Datasheet
ABS1,4,5
ORDERING INFORMATION
HIGH ENVIRONMENTAL
RESISTANCE
TURQUOISE SWITCHES
ABS TYPE
VDE
6.4
19.3
11.1
Compliance with RoHS Directive
FEATURES
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
•We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
•Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
Type of
switch
ABS:
Turquoise
switch
S type
Wire and
terminal
position
1:
4:
5:
Straight type
Right angle
Left angle
Ter minal
1:
4:
5:
6:
.110 quick-connect
terminal
Solder terminal
PC board terminal
Wire leads
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Actuator
0:
1:
2:
3:
4:
6:
8:
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller
lever
Roller lever
Leaf lever
Operating
force by
pin plunger
(max.)
4:
5:
0.98 N
1.47 N
Contact*
0:
1:
4:
AgNi alloy
Au-clad
triple layer
Au-clad
double layer
Agency standard
3:
9:
UL/CSA/VDE/SEMKO
(AgNi alloy contact,
Au-clad triple layer type)
UL/CSA
(Au-clad double layer type)
Ex. ABS 1 1 1 0 4 0 3
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. As for wire position:
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
Straight type Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
AgNi alloy
0: AgNi alloy 1: Au-clad triple layer 4: Au-clad double layer
AgNi alloyAu-clad
CuNi alloy
Au-clad
CuNi alloy
All Rights Reserved © C
OPYRIGHT Panasonic Electric Works Co., Ltd.