VQT1F36_ENG_PP.book 1 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Operating Instructions High Definition Video Camera Model No. AG-HSC1UP Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida.
VQT1F36_ENG_PP.book 2 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your camera. Be sure to retain this manual as your convenient camera information source.
VQT1F36_ENG_PP.book 3 ページ ２００７年２月２６日 月曜日 午前１１時２９分 FCC NOTICE (USA) Declaration of Conformity Model Number: AG-HSC1UP Trade Name: PANASONIC Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support contact: Panasonic Broadcast & Television Systems Company 1-800-524-1448 This device complies with Part 15 of FCC Rules.
VQT1F36_ENG_PP.book 4 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Batteries 1) Battery pack (Lithium ion battery pack) ≥Use the specified unit to recharge the battery pack. ≥Do not use the battery pack with equipment other than the specified unit. ≥Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥Do not touch the plug terminals (i and j) with metal objects. ≥Do not disassemble, remodel, heat or throw into fire. 2) Button-type battery (Lithium battery) ≥Insert with poles aligned.
VQT1F36_ENG_PP.book 5 ページ ２００７年２月２６日 月曜日 午前１１時２９分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
VQT1F36_ENG_PP.book 6 ページ ２００７年２月２６日 Precautions USE & LOCATION WARNING ≥TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
VQT1F36_ENG_PP.book 7 ページ ２００７年２月２６日 ª Indemnity concerning recording content The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media. IMPORTANT ª Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights.
VQT1F36_ENG_PP.book 8 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Contents Quick Guide .......................................... 10 Recording Before using Before recording .................................. 43 Features of the High Definition Video Camera............................................... 13 Accessories .......................................... 18 Parts identification and handling ....... 19 Using the LCD monitor ........................ 24 Using the remote control.....................
VQT1F36_ENG_PP.book 9 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Contents Editing Others Editing scenes...................................... 74 Menus and Indications ...................... 105 Deleting scenes........................................74 Protecting scenes.....................................75 Menu list................................................. 105 Menus related to [ADVANCED] and [SETUP] ............................................. 107 Indications.............................................
VQT1F36_ENG_PP.book 10 ページ ２００７年２月２６日 Quick Guide 月曜日 午前１１時２９分 ª Removing the battery 1) Open the battery cover. ª Charging the battery A 2) Remove the battery. ≥Move A in the direction of the arrow to unlock it and then remove the battery. 1) Connect the AC cable to the AC adaptor and the AC outlet. 2) Put the battery on the battery mount by aligning the mark, and then securely plug it in. ≥The output plug of the AC cable is not completely connected to the AC adaptor jack.
VQT1F36_ENG_PP.book 11 ページ ２００７年２月２６日 月曜日 午前１１時２９分 ª Inserting/removing an SD card ª Recording still pictures (JPEG) 1) Set the mode dial to OFF. 2) Open the LCD monitor and then open the card slot cover. 1) Rotate the mode dial to select 3) Insert/remove the SD card into/from the card slot. . 2) Open the LCD monitor. 3) Press the PHOTO SHOT button halfway in order to adjust focusing.
VQT1F36_ENG_PP.book 12 ページ ２００７年２月２６日 ª Motion picture playback 1) Rotate the mode dial to select 月曜日 午前１１時２９分 ª Still picture (JPEG) playback . 2) Press the cursor button up and then left to select the (motion pict ure playback) tab. 1) Rotate the mode dial to select . 2) Press the cursor button up and then right to select the (still picture playback) tab. A A A Motion picture playback tab 3) Select the scene to be played back.
VQT1F36_ENG_PP.book 13 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Before using Features of the High Definition Video Camera Very clear high definition pictures This unit is an AVCHD format video camera for recording highly detailed high definition images on an SD card. You can watch images in high-resolution HD video if you connect this unit and a high definition TV and then play back the images.
VQT1F36_ENG_PP.book 14 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Watching high definition images If you connect this unit and a high definition TV with a HDMI cable (optional) and then play back the pictures, you can enjoy watching them in high definition. A B A High definition TV B HDMI cable (optional) ≥If you connect this unit to a TV that does not support high definition, the images will be standard quality.
VQT1F36_ENG_PP.book 15 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Using the remote control for the TV for playback If you connect this unit to a Panasonic TV compatible with EZ SyncTM (HDAVI ControlTM) with a HDMI cable, you can use the remote control for the TV for playback. Refer to the operating instructions of the TV for details.
VQT1F36_ENG_PP.book 16 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Listening in 5.1 channel surround sound This unit has 5 internal microphones and a Dolby Digital 5.1 Creator so you can record sound with presence that is even closer to the actual sound. The low bass area is sent to the 0.1 channel subwoofer and you can playback sound with three-dimensional presence if you connect to a device that is compatible with the 5.1 surround system.
VQT1F36_ENG_PP.book 17 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Saving the data on the SD card When the SD card is full or to prevent the data from being deleted, use the supplied software (HD Writer Ver1.0E for SD1) to copy the data on the SD card to the hard disk of the computer. A A USB cable (supplied) ª What you can do with HD Writer [Copy to PC] You can copy motion picture data and still picture data on an SD card to the hard disk of the computer.
VQT1F36_ENG_PP.book 18 ページ ２００７年２月２６日 Before using Accessories Check the accessories before using this unit.
VQT1F36_ENG_PP.
VQT1F36_ENG_PP.book 20 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using 15 16 17 15) Internal microphones (5.
VQT1F36_ENG_PP.book 21 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using 20 23 21 24 22 A/V COMPONENT MIC 28 DC IN 9.3V 25 26 27 29 30 20) Power LCD button [POWER LCD] (l 42) 21) Reset button [RESET] (l 118) 22) LCD monitor (l 24) Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
VQT1F36_ENG_PP.book 22 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using 33 31 34 35 32 31) 32) 33) 34) 35) Speaker Grip belt (l 23) Outlet USB terminal [ ] (l 90, 99) HDMI terminal [HDMI] (l 81, 83, 87) Battery cable cover Open the battery cable cover when you use the battery pack holder kit (VW-VH04; optional¢). 1 Open the battery cover. 3 Attach the battery pack holder kit. ≥Read the operating instructions of the battery pack holder kit for details on how to use it. 4 Close the battery cover.
VQT1F36_ENG_PP.book 23 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Using grip belt Adjust the length of the grip belt so that it fits your hand, and hold it properly. 1 Flip the belt. Lens hood Rotate the lens hood counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C. A B C 2 Put your hand through the grip belt. Tripod receptacle The tripod receptacle is a hole used to mount a tripod for the unit.
VQT1F36_ENG_PP.book 24 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Using the LCD monitor You can record the image while viewing it on the LCD monitor. 1 Place your finger on LCD monitor open latch and pull the LCD monitor out in the direction of the arrow. Using the remote control 1 2 3 PHOTO EXT DISPLAY SHOT DATE/ TIME 8 SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP SKIP MENU 5 2 Adjust the angle of the LCD 7 ZOOM VOL 4 ≥It can open up to 90o.
VQT1F36_ENG_PP.book 25 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using ª Install a button-type battery ª Remote control usable range Install the supplied button-type battery in the remote control before using it. The distance between the remote control and the unit’s remote control sensor A: Within approx. 5 m (16 feet) Angle: Approx. 10o up and 15o down, left, and right 1 While pressing the stopper A, pull out the battery holder.
VQT1F36_ENG_PP.book 26 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using Cards that you can use with this unit Card type SDHC Memory Card SD Memory Card Capacity 8 MB, 16 MB 32 MB, 64 MB, 128 MB Motion picture recording Cannot be used. Cannot be guaranteed in operation.¢ Still picture recording 256 MB, 512 MB, 1 GB, 2 GB 4 GB Refer to “About SD cards that you can use for motion picture recording”. Can be used.
VQT1F36_ENG_PP.book 27 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Before using ≥4 GB (or more) Memory Cards that do not have the SDHC logo are not based on SD Memory Card Specifications. ≥Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer), the time spent for recording may become longer and you may not be able to use the SD card. (l 79) (Do not format it on a PC etc.
VQT1F36_ENG_PP.book 28 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Setup ª Charging lamp Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥Connect the battery to an AC adaptor to recharge it. The battery cannot be recharged by simply inserting it into the unit. ≥If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor.
VQT1F36_ENG_PP.book 29 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Inserting/removing the battery Removing the battery 1 Open the battery cover. Inserting the battery 1 Open the battery cover. ≥Push A while sliding it. 2 Remove the battery. ≥Move A in the direction of the arrow to unlock it and then remove the battery. A 2 Insert the battery until it clicks paying attention to the direction of the battery. B Push the center of the battery until it locks. A 3 Close the battery cover.
VQT1F36_ENG_PP.book 30 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Charging time and recordable time ª About batteries that you can use for this unit The Panasonic battery that can be used with this unit is VW-VBG130. VW-VBG130 comes with a function to check whether the battery and unit can be safely used together. ≥Batteries made by other companies which have been certified by Panasonic may be used with this unit, but we offer no guarantee as to the quality, performance or safety of such batteries.
VQT1F36_ENG_PP.book 31 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup ª About the remaining battery capacity indication The remaining battery capacity is displayed in minutes when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. Connecting to the AC outlet ≥Even if the battery is inserted in this unit, it will not charge. DC IN 9.3V 30min ≥The display changes as the battery capacity reduces. # # # # .
VQT1F36_ENG_PP.book 32 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Selecting a mode (Turning the unit on/off) How to turn off the power Rotate the mode dial to switch to recording, playback, PC connection or power OFF. ≥Rotate the mode dial slowly. Set the mode dial to OFF. How to turn on the power While pressing the lock release button, set the mode dial to , or PC . ≥Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode.
VQT1F36_ENG_PP.book 33 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Turning the power on and off with the LCD monitor The power can be turned on and off with the LCD monitor when the mode dial is set to . ª To turn on the power Open the LCD monitor. A The status indicator A lights and the power turns on. ª To turn off the power Close the LCD monitor. Quick start When quick start is ON the battery power is still being consumed, even when the LCD monitor is closed.
VQT1F36_ENG_PP.book 34 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup 3 Open the LCD monitor. A Inserting/removing an SD card Be sure to set the mode dial to OFF before inserting/removing an SD card. If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost. The status indicator A lights red and the unit is put into recording pause approx. 1.7 seconds after it is turned on.
VQT1F36_ENG_PP.book 35 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup ª Concerning the SD card ≥Do not touch the terminals on the back of the SD card. ≥Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card. Save important data recorded on this unit to a PC using the USB cable (supplied), HD Writer Ver1.0E for SD1 etc. (l 102) (We recommend using HD Writer Ver1.0E for SD1 to acquire data recorded on this unit.
VQT1F36_ENG_PP.book 36 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Operations during recording ¬ Rotate the mode dial to select Operations during playback . 1 Press the center of the cursor button, and icons will be displayed on the screen. ¬ Rotate the mode dial to select . 1 Move the cursor button up, down, left or right to select the scene to be played back and press the cursor button. ≥The indication disappears when the center of the cursor button is pressed again.
VQT1F36_ENG_PP.book 37 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup About the operation icons displayed in each mode Recording mode Icon Direction Page Backlight compensation 54 2 Fade 54 1 Help mode 39 3 MagicPix 55 2 Soft skin mode 56 1 Tele macro 56 Ø 3 Self-timer 57 ß 2 Flash 57 1 Red eye reduction 58 (1/3) (2/3) (3/3) Function 3 Set the AUTO/MANUAL/FOCUS switch to MANUAL.
VQT1F36_ENG_PP.
VQT1F36_ENG_PP.book 39 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Using the menu screen Help mode The help mode explains the operation icons displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in recording mode. ¬ Rotate the mode dial to select . Refer to “Menu list” (l 105) for information about the menus. 1 While stopped, press the MENU button. 1 Press the cursor button to display the icon. 2 Move the cursor button right to select [ ].
VQT1F36_ENG_PP.book 40 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup 4 Move the cursor button up or down in order to select the submenu item. To exit the menu screen Press the MENU button. C ≥The menu screen does not appear during recording or playing. You cannot start other operations while the menu screen appears. Operating with remote control C Current settings on menus 5 Move the cursor button right or press the cursor button.
VQT1F36_ENG_PP.book 41 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Setting date and time Changing the date and time display style When the unit is turned on for the first time, a message asking you to set the date and time will appear. ≥Move the cursor button up or down to select [YES], press the center of the cursor button and then perform steps 2 and 3 below to set the date and time. [DATE] If the screen shows the incorrect date and time, then adjust it. ¬ Rotate the mode dial to select .
VQT1F36_ENG_PP.book 42 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Setup Switching the language You can switch the language on the screen display or the menu screen. 1 Press the MENU button, then select [LANGUAGE] and press the center of the cursor button. 2 Select [English] and press the ≥After adjustments are made if no operations are performed for about 2 seconds, the bar will disappear. ≥Press the MENU button to exit the menu screen.
VQT1F36_ENG_PP.book 43 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Recording Before recording First, format the SD card if one which has been used on another device is going to be used for the first time on this unit. (l 79) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC or other device before proceeding with the formatting. We recommend using HD Writer Ver1.0E for SD1 to import data recorded on this unit.
VQT1F36_ENG_PP.book 44 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording ª About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and color balance (white balance) and focusing will be adjusted automatically. AUTO MANUAL FOCUS – Automatic white balance (l 123) – Auto focus (l 124) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250 in recording mode.
VQT1F36_ENG_PP.book 45 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Recording motion pictures Record motion pictures on an SD card. ≥Use an SD card that can be used for motion picture recording. (l 26) ≥This unit records high definition images that are compatible with the 16:9 aspect ratio of a wide-screen TV. 1 Rotate the mode dial to select . The lens cover opens automatically. 2 Open the LCD monitor.
VQT1F36_ENG_PP.book 46 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording ª Screen indications in the recording mode A B C A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R0min] flashes red.) C Recording time elapsed ≥Maximum number of recordable scenes: 999 (It may not be possible to record 999 scenes even if there is available memory on the SD card.
VQT1F36_ENG_PP.book 47 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Recording modes/recordable time available for the motion picture Switch the picture quality of the motion pictures to be recorded. ¬ Rotate the mode dial to select . Press the MENU button, then select [VIDEO] # [REC MODE] # desired item and press the cursor button.
VQT1F36_ENG_PP.book 48 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Recording still pictures (JPEG) Record the still picture on an SD card. ≥This number of recording pixels for still pictures is compatible with the 16:9 aspect ratio of a wide-screen TV. They are recorded at 1920k1080. 1 Rotate the mode dial to select . A B A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful.
VQT1F36_ENG_PP.book 49 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording ≥If the [PICT. QUALITY] is set to [ ], mosaic-pattern noise may appear on a playback image depending on the picture content. ≥While this unit accesses the SD card ( is displayed/the card access lamp is lit), do not perform the following operations. The SD card or the recorded data may be damaged. – Turn the unit off. – Open the card slot cover and remove the SD card. – Operate the mode dial.
VQT1F36_ENG_PP.book 50 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Switching the shutter effect on/off You can add a shutter sound when recording still pictures. Press the MENU button, then select [PICTURE] # [SHTR EFFECT] # [ON] or [OFF] and press the cursor button. About simultaneous recording (recording still pictures while recording motion pictures) You can record still pictures even while recording motion pictures.
VQT1F36_ENG_PP.book 51 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Picture Quality/Approximate Number of Recordable Pictures on an SD Card Picture quality Selecting the picture quality. Press the MENU button, then select [PICTURE] # [PICT. QUALITY] # desired item and press the cursor button. : Still pictures with a high picture quality are recorded. : Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality.
VQT1F36_ENG_PP.book 52 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Various recording functions Zoom in/out function ≥If the zoom lever is pushed to the end, you can zoom from 1k up to 12k in as fast as approx. 1.8 seconds. ≥When the zoom speed is high, the subject may not be focused easily. You can zoom in up to 12k optically. ¬ Rotate the mode dial to select . Move the zoom lever. Digital zoom function If the zoom magnification exceeds 12k, then the digital zoom function will be activated.
VQT1F36_ENG_PP.book 53 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Recording yourself About using the zoom microphone function The zoom microphone is linked to the zooming operation and the sound sensitivity direction (directivity) of the microphone changes as you zoom. Far away sounds are recorded more clearly if you zoom in (close-up) and the surrounding sound is recorded with presence if you zoom out (wide angle). ¬ Rotate the mode dial to select You can record yourself while viewing the LCD monitor.
VQT1F36_ENG_PP.book 54 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Backlight compensation function Fade in/fade out function This is for preventing a backlit subject from being darkened. Use this function when the light is emanating from behind the subject and the subject appears dark. ¬ Rotate the mode dial to select . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. Fade in: The image and audio gradually appear.
VQT1F36_ENG_PP.book 55 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording 4 Press the recording start/stop button. Pause recording. (Fade out) MagicPix function This allows recording in dark locations. This function allows you to record color subjects in dark locations (Minimum required illumination: approx. 2 lx) to stand out against the background. Attach this unit to a tripod, and you can record images free from vibration. Recorded scene is seen as if frames were missed.
VQT1F36_ENG_PP.book 56 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Soft skin mode Tele macro function This makes skin colors appear softer for a more attractive appearance. This is for close-ups bringing only what you want to record into focus. This is more effective if you record a subject more closely from the torso up. ¬ Rotate the mode dial to select 1 Press the cursor button. Then . move the cursor button down to display the icon shown in the illustration.
VQT1F36_ENG_PP.book 57 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Self-timer recording You can record still pictures on an SD card using the timer. ¬ Rotate the mode dial to select 1 Press the cursor button. Then . move the cursor button down to display the icon shown in the illustration. ≥The self-timer is canceled if the power is turned off or the mode dial is operated. ≥The self-timer standby mode is canceled when you press the recording start/stop button to start motion picture recording.
VQT1F36_ENG_PP.book 58 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording ≥When [FLASH AUTO] is set, the ambient brightness is automatically detected, and the flash will activate only when necessary. (If the flash is not necessary, the [ßA] indicator will not appear when the PHOTO SHOT button is pressed halfway.) ≥This function’s default setting is [FLASH AUTO]. 3 Press the PHOTO SHOT button. Red eye reduction function Reduces the phenomena where human eyes become red from flashes. 1 Press the cursor button.
VQT1F36_ENG_PP.book 59 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Image stabilizer function Guide line function This is for reducing image shakes (jitter) during recording. This is for viewing the slope and the balance of the image while recording or playing back. Reduces the image shaking (jitter) due to hand movement when recording. ¬ Rotate the mode dial to select . Press the MENU button, then select [BASIC] # [O.I.S.] # [ON] and press the cursor button.
VQT1F36_ENG_PP.book 60 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording To cancel the guide line function Press the MENU button, then select [BASIC] or [PLAY SETUP] # [GUIDE LINES] # [OFF] and press the cursor button. ≥The guide lines do not appear on the images actually recorded. Microphone level This is for adjusting the microphone input level. When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted.
VQT1F36_ENG_PP.book 61 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording 2 Move the cursor button left or right to adjust the microphone input level. A B D C E F A D B C To return to automatic setting Press the MENU button, then select [VIDEO] # [MIC LEVEL] # [AUTO], and press the cursor button. ≥Adjust the gain value so that the last 2 bars of the microphone input level on the center of the screen are not red. (Otherwise, the sound is distorted.
VQT1F36_ENG_PP.book 62 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Zebra display Color bar This is for displaying the parts that are too bright. This is for displaying a color bar to check the color tone. Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). This unit displays a 7 color bar which is useful for adjusting the picture quality of the TV or the external monitor.
VQT1F36_ENG_PP.book 63 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording Manual recording functions Scene mode This is for recording in various situations. When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ¬ Rotate the mode dial to select . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. AUTO MANUAL FOCUS 2 Press the MENU button, then select [BASIC] # [SCENE MODE] # desired item and press the cursor button.
VQT1F36_ENG_PP.book 64 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording 4 Move the cursor button left or Manual focus adjustment If auto focusing is difficult due to the conditions, then manual focusing is available. ¬ Rotate the mode dial to select 1 right to bring the subject into focus. . (When MF assist function is used) Press the MENU button, then select [ADVANCED] # [MF ASSIST] # [ON] and press the cursor button. The center of the screen is enlarged.
VQT1F36_ENG_PP.book 65 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording White balance This is for recording in natural colors. The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ¬ Rotate the mode dial to select . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. ≥Lights used for wedding receptions at hotels, stage spotlights in theatres ≥Sunrise, sunset etc.
VQT1F36_ENG_PP.book 66 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording ª About the white balance sensor A The white balance sensor A detects the type of light source during recording. Do not cover the white balance sensor during recording, or it may not function properly. ª About the black balance adjustment This is one of the 3CCD system functions that automatically adjusts the black when the white balance is set in the manual adjustment mode.
VQT1F36_ENG_PP.book 67 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Recording ≥When the iris value is adjusted to brighter than [OPEN], it changes to the gain value. To restore to automatic adjustment Set the AUTO/MANUAL/FOCUS switch to AUTO. ≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value.
VQT1F36_ENG_PP.book 68 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Playback 3 Select the scene to be played Playback Motion picture playback back. Play back motion pictures. 1 Rotate the mode dial to select . B C D The lens cover closes. 2 Press the cursor button up and then left to select the picture playback) tab. (motion A B Previous page C Next page D Scene number The selected scene will be encircled by a yellow frame.
VQT1F36_ENG_PP.book 69 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Playback ª About motion picture compatibility ≥This unit is based on the AVCHD format. ≥The video signal that can be played back on this unit is 1440k1080/60i. ≥This unit may degrade or not playback motion pictures recorded or created on other products, and other products may degrade or not playback motion pictures recorded on this unit, even if the products support the AVCHD. ≥No sound will be heard except during normal playback.
VQT1F36_ENG_PP.book 70 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Playback Frame-by-frame playback To adjust the volume The motion picture is advanced one frame at a time. Adjust the speaker volume during playback. 1 Move the cursor button up during Move the volume lever to change the volume level. playback to pause the playback. 2 Move the cursor button right. (The frames will be advanced one at a time in the reverse direction when you move the cursor button left.
VQT1F36_ENG_PP.book 71 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Playback Playing back motion pictures by date Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. 1 Press the MENU button, then Repeat playback Playback of the first scene starts after playback of the last scene finishes. Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [ON] and press the cursor button.
VQT1F36_ENG_PP.book 72 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Playback Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Still picture (JPEG) playback Play back the still pictures recorded on the card. 1 Rotate the mode dial to select . Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [ON] and press the cursor button. The lens cover closes.
VQT1F36_ENG_PP.book 73 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Playback ≥If 9 or more files have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting / by moving the cursor button left and right and then pressing the center of the cursor button. ≥The file number display switches to the page number when the still picture playback tab or / is selected. 4 Press the cursor button.
VQT1F36_ENG_PP.book 74 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Editing Editing Deleting multiple scenes from the thumbnail display Editing scenes ¬ Rotate the mode dial to select and then select the picture playback) tab. Deleting scenes This is for deleting scenes recorded on SD cards. (motion 1 Press the button while the thumbnail view screen is displayed. The deleted scenes cannot be restored. Deleting scenes one at a time ¬ Rotate the mode dial to select and then select the picture playback) tab.
VQT1F36_ENG_PP.book 75 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Editing 4 (Only when [SELECT] is selected in step 2) Press the button. 5 When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-5. To complete editing Press the MENU button. ≥Scenes which cannot be played back (the thumbnails are displayed as ) cannot be deleted. ≥Protected scenes cannot be deleted.
VQT1F36_ENG_PP.book 76 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Editing Editing still pictures Deleting still pictures This is for deleting still picture files recorded on SD cards. The deleted files cannot be restored. Deleting multiple files from the thumbnail display ¬ Rotate the mode dial to select and then select the playback) tab. (still picture 1 Press the button while the thumbnail view screen is displayed.
VQT1F36_ENG_PP.book 77 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Editing 5 When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button. ª Deleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased. ≥Protected files cannot be deleted.
VQT1F36_ENG_PP.book 78 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Editing To cancel all DPOF settings DPOF setting This is for writing the printing data on an SD card. You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the playback) tab. (still picture 1 Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the cursor button.
VQT1F36_ENG_PP.book 79 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Card management Card management Formatting Formatting an SD card This is for initializing cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer etc. ¬ Rotate the mode dial to select or . 1 Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the cursor button.
VQT1F36_ENG_PP.book 80 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products With other products ≥Use the AC adaptor to free you from worrying about the battery running down. With a TV ª To display the on-screen information on the TV Playback on TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals. When connecting to a HDMI terminal, a connection cable (optional) is necessary.
VQT1F36_ENG_PP.book 81 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products 1 Connecting with a HDMI cable (optional) What is HDMI? HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit and a HDMI compatible high definition TV and then play back the recorded high definition images (l 13), you can enjoy them in high resolution with high quality sound.
VQT1F36_ENG_PP.book 82 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products ª About the settings when connecting with HDMI When this unit is connected to another device with a HDMI cable, the output setting on this unit can be changed. HDMI output resolution You can switch the method to output the images. Press the MENU button, then select [SETUP] # [HDMI RESOLUTION] # desired item and press the cursor button.
VQT1F36_ENG_PP.book 83 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products 2 Listening in 5.1 channel sound If you connect this unit and an AV amplifier with a HDMI terminal with a HDMI cable and then playback, you can listen to 5.1 channel sound recorded from the internal microphones. ≥Please read the operating instructions for the AV amplifier, speakers and TV for more information about how to connect them etc.
VQT1F36_ENG_PP.book 84 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products 3 Connecting with the component cable (supplied) and the AV cable (supplied) 1 Connect this unit and a TV with the component cable (supplied) and the AV cable (supplied). A/V A COMPONENT C COMPONENT VIDEO IN AUDIO IN B A Component cable (supplied) B AV cable (supplied) ≥Connect to terminals of the same color. ≥The component terminal C is for outputting images only so be sure to also connect the AV cable.
VQT1F36_ENG_PP.book 85 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products ª If the image or audio from this unit is not output on the TV ≥Check that the plugs are inserted as far as they go. ≥Check the connected terminal. ≥Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) ≥If the images are not displayed correctly on a wide-screen TV, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.
VQT1F36_ENG_PP.book 86 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products 4 Connecting with the AV cable (supplied) 1 Connect this unit and a TV with the AV cable (supplied). VIDEO IN AUDIO IN A A AV cable (supplied) 2 Set the mode dial to to turn on the power. 3 Change the input channel on the TV. Example: Select the [Video 2] channel etc. (The name of the channel may differ depending on the connected terminal.) 4 Start playback on this unit. The image and audio are output on the TV.
VQT1F36_ENG_PP.book 87 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products Playback using EZ Sync™ (HDAVI Control™) If you connect this unit to a Panasonic TV compatible with EZ SyncTM (HDAVI ControlTM) with a HDMI cable, the following linked operations become possible. ≥You can use the remote control for the TV to control playback on this unit. ≥If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
VQT1F36_ENG_PP.book 88 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products 5 Operate with the remote control for the TV. 1) 2) A DISPLAY ON/OFF B C D 1) Press the button up, down, left or right to select a scene or file to be played back, and then press the button in the center to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
VQT1F36_ENG_PP.book 89 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products Dubbing images onto a connected DVD recorder or video device ≥If the date and time display and function indication are unnecessary, cancel them before dubbing. (l 41, 80) This is for dubbing images recorded on this unit onto a DVD recorder, video device etc. ≥Images are dubbed in standard quality. ≥Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a video device.
VQT1F36_ENG_PP.book 90 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ≥Use the AC adaptor to free you from worrying about the battery running down. ¬ Insert an SD card with recorded images in this unit and then set the mode dial to to turn on the power. 1 Connect this unit and a printer.
VQT1F36_ENG_PP.book 91 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With other products 7 Select the layout setting on [PAGE LAYOUT]. [STANDARD]: Layout specific to the printer [ ]: No frame print [ ]: Frame print ≥You cannot set page layouts not supported on the printer. 8 Select [PRINT] # [YES] and press the cursor button to print the pictures. ≥Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed. When you stop printing halfway Move the cursor button down.
VQT1F36_ENG_PP.book 92 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer With a computer Before using with a computer What you can do with a computer Data type Can do Software used [Copy to PC] Motion picture [Write data to media]* [Copy between media]* HD Writer Ver1.0E for SD1 [Easy editing] Still picture Playing back on a computer Standard Windows picture viewer or a commercially available picture viewer Copying files to a computer Windows Explorer Refer to P104 if using a Macintosh.
VQT1F36_ENG_PP.book 93 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ≥The software is the same as the software on the CD-ROM provided with Panasonic High Definition Video Camera HDC-SD1. ª HD Writer Ver1.
VQT1F36_ENG_PP.book 94 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
VQT1F36_ENG_PP.book 95 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer Operating environment ≥A CD-ROM drive is necessary to install the supplied software applications. (A compatible drive and media are necessary for writing to a DVD.) ≥When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. ≥Use the supplied USB cable when connecting to the computer.
VQT1F36_ENG_PP.book 96 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer ≥DVD discs authored with this software are not guaranteed to play in all DVD players that do not support the AVCHD. ≥Operation is not guaranteed on Microsoft Windows XP Media Center Edition, Tablet PC Edition and not compatible with 64 bit operation systems. ≥This software is not compatible with a multi-boot environment. ≥This software is not compatible with a multi-CPU environment.
VQT1F36_ENG_PP.book 97 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥Before starting the installation, close any other software applications which are running. ≥Do not perform any other operations on your computer while the software is being installed. Installing HD Writer Ver1.
VQT1F36_ENG_PP.book 98 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer 6 Click [Finish]. Software application uninstallation Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)]. The computer must be rebooted for the application to work.
VQT1F36_ENG_PP.book 99 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer Connection and recognition 3 Connect this unit and a computer. Connection and recognition procedures After the software applications are installed, this unit must be connected to the computer and be correctly recognized by the computer. ≥Connect after installing the software applications. ≥Remove the supplied CD-ROM if it is inserted in the computer.
VQT1F36_ENG_PP.book 100 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer About the computer display When the unit is connected to a computer, it is recognized as an external drive. [Removable Disk] is displayed in [My Computer]. Example folder structure of an SD card: Removable Disk DCIM 100CDPFP MISC AVCHD AVCHDTN BDMV ≥AVCHD format motion picture files ([00000.MTS] etc.) are saved in the [BDMV] folder. ≥The motion picture thumbnails are recorded in the [AVCHDTN] folder.
VQT1F36_ENG_PP.book 101 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer To disconnect USB cable safely 2 Click the [Hardware] tab, then click [Device Manager]. 1 Double click the icon in task tray displayed on the computer. Hardware disconnect dialogue appears. ≥Depending on your computer’s settings, this icon may not be displayed. 2 Select [USB Mass Storage Device] and click [Stop]. 3 Verify [MATSHITA HDC-SD1 USB Device] is selected and click [OK].
VQT1F36_ENG_PP.book 102 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer Using HD Writer Ver1.0E for SD1 3 Connect this unit and a computer. Using HD Writer Ver1.0E for SD1, you can copy images recorded on this unit to the hard disk of the computer. When you want to playback images, write back the images from the hard disk of the computer to an SD card. You can then connect this unit to a TV to watch the images. (l 80) ≥When using HD Writer Ver1.
VQT1F36_ENG_PP.book 103 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer 6 Click the [Start copying] button. ≥A confirmation message appears. Click [Yes] and copying starts. ≥After copying is complete, a message appears. If [Yes] is clicked, all the motion pictures and still pictures on the SD card will be deleted. ª Writing back to an SD card ≥Insert an SD card in this unit and format the card. (l 79) (Use an SD card that can be used for motion picture recording.
VQT1F36_ENG_PP.book 104 ページ ２００７年２月２６日 月曜日 午前１１時２９分 With a computer If using Macintosh ≥Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥Apple, Mac OS is either registered trademarks or trademarks of Apple Computer, Inc. in the United States and/or other countries. ≥PowerPC is a trademark of International Business Machines Corporation.
VQT1F36_ENG_PP.book 105 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Others Menus and Indications Menu list Recording menus ª [BASIC] [SCENE MODE] (l 63) [D.ZOOM] (l 52) [O.I.S.
VQT1F36_ENG_PP.
VQT1F36_ENG_PP.book 107 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Menus related to [ADVANCED] and [SETUP] ≥Underlined items are the initial shipping condition. ª [REC LAMP] ≥[OFF] ≥[ON] The recording lamp lights during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording. ª [DISPLAY] ≥[OFF] ≥[ON] The screen indications are selected as shown in the illustration below.
VQT1F36_ENG_PP.
VQT1F36_ENG_PP.book 109 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others ª Playback indications Motion picture playback 2.1Ｍ Number of recording pixels for still pictures 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
VQT1F36_ENG_PP.book 110 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Messages CANNOT RECORD. Data writing to the SD card has failed. NO DATA. There are no motion pictures or still pictures recorded on the SD card. If this message appears although data is recorded on the SD card, the condition of the card is probably not stable. Turn off the power and then turn it on again. CANNOT BE USED DUE TO INCOMPATIBLE DATA. The recording format is different so it cannot be used.
VQT1F36_ENG_PP.book 111 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others CANNOT PROTECT. Scenes on SD cards for which the top menu has been created with HD Writer Ver1.0E for SD1 cannot be protected. (l 75) AGS MODE ON-REC PAUSED The AGS function is activated. (l 44) PUSH THE RESET SWITCH. An irregularity in the unit has been detected. Press the RESET button to restart the unit. (l 118) CANNOT SET. The [GUIDE LINES], [ZEBRA], [MF ASSIST] and [MIC LEVEL] menu settings cannot be set when the color bar is set.
VQT1F36_ENG_PP.book 112 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others About recovery When the SD card is accessed, you try to playback a scene or faulty control information is read, one of the messages below may be displayed. (Depending on the error, this may take time.) CONTROL DATA ERROR HAS BEEN DETECTED. When connecting to AC adaptor or the remaining capacity of the battery is enough: [FINISHED.] When the remaining capacity of the battery is low: [PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.
VQT1F36_ENG_PP.book 113 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
VQT1F36_ENG_PP.book 114 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Troubleshooting ª Unit operations Problem Check points This unit cannot be turned on. ≥Is the battery fully charged? # Charge it with the AC adaptor. (l 28) ≥The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥Is the LCD monitor open? This unit is turned off automatically.
VQT1F36_ENG_PP.book 115 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Problem This unit cannot be operated though powered up. This unit does not operate normally. Check points ≥The unit cannot be operated if the LCD monitor is not opened. ≥Press the RESET button. (l 118) If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
VQT1F36_ENG_PP.book 116 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Problem Check points Auto focus function does not work. ≥Is manual focus mode selected? # Set the AUTO/MANUAL/FOCUS switch to AUTO. ≥Are you trying to record a scene which is hard to bring into focus in auto focus mode? # There are some recording subjects and surroundings for which the auto focus does not operate correctly. (l 124) If so, use the manual focus mode to adjust the focus. (l 64) Recorded still pictures are not clear.
VQT1F36_ENG_PP.book 117 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Problem Check points Scenes cannot be deleted. ≥Is the scene on the SD card protected? # Protected scenes cannot be deleted. Release the protect setting. (l 75) ≥Scene which cannot be displayed as thumbnails (the thumbnails are displayed as ) cannot be deleted. If the scenes are unnecessary, format the card to erase the data. (l 79) Please be aware that if a card is formatted then all the data recorded on the card will be erased.
VQT1F36_ENG_PP.book 118 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Problem “PUSH THE RESET SWITCH.” is displayed. Check points ≥The unit has automatically detected an error. Press the RESET button with the projecting part of the grip belt A. This will restart the unit. A 1 ≥If you do not press the RESET button, the power to this unit is turned off automatically about 1 minute later. ≥Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair.
VQT1F36_ENG_PP.book 119 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others ª When connected to another device Problem Check points EZ Sync does not work. ≥Are you connecting with the component cable or the AV cable? # Connect with a HDMI cable (optional). (l 87) ≥Is the [EZ Sync] setting appropriate? # Press the MENU button, then select [SETUP] # [EZ Sync] # [ON] with the cursor button. ≥Depending on HDMI terminal of the TV, the input channel may not switch automatically.
VQT1F36_ENG_PP.book 120 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
VQT1F36_ENG_PP.book 121 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. In cold areas, the full charge indication may not appear or the low battery indication may appear about 5 minutes after starting use. At high temperatures, the protection function may be triggered, making it impossible to use the unit.
VQT1F36_ENG_PP.book 122 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others About the SD card ≥The memory capacity indicated on the label of an SD card is the total of the capacity for copyright protection and management and the capacity which can be used on the unit, a computer etc. ≥During prolonged use, the unit’s surfaces and the SD card will heat up slightly. This is normal. Always set the mode dial to OFF when inserting or removing an SD card.
VQT1F36_ENG_PP.book 123 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
VQT1F36_ENG_PP.book 124 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Outside of the effective range of automatic white balance adjustment, the image will become reddish or bluish. Even within the effective range of automatic white balance adjustment, the automatic white balance adjustment may not function properly if there is more than one light source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode.
VQT1F36_ENG_PP.book 125 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 8.0 W Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/4z 3CCD image sensor Total: 560 Kk3 Effective pixels: Motion picture: 520 Kk3 Still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 4.0 mm to 48.
VQT1F36_ENG_PP.book 126 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Component terminal output level Y: 1.0 Vp-p, 75 h Pb: 0.7 Vp-p, 75 h Pr: 0.7 Vp-p, 75 h HDMI terminal output level HDMI Ver. 1.2a [1125i (1080i)/525p (480p)] Audio output level (Line) 316 mV, 600 h Mic input Mic sensitivity j50 dB (0 dB=1 V/Pa, 1 kHz) (‰ 3.5 mm stereo mini jack) USB Card reader/writer function (No copyright protection support) Hi-Speed USB (USB 2.
VQT1F36_ENG_PP.book 127 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Still pictures Recording media SD Memory Card: 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (FAT12 and FAT16 system corresponding) SDHC Memory Card: 4 GB (FAT32 system corresponding) Compression JPEG (Design rule for Camera File system, based on Exif 2.
VQT1F36_ENG_PP.book 128 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Optional accessories Others The optional accessories are the same as for the Panasonic High Definition Video Camera HDC-SD1. Accessory No.
VQT1F36_ENG_PP.book 129 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Limited Warranty (For USA Customers) PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA PANASONIC PUERTO RICO INC. Ave. 65de Infanteria, Km.9.
VQT1F36_ENG_PP.book 130 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others LIMITS AND EXCLUSIONS There are no express warranties except as listed above. THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGE TO MEDIA) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THE WARRANTY.
VQT1F36_ENG_PP.book 131 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others LIMITED WARRANTY STATEMENT (For Canadian Customers) Panasonic Canada Inc. (also known as PCI) warrants this product to be free of defects in material and workmanship under normal use during the applicable warranty coverage period described below. PCI agrees to repair, or at its option, exchange, any part that becomes defective. However, the product must be purchased and serviced in Canada.
VQT1F36_ENG_PP.book 132 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Index Others ª Numerics 5.1 channel ....................................................83 ª A A/V terminal .......................................21, 84, 86 AC adaptor .......................................28, 31, 121 Aperture .........................................................66 Auto focus ....................................................124 Auto Ground-Directional Standby (AGS) .......44 Automatic white balance ...................
VQT1F36_ENG_PP.book 133 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others ª R Recordable time .......................................30, 47 Recording lamp ............................................107 Recording modes ...........................................47 Recording time elapsed .................................46 Red eye reduction ..........................................58 Remaining battery capacity indication ...........31 Remaining number of still pictures .................
VQT1F36_ENG_PP.book 134 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others Spanish Quick Use Guide/Guía española para el uso rápido Others ª Extracción de la batería 1) Abra la tapa de la batería. ª Carga de la batería A 2) Extraiga la batería. ≥Deslice A en la dirección de la flecha para desbloquearlo y luego extraiga la batería. 1) Conecte el cable de CA al adaptador de CA y a la toma de CA. 2) Instale la batería en el compartimiento alineando la marca y, a continuación, conéctela de forma segura.
VQT1F36_ENG_PP.book 135 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others ª Insertar/extraer una tarjeta SD 1) Ajuste el selector de modo en la posición OFF. 2) Abra la pantalla LCD y luego abra la tapa de la ranura de la tarjeta. 4) Vuelva a pulsar el botón de inicio/parada de grabación para hacer una pausa en la grabación. ª Grabación de fotografías (JPEG) 3) Inserte/extraiga la tarjeta SD de la ranura de la tarjeta.
VQT1F36_ENG_PP.book 136 ページ ２００７年２月２６日 月曜日 午前１１時２９分 Others ª Reproducción de películas 1) Gire el selector de modo para seleccionar . 2) Pulse el cursor hacia arriba y luego hacia la izquierda para seleccionar la ficha (reproducción de películas). A ª Reproducción de fotografías (JPEG) 1) Gire el selector de modo para seleccionar . 2) Pulse el cursor hacia arriba y luego hacia la derecha para seleccionar la ficha (reproducción de fotografías).
VQT1F36_ENG_PP.
VQT1F36_ENG_PP.
VQT1F36_ENG_PP.
VQT1F36_ENG_PP.book 140 ページ ２００７年２月２６日 月曜日 午前１１時２９分 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196 Southeast Region: (201) 348-7162 WESTERN ZONE: 3330 Cahuenga Blvd W.
