User's Manual
121
4. To complete multimedia messages, see page 42; or e-mail messages on page 44;
or Bluetooth on page 83; or Infrared on page 85.
PHOTOLIGHT
Light up your subject before snapping a picture or recording
a video clip. To turn on the PhotoLight,
1. From standby mode, press and hold .
2. Open Camera and continue with Take a Picture on
page 58. To record a video clip, continue with Record a
Video Clip on page 71.
To switch off PhotoLight, return to standby mode, then press
and hold .
Or, you can switch on or off PhotoLight from Tools
application:
1. Open PhotoLight.
Unlike a camera flash, the PhotoLight does not flash. PhotoLight remains on until you
switch it off.
Use PhotoLight as a Flashlight
The PhotoLight can be switched on to use as a small flashlight.
1. In standby mode, press and hold . The PhotoLight switches on.
To switch off the PhotoLight, return to standby mode, then press and hold .
• Whether or not you close the flip, the PhotoLight remains on until you switch it off.
• The PhotoLight also switches off when the phone is switched off.
Note: The phone may not allow you to copy, modify, transfer or forward
some copyrighted images, ringtones or other content.
Send is not available if a folder or playlist is highlighted.
Note: Do not use the PhotoLight near the eyes. The PhotoLight is
intended as an auxiliary light source for shooting photos in dim
areas. It does not produce the intense light of a typical camera flash.
Battery note: Keeping PhotoLight switched on consumes battery power more
rapidly. To conserve battery power, switch off PhotoLight when not in
use.
PhotoLight
X800ChinaOI.bookPage121Tuesday,November16,200411:25AM