User's Manual
114
Connect
Connect
When you set up your Internet account for the first time, select X70 as the connecting
modem device. For more details contact your ISP or for help on using Windows Dial Up
Networking, search your Windows Help Files, Start > Help.
Testing the infrared connection
The following describes how to set up a PC to connect to your X70, using the Windows
standard communication software, HyperTerminal, as an example. The procedure
described may differ for other software packages.
On your PC, select Start > Programs > Accessories > Communications >
HyperTerminal.
In the Connection Description dialogue box, enter a name of your choice in the Name
field and click OK.
In the Phone Number dialogue box, select the country code
Enter your Internet Service Provider’s phone number and confirm that X70 is
selected in the “Connect using” box.
Click OK.
When the connect dialogue box is displayed, click Cancel.
Select File > Properties and confirm that X70 is selected.
Click OK.
In the HyperTerminal window, type AT+CGMI and click.
If the X70 has connected successfully, you will receive the reply OK.
Connecting to the Internet
To connect to the Internet, you need to type in the AT command in the terminal screen on
your PC.
On the PC:
Display the terminal screen in the communication software on your PC. In our example,
select Start > Programs > Accessories > Communications > HyperTerminal.
On the X70:
Select Connect > Infrared Dialup.
When Ready for Communication is displayed, type in the AT command in the
terminal screen of your PC.
Enter the phone number to connect to for Circuit Switch. Use the dedicated phone
number to packet, for Packet connection.
Enter AT commands as necessary.
Note: HyperTerminal may not be located in Communications on your PC.
Menu > Connect > Infrared Dialup
X70DPK11B1.book Page 114 Thursday, September 18, 2003 5:12 PM