User's Manual Part 1

Chapter 2

Getting Started 13

Standby Display

The standby display appears when your phone is on and in an “idle” state.

You can return to the standby display at any time (except during a call) by

pressing . The backlight turns on automatically for 15 seconds when

you power up the phone or when you press any key.

For instructions on changing your standby display to a picture, see

“Standby Screen” on page 49

. (If you have selected a standby picture, it

will not be displayed unless you are in your home service area.)

Note:

The backlight remains on when the phone is plugged into

a DC adapter.

Moving through the Menu

You access the Main Menu from the standby display:

is displayed on the bottom left side of the display. To access the

Main Menu, press the corresponding softkey ( ) on the keypad just

below where

is displayed. After entering the Main Menu, press

either softkey ( or ) to select the options displayed above them.

Within the menu, the selected feature or function is indicated by an arrow

( ). Use the navigation key scroll areas

as described in the table on

page

When an option is selected using the softkeys, the display changes to offer

another level of softkey options. This process continues until you have

responded to all display prompts and options for a particular softkey.

Shortcut Keys

You can quickly access many of the phone’s features by pressing shortcut

keys instead of scrolling through the numbered options on the display. For

a complete list of the shortcut keys, refer to the Menu Map on the inside of

the front cover. For example, you can select Key Volume by pressing

(MENU), then press (Tone Settings) and (Key Volume).

Setting Date and Time

The standby display shows the current date and time, as well as the day of

the week. You can adjust these settings if necessary.

Adjusting Date and Time Settings

From standby, press (MENU) to enter the Main Menu.

Scroll to

Phone Settings

. Press (OK).

Scroll to

Time Settings

. Press (OK).