Operation Manual

87
Chapter 5 Preparation
Preparing for Audio Input
Take the following steps to prepare the camera for
connecting audio input devices.
When Using the Front Microphone
The AG-MC900G stereo microphone kit (optional) can be
mounted on the microphone holder of the viewfinder.
1
Open the microphone holder.
Microphone holder
2
Mount the microphone and tighten the clamping
screw.
Clamping screw
3
Connect the microphone cable to the MIC IN
jack on the camera.
MIC IN jack
4
Set the AUDIO IN switch to FRONT depending
on the audio channel to be recorded.
AUDIO IN switch
 NOTE
When using the front microphone, you may replace the
microphone holder with the supplied one to reduce noise
during zooming.