Router User Manual

Nortel Secure Router 8000 Series
Troubleshooting - VAS 1 AAA troubleshooting
Issue 01.01 (30 March 2009) Nortel Networks Inc. 1-21
Value Attributes Field format Usage
15 Login-Service Integer Indicates the logon user type, such as
Telnet, Rlogin, TCP Cear, PortMaster
(proprietary), and LAT.
18 Reply-Message String (1 to
128)
z
In the authentication acceptance
packet, this indicates successful
authentication.
z
In the authentication rejection
packet, this indicates the failed
authentication.
25 Class String A RADIUS server sends the
authentication acceptance packet
together with the class attributes to a
NAS. The NAS then sends back the
class attributes together with
accounting request packets. On the
standard RADIUS server, the class
attributes also contain the Committed
Access Rate (CAR).
27 Session-TimeOut Integer The timeout period of the user, in
seconds. In the Extensible
Authentication Protocol (EAP)
challenge packets, this indicates the
reauthenticated time for the user.
28 Idle-TimeOut Integer The idle timeout period, in seconds.
31 Calling-Station-Id String Indicates the MAC address.
32 NAS-Identifier String If the NAS ID is configured, the NAS
identifier should be the NAS ID.
Otherwise, the NAS identifier can be
the host name.
40 Acct-Status-Type Integer Indicates the type of accounting
request packets.
z
1 indicates the accounting start
packet.
z
2 indicates the accounting stop
packet.
z
3 indicates the hot billing packet.
z
4 indicates the accounting packet
resetting.
41 Acct-Delay-Time Integer Indicates the time taken to send
accounting packets, in seconds. The
network transmission time is excluded.
42 Acct-Input-Octets Integer Indicates the number of received bytes,
in bytes, Kbytes, Mbytes, or Gbytes.