A-47 Network Mini Dome Camera Quick Operation Guide
A-47 Mini Dome Camera • Quick Operation Guide Thank you for purchasing the Advidia A-47 mini dome camera. If there are any questions, or requests, please do not hesitate to contact the dealer. About This Document This manual applies to the following models. Model A-47 This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual.
A-47 Mini Dome Camera • Quick Operation Guide Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
A-47 Mini Dome Camera • Quick Operation Guide 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
A-47 Mini Dome Camera • Quick Operation Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected. Warnings Follow these safeguards to prevent serious injury or death.
A-47 Mini Dome Camera • Quick Operation Guide specifications for detailed information. ● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed. ● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.
A-47 Mini Dome Camera • Quick Operation Guide sensor will not be exposed to the laser beam. ● Do not place the camera in extremely hot, cold (the operating temperature shall be-30℃~+60℃,or -40°C ~ 60°C if the camera model has an “H” in its suffix), dusty or damp locations, and do not expose it to high electromagnetic radiation. ● To avoid heat accumulation, good ventilation is required for operating environment. ● Keep the camera away from liquid while in use.
A-47 Mini Dome Camera • Quick Operation Guide Table of Contents 1 Appearance Description ................................................................. 8 2 Installation .................................................................................... 10 2.1 Ceiling Mounting ........................................................... 11 2.2 Ceiling Mounting with a Gang Box ................................ 15 2.3 Pendant Mount Installation ......................................... 177 2.
A-47 Mini Dome Camera • Quick Operation Guide 1 Appearance Description 1 6 2 3 4 7 8 Figure 1-1 Overview (1) 8
A-47 Mini Dome Camera • Quick Operation Guide Figure 1-2 Overview (2) Table 1-1 Physical Description No.
A-47 Mini Dome Camera • Quick Operation Guide 2 Installation Before you start: Make sure the device in the package is in good condition and all the assembly parts are included. Make sure all the related equipment is powered off during the installation. Check the specification of the products for the installation environment. Make sure the power supply matches with your required voltage to avoid damage.
A-47 Mini Dome Camera • Quick Operation Guide the lens causing reflection. ● The foam ring around the lens must be seated flush against the inner surface of the bubble to isolate the lens from the IR LEDS. Fasten the dome cover to camera body so that the foam ring and the dome cover are attached seamlessly. 2.1 Ceiling Mounting Steps: 1. Use the supplied drill template as a guide when drilling holes for the screws and cable.
A-47 Mini Dome Camera • Quick Operation Guide 2. Use the supplied Allen wrench to loosen the screws on the camera’s housing to remove. Figure 2-2 Disassemble the Camera 3. Attach the adapter plate to the ceiling with the supplied screws.
A-47 Mini Dome Camera • Quick Operation Guide 4. Attach the camera housing with the supplied screws. Figure 2-4 Attach the camera body 5. Connect the power cable (if not using PoE), and network cable, Use pliers to remove the removable tab and route the cables via side outlet (as shown in Figure 2-3) if no cable hole is drilled in step 1, and connect the corresponding cables.
A-47 Mini Dome Camera • Quick Operation Guide 6. View the image via the web browser. 7. Slightly loosen the hex screw beside the RESET button to adjust the surveillance angle. 8. Use the supplied adjusting tool to adjust the pan [±30°], tilt [0~80°], and rotation direction [0~360°]. Pan Adjusting Tool Rotation Tilt Figure 2-6 3-Axis Adjustment 9. Tighten the hex screw after final adjustments have been made. 10. Place the camera housing over the camera body and tighten the set screws on the front cover.
A-47 Mini Dome Camera • Quick Operation Guide Figure 2-7 Install the Front Cover 11. Remove the protective film carefully to complete the installation. Do not remove the protective film until the installation is complete. To avoid fingerprints, do not touch the inside dome of the housing with your hands. 2.2 Ceiling Mounting with a Gang Box Steps: 1. Attach the adapter plate to the gang box with the supplied PM4X8 screws.
A-47 Mini Dome Camera • Quick Operation Guide Figure 2-8 Attach the Adapter Plate 2. Attach the camera body to the adapter plate with the supplied PM4X8 screws. Figure 2-9 Attach camera body 3. Connect the power cable (if not using PoE), and network cable. 4.
A-47 Mini Dome Camera • Quick Operation Guide set screws on the front cover. Figure 2-10 Install the Front Cover 5. Tear off the protective film carefully to complete the installation. Do not remove the protective film until the installation is complete. To avoid fingerprints, do not touch the inside dome of the housing with your hands. 2.3 Pendant Bracket Installation Steps: 1. Install the bracket to the ceiling with the supplied screws in the ceiling bracket package.
A-47 Mini Dome Camera • Quick Operation Guide The optional pendant mount for the A-47 is the A-46-PM 2. Attach the adapter plate to the ceiling bracket with the supplied PM4X8 screws. Figure 2-11 Attach the Adapter Plate 3. Attach the camera body to the adapter plate.
A-47 Mini Dome Camera • Quick Operation Guide Figure 2-12 Attach camera body 4. Place the camera housing over the camera body and tighten the set screws to complete the installation.
A-47 Mini Dome Camera • Quick Operation Guide Figure 2-13 Install the Front Cover 5. Remove the protective film carefully to complete the installation. Do not remove the protective film until the installation is complete. To avoid fingerprints, do not touch the inside dome of the housing with your hands. 2.4 Wall Bracket Installation Steps: 1. Install the wall bracket to the wall with the supplied screws in the wall bracket package.
A-47 Mini Dome Camera • Quick Operation Guide 2. Fix the adapter plate to the wall bracket. Figure 2-15 Attach the Adapter Plate 3. Attach the camera body to the wall bracket with the supplied screws. Figure 2-16 Install the Camera 4. Place the housing over the camera body and tighten the set screws to complete the installation.
A-47 Mini Dome Camera • Quick Operation Guide Figure 2-17 Install the camera housing 5. Remove the protective film carefully to complete the installation. Do not remove the protective film until the installation is complete. To avoid fingerprints, do not touch the inside dome of the housing with your hands. 2.5 Install the Micro SD Card The A-47 supports local storage; please refer to the following steps to install the micro SD card. Steps: 1. Remove the housing by loosening the set screws on it.
A-47 Mini Dome Camera • Quick Operation Guide Figure 2-18 Remove the housing 2. Insert the micro SD card to the card slot until you hear a click. 3. To Remove the SD card, push it back in slightly so it will eject.
A-47 Mini Dome Camera • Quick Operation Guide 3 Setting the Network Camera over the LAN Purpose: To view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the same subnet with your PC. Then, install the Advidia Camera finder utility to find and change the IP of network camera. The following figure shows the cable connection of the network camera and PC: Figure 3-1 Wiring over LAN Set the IP address of the camera for accessing via LAN. Steps: 1.
A-47 Mini Dome Camera • Quick Operation Guide Search online devices automatically: After launching the Advidia A Series Camera finder software, it will automatically search for A series camera every 15 seconds from the subnet where your computer is connected. It will display the total number and information of the found A series devices within the “Online Devices” tab. Device information includes the device type, IP address, port number, and gateway.
A-47 Mini Dome Camera • Quick Operation Guide Devices will be displayed in the list within 15 seconds after it goes online; it will be removed from the list in 45 seconds after it goes offline. Search online devices manually: You can also click to refresh the online device list manually. The newly searched devices will be added to the list.
A-47 Mini Dome Camera • Quick Operation Guide Figure 3-3 Select a Device Figure 3-4 Modify Network Parameters 3. Enter the IP address of network camera in the address field of the web browser to view the live video.
A-47 Mini Dome Camera • Quick Operation Guide The default value of the IP address is “192.0.0.64”. The default user name is “admin”, and password is “12345”. For accessing the network camera from different subnets, please set the gateway for the network camera after you log in.
A-47 Mini Dome Camera • Quick Operation Guide 4 Accessing via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 / Server 2008 32bits CPU: Intel Pentium IV 3.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 6.0 and above version, Apple Safari 5.02 and above version, Mozilla Firefox 3.5 and above version and Google Chrome8 and above version Steps: 1. Open the web browser. 2.
A-47 Mini Dome Camera • Quick Operation Guide Figure 4-1 Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in. You may have to close the web browser to finish the installation of the plug-in.
A-47 Mini Dome Camera • Quick Operation Guide Figure 4-2 Download Plug-in 31
A-47 Mini Dome Camera • Quick Operation Guide Figure 4-3 Install Plug-in (1) Figure 4-4 Install Plug-in (2) 6. Reopen the web browser after the installation of the plug-in and repeat steps 2-4 to login.