User's Manual Part 1
31
Basics
Hold
You can put a call on hold.
During a call:
1. [q] to switch between Hold Call and Resume
OR
[5] (Options) 7 Select Hold Call or Resume
Handsfree talking
You can have a conversation without holding the phone to your
ear.
Swapping between Speaker and Handheld mode
1. [5] (Options) 7 Select Speaker mode or Handheld
mode
Volume control
You can adjust the volume of the phone earpiece, speaker or
headset if attached.
To increase the volume:
1. [1]9[O]
To decrease the volume:
1. [2]9[P]
DTMF
DTMF (Dual Tone Multi Frequency) can be sent during a
conversation. These are often used to access voicemail, paging
and computerised home banking. For example, you may need to
enter a number to remotely access voicemail messages. A phone
number may be stored in the Contacts card together with a DTMF
sequence, allowing the number to be dialled upon recall and the
DTMF sequence to be sent automatically.
To send DTMF during a call:
1. Enter digits [L]-[K], [e] or [r]
Pause dial
Using pauses allows you to send DTMF automatically.
1. Enter the phone number
2. Press and hold [r] until a “p” is displayed
3. Enter the DTMF digits after the pause, e.g. enter the
number to access voicemail messages
4. [q]9[0]
When the call is connected, the DTMF sequence is sent
after 3 seconds.
VS3VFAAA.bookPage31Monday,May23,200511:25AM