User Manual

35
4-1. Monitoring 4K & UHD image
The AG-UX180 is equipped with an HDMI 2.0 output port (HDMI1.4a for AG-UX90). It allows the
camera to output stunning UHD/59.94p or 50.00p images (UHD/29.97p for AG-UX90) in playback
mode and camera through mode.
Note: Output image is down-converted to 1080p from UHD/59.94p or 50p once recording starts.
When monitor TV and/or receiver devices are not HDMI 2.0 compliant, acceptable frame rate in the
devices will usually be limited up to 29.97p at UHD. See user’s guide of your device for
performance specifications.
When viewing UHD/59.94p and 50.00p images from AG-UX180 with a device that does not
support HDMI 2.0, but equipped with Four SDI input for UHD (like the Panasonic BT-4LH310), use
HDMI2.0 to HD-SDI converter such as AJA HA5-4K.
Setting HDMI output
1. MENU > OUTPUT SETUP > OUTPUT SEL: HDMI
2. MENU > OUTPUT SETUP > RESOLUTION: SYSTEM (output signal resolution follows the
system setting)
* See 7-2. Output signal for more details.
4. Understanding advanced features
4K monitor TV
supports
HDMI 2.0
Acceptable video formats*
4K/24.00p *
UHD/59.94p **
UHD/50.00p **
UHD/29.97p
UHD/25.00p *
UHD/23.98p
* AG-UX180 only
** In playback or camera
through mode only.
(i.e. not recording mode).
Acceptable video formats
4K/24.00p *
UHD/29.97p
UHD/25.00p *
UHD/23.98p
* AG-UX180 only
4K monitor TV
supports
HDMI 1.4a
(BT-4LH310 etc.)
UX180
UX90