Operation Manual

74
Chapter 4 Adjustments and Settings for Recording
Center Marker Display
A center marker is displayed when the menu option
MARKER in the DISPLAY SETUP screen is set to ON.
 NOTE
The center marker display appears only on the LCD monitor
and in the viewfinder. It is not superimposed on signals output
via the HD SDI MONITOR OUT and HDMI connectors.
Safety Zone Markers
A safety zone marker is displayed when the menu option
SAFETY ZONE is selected in the DISPLAY SETUP screen.
• OFF: Not displayed
• 90%:
indicates the display area on a normal household
TV
• 13:9: Indicates the display area available at a 13:9 aspect
ratio.
• 14:9: Indicates the display area available at a 14:9 aspect
ratio.
 NOTE
Safety zone markers appear only on the LCD monitor and in
the viewfinder. They are not superimposed on signals output
via the HD SDI MONITOR OUT and HDMI connectors.
Zebra Pattern Display
The AG-3DP1 can display two zebra patterns.
The zebra pattern set in the menu appears on the LCD
monitor and in the viewfinder when the ZEBRA button is
pressed or if the ZEBRA switch on the viewfinder is set to
ON.
ZEBRA button
Use the DISPLAY SETUP screen to set the level of zebra
pattern display.
Item Setting Description
ZEBRA1
DETECT
50%…70%…109%
Sets the level of the
right-leaning zebra
pattern 1.
ZEBRA2
DETECT
50%…85%…109%
Sets the level of the
left-leaning zebra
pattern 2.
ZEBRA2
ON, SPOT, OFF
Selects the ZEBRA2
type.
Underlined values indicate factory defaults.
SPOT
: A video level between ZEBRA1 and ZEBRA2
displays a zebra pattern.
SPOTOFFON
109%
0%
ZEBRA 2
DETECT
ZEBRA 2
ZEBRA 1
DETECT
Image level
 NOTE
The zebra pattern cannot be displayed when the 3D assist
function is operating.