Specifications

-4-
Confidential
1.GENERAL
・ These specifications describe the preliminary specifications of “Receiver Board Module for DECT Microphone
System” for Audio Enhancement (AE).
2.FEATURES
・ Receiver Board Module has same features and outside interface as DECT Receiver （K-SRC14）.
・ System specifications and system functions including microphones are same as "DECT Microphone System"
with Receiver, so refer to “DECT Microphone System for Audio Enhancement Specifications”, with replace
"Receiver" to "Receiver board module.
3.SPECIFICATIONS
3.1.Product Specifications
GENERAL
Combined AE’s product : BEAM, XDSolo
Power : 24VDC (minimum 21.6VDC~maximum 26.4VDC)
input from AE’s product (BEAM or XDSolo)
Input current : 130mA
Dimensions : 150mm(W)x 114mm(H）x 18mm(D)
Weight : 85g
Temperature Range : 0 °C ~ +50°C (around Receiver Board Module)
Humidity Range : ~ 90%
The Condition of Installation : Indoor, Fixed Installation
Mounting direction : Only vertical direction with antenna facing upward
LINE Inputs
The number of connectors : 1 Stereo input (Tip:Left, Ring:Right, Sleeve:GND)
1/8" (3.5 mm) Stereo phone Jack
Internal Bus : Mono Mixing
Input Level : -10dBV Unbalanced
Input Impedance : 10kΩ or more
OUTPUT
The number of connectors : 1 Mono output (Mix output Unbalanced)
1/8" (3.5 mm) Stereo phone Jack
Adapted Load Impedance : 10kΩ or more
Nominal Output Level : -10dBV
Residual Noise : -60dBV or less