User Manual

A-47 Mini Dome Camera • Quick Operation Guide
10
2 Installation
Before you start:
 Make sure the device in the package is in good condition and all the
assembly parts are included.
 Make sure all the related equipment is powered off during the
installation.
 Check the specification of the products for the installation
environment.
 Make sure the power supply matches with your required voltage to
avoid damage.
 If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
 Make sure that the wall is strong enough to withstand three times
the weight of the camera.
Please pay attention to the following precautions to prevent IR
reflection:
● Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the installation
is finished. If there is dust or grease on the dome cover, clean
the dome cover with clean soft cloth and isopropyl alcohol.
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into