Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
fd
L
15 min. 4 min.
19 min.
fD
F
+
–
fd
L
15 min. 4 min.
19 min.
fD
F
+
–
Lot. No.
Polarity marking (−)
Series
R. Capacitance
R. Voltage
Radial Lead Type
Series : SEPC
●
Super low ESR (5 mΩ to 24 mΩ)
●
Large capacitance (2700 F max.)
●
RoHS compliance, Halogen free
Speci cations
Features
Size code B9 C55 C6 C9 E7 E9 E12 E13 F13
Category temperature range –55 °C to +105 °C
Rated voltage range (V.DC) 2.5 6.3 2.5 to 16 6.3 to 16 2.5 to 16 16 2.5 to 6.3 2.5 to 16
Rated capacitance range (F) 100 to 560 220 100 to 560 100 to 820 150 to 1000 180 to 1000 180 to 270 470 to 820 470 to 2700
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
+105 °C, 5000 h, rated voltage applied
Capacitance change Within ±20 % of the initial value
tan
d
< 150 % of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change Within ±20 % of the initial value
tan
d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Unit : mm
✽
1 2SEPC390M, 2SEPC560M : 0.5±0.05
✽
2 16SEPC150MD, 10SEPC270M : 0.45±0.05
B9, C55, C6, C9, E7, E9 size flat rubber is used.
B9, C55, C6, C9, E7, E9 Size
E12, E13, F13 Size
Size code
fD±0.5
L max. F ±0.5
fd±0.05
B9
5.0 9.0 2.0 0.6
C55
6.3 5.5 2.5 0.45
C6
6.3 6.0 2.5 0.45
✽1
C9
6.3 9.0 2.5 0.6
E7
8.0 7.0 3.5 0.6
✽2
E9
8.0 9.0 3.5 0.6
E12
8.0 12.0 3.5 0.6
E13
8.0 13.0 3.5 0.6
F13
10.0 13.0 5.0 0.6
Dimensions (not to scale)
✽
Externals of fi gure are the reference.
Nov. 201501