User's Manual Part 4

Chapter 6
Additional Operations 39
• The display indicates the current key volume
setting.
• If you select the lowest setting, the key volume is
muted (silent); however, DTMF tones are still being
sent.
4
Press and hold to increase key volume. Press and hold to
decrease key volume.
5
When an acceptable volume is reached, press (OK) to select.
Ring Alert
See
“Selecting a Ring Alert” on page 13
for information on how to set your
ring alert.
Message Alert
For your message alert you can choose
General Rings
or
Melody
and
then select from six general rings or five melodies.
Selecting a Message Alert
1
From standby, press (MENU) to enter the Main Menu.
2
Scroll to
Tone Settings
and press (OK).
3
Scroll to
Message Alert
and press (OK).
4
Scroll to the message alert type you want to select and press (OK).
• If you select
General Rings
, you can choose from six different rings. As
you scroll through the rings, you can hear the ring associated with each
ring number. When you hear the ring you want for your message alert,
press (OK).
• If you select
Melody
, you can choose from five melodies. As you scroll
through the list, the melodies are played. When you hear the melody you
want for your message alert, press (OK).
Note:
When selecting a new message alert type, you cannot
hear the sample alert if ring volume is muted (silent).
Vibration
See
“Vibration Alert” on page 13
for information on how to set your ring
alert to vibration.
Warning Tone
A warning tone is emitted when the battery charge is low, when attempting
to automatically redial a number, and when powering on the phone. The
Warning Tone
setting allows you to turn some warning tones on and off.
You cannot disable or adjust the low battery warning tone.The low battery
warning tone sounds even if you are using the phone.
1
From standby, press (MENU) to enter the Main Menu.
2
Scroll to
Tone Settings
and press (OK).