User's Manual

Table Of Contents

FCC ID :ACJ9TGWL22B

WLAN+BT module adapter

Model number: WL22B

User Manual

GENERAL

This device is a 2x2 Wi-Fi+Bluetooth® adapter.

Integration to the end product

1. WL22B module is mounted on the main board.

2. Insert Antenna unit into Antenna connectors of the WL22B module.

Technical Specification

a) Dimensions (W x L x H): 22mm x 30mm x 2.4mm

b) Weight: 2.83g

c) IEEE WLAN Standard: IEEE802.11a/b/g/n/ac/ax

d) Bluetooth: BDR, EDR, Low energy

e) Operating Temperature: -10 to 50 degree Celsius

f) Humidity: 30 to 80 %RH

g) Host interface: M.2: CNVio2

PAGE 1
FCC ID :ACJ9TGWL22B WLAN+BT module adapter Model number: WL22B User Manual GENERAL This device is a 2x2 Wi-Fi+Bluetooth® adapter. Integration to the end product 1. WL22B module is mounted on the main board. 2. Insert Antenna unit into Antenna connectors of the WL22B module. Technical Specification a) b) c) d) e) f) g) Dimensions (W x L x H): Weight: IEEE WLAN Standard: Bluetooth: Operating Temperature: Humidity: Host interface: 22mm x 30mm x 2.4mm 2.83g IEEE802.
PAGE 2
FCC ID :ACJ9TGWL22B Regulatory Information Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 14mm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.