0.25
Air Volume (CFM)
110 89
Noise (sones)
0.6 1.1
Power Consumption (watts)
30.7 30.5
Energy Efficiency (CFM/Watt)
3.6 2.9
Speed (RPM)
778 935
Heating Element (Watts) 1400
Blower Fan (CFM) 90
Blower Fan (Watts) 25
Fan/Heater (Amps) 12.2
FV-11VH2