Panasonic DVD/VCR DECK Operating Instructions Model No. AG-VP310 Professional Connections and Initial Setup D I G I T A L Procedures DIEITALAUmO / Industrial are on pages Video 12 to 17. AUDIO/VIDEO MULTI FORMAT PLAYBACK "kAbility to play back may depend on recording E conditions. Matsushita ElectricSTAR Corporation s an ENERGY cePartner,of America has determined that this product or product model meets the ENERGY STAR ce guidelines for energy efficiency.
ImportantSafeguardsandPrecautions TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR DAMAGE TO THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE PRODUCT. I INSTALLATION SOURCE I I POWER 2 Operate only from a power source indicated on the unit or in this manual, If necessary, have your Electric Utility Service Company or Video Products Dealer verity the power source in your home.
SafetyPrecautions/Mesures desdcuritd To prevent fire or shock hazard, or moisture. r!_ _o_ do not expose this equipment to rain _I To prevent electric shock, match wide blade of plug to wide slot, fully insert. AVERTISSEMENT: Afin de prevenir tout risque d'incendie ou de chocs electriques, exposer cet appareil a la pluie ou a une humidite excessive.
Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your DECK. • Date of Purchase • Dealer Purchased From • Dealer Address • Dealer Phone No. • Model No. AG-VP310 • Serial No. A [] . • [] Batteries " ". jJ _ RF Coaxial Cable LSJA0418 " 1) Open cover. 2) Insert batteries batteries.
Important Safeguards and Precautions ......................... 2, 3 Before Using ......................................................................... 4 DECK & Cassette Information ........................................ 6,7 Location of Controls .................................................... 8 ~ 10 Displays (On Screen Displays and Multi Function Display) ................. 11 Connections ...............................................................
• . . A e- o oe- o - II II Break off the tab to prevent recording. Record Type Screw driver I Capacity Cover the hole record again with cellophane To i I] _ " A • DVD-RAM discs must meet the following conditions for this unit to be able to play them. • Non-cartridge discs • Discs that can be removed from 12 cm (5") 9.4 GB (double-sided) and 4.7 GB (single-sided) __ • 8 cm (3") 2.
L_]VF_41_ Power Source: Power Consumption: Video Signal: Video Recording System: Audio Track: Tuner Broadcast Channels: CABLE Channels: Input/Output Terminal: Input Terminal: Output Terminal: Operating Temperature: Operating Humidity: Weight: Dimensions: Discs Played (1) DVD-Video DVD-Audio DVD-RAM Disc Disc Disc (2) Compact Disc (CD-DA) (CD-R/CD-RW, MP3, WMA, JPEG) Digital Audio Pickup: Note: Output: • Designs and 120 V AC, 60 Hz Power On: Approx. 28 watts, Power Off: Approx.
i_ Bold: VCR Function Italic: DVD Function I a LOlL_O]llqLe]i EJECT / OPEN / CLOSE pp. 20 / Bold ltalic: VCR and DVD Functions I Normal: Others VCR/TV p. 21 FF "_ 22 TV mode p. 28 POWER FTRACKING NUMBER pp. 4, 21, 22 keys ADD/DELETE pp. CHANNEL • / _r / / V-LOCK/P-IO VOLUME + p, / 28 MENU / PLA Y LIST / CLEAR -- p. 36, 43 19, 39 ACTION -pp. 18, 52 _NU SELECT • V
Bold: Italic: Bold ltalic: Normal: VCR Function DVD Function VCR and DVD Functions Others If the disc cannot be removed... First, unplug DECK. Then, prepare a rigid wire (e.g. an extended paper clip) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc. PLAY p. 20 STOP/EJECT p.
Bold: VCR Function Bold ltafic: VCR and DVD Functions VHF/UHF Antenna p.12 AC Power Plug • While plugged into an AC outlet, this DECK consumes 0.85 W of electrical power in off mode. VHF/UHF Antenna p. 12 Component Video Output Connector (Y, P_, PR) (DVD Only) p. 13 S-Video Out Connector (DVD Only) pp. 10, 13 Audio Output2 Connector (L/R) p. 13 Input Terminal Video Input Connector p. 35 Audio Input Connector (L/R) p. 35 table shows the status of the output jacks when in VCR or DVD mode.
n'oTill=I,_ _i• Function e]_'J_llt & Channel CH 0 8 v[_]-'t== Displays When a function button Blank Tape/No Indications Video Signal Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with Weak Signal Display Feature (p. 33) set to OFF, the TV screen will turn solid blue. is pressed, e.g. PLAY, or you change channels, a 5-second display appears.
• If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher quality picture and sound. • You can enjoy stereo sound even if your TV is not stereo by connecting a stereo amplifier to DECK. • Connect DECK and TV with an RF Coaxia( CaMe _ (not supplied) as shown in the figure below. • DSS Receiver ,kDECK ,FTV • (supplied) or an AV Cable @ • DECK,_TV Cable Box _, DECK ._ TV Antenna or Cable Disconnect antenna or cable from TV and connect to DECK.
• With a Cable Box (DECK,_Cable Box_TV) • viewany • record scrambled channels. (including D VD/VCR DECK TV scrambled) channel. • use Remote Control to select channels without using Multi-brand control feature. • Connect With Two Cable Boxes D VD/VCR DECK rANT7 I or ICable B_;X TV record and view both scrambled and unscrambled channels if additional equipment is added. This connection • view a channel other than the one selected for any type of recording.
F_*Tr_ It_J[_ _' [] Ready Checklist Turn down the volume, then turn DECK, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables.
• Connecting Amplifier (5.1 ch Surround system) [Digital connection] DECK,I, Dolby Digital Decoder,l, Amplifier,l, Speaker or DECK,I, DTS (Digital Theater Systems) Decoder ,_Amplifier ,l,Speaker When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK OPTICAL digital audio output connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality audio in your home.
1 2 Turn TV on. See connections (_) RF Coaxial Cable Connection and (_)AV Cable Connection on page 12. Set TV to channel 3. Set TV to VIDEO. 3 [DECK + TV] • Go to "initial Setup (Ready to Play)." (See below.) [Cable Box --,- DECK ÷ TV], [DSS ÷ DECK ÷ TV] • Turn on Cable Box and set it to your Public Broadcasting in your time zone. Station (PBS) channel • If you use a DSS Receiver, it must be turned off. Press VCR on remote for VCR mode.
Settings are madethis automatically. When complete, screen appears. EJECT SETTING G®® AUTO i @@O@J : DST:ON CH 10 CLOCK SET COMPLETED If "AUTO CLOCK SET IS INCOMPLETE" appears, manually set clock (below). ACTION SELECT AV< I_ SET VCR AUTO CLOCK SET IS INCOMPLETE PLEASE SET CLOCK BY PRESSING ACTION KEY If Auto Clock Set was incomplete. Press CLOCKACTION* screen. on remote to display SET CLOCK \1/ II, If" DST:ON /I \ SELECT END STOP/EJECT :i • :ACTION SET:SET Press select the month S
1 m _ELECT EXIT 2 • Press ACTION* to display MENU. MENU • SET UP CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR'S OUTPUT CH:3 : AV : ACTION • PROGRAM functions are not available when using COMPONENT Video Output and S-VIDEO OUT, Please set TV to either RF INPUT or VIDEO INPUT, and then press PROGRAM. SET:SET • Language 1) Press A_ +to select language item. Channels • 1) Press AV to select "SET UP CHANNEL," and press SET.
*Important: • Time Zone Adjust • 1 ) Press AV to select "SET CLOCK," and press SET. UP MENU VCR _ITIIUI_II_ NEL IDIOMA/LANGUE : ENGLISH VCR'S CH:3 OUTPUT SELECT EXIT :• • : ACTION SET MENU UP VCR SET SET UP UP ADD/DLT ACTION SELECT Iv_i • SET VCR : ENGLISH SET:SET SELECT:IV EXIT SET:SET : ACTION 2) Press SET. II;II II l'll'l lit lit 11 SET To add channel: • EXIT QQ_ CLOCK CHANNEL IDIOMA/LANGUE MANUAL SELECT CHi/T 1) Press AV to select "VCR'S OUTPUT CH.," and press SET.
E_ [] [] [] [] Ready Checklist EJECT VCR/TV Atl connections are made. (pp. 12 ~ 15) TV and DECK are plugged in. TV is on and tuned to CH 3, 4, or VIDEO. Remote is in VCR mode. (Press VCR.) F_10 Q (_ C) CHAIr ®G® 1 Insert @©O@ a tape. • DECK power comes on. If Auto VCR/TV (see p. 32) is set to "OFF," press VCR/TV on the remote for VCR mode. j 0.@. i VCR_ FF/ Press PLAY* to play a tape. • If tape has no rec. tab (p. 6), auto play begins.
Insert a tape with a record This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use tapes with the _ mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended. tab (p. 6). • DECK power comes on. If Auto VCR/TV (see p. 32) is set to "OFF," press VCR/TV on the remote for VCR mode. Press AT,channel. or NUMBER to selectCHthe keys • If channel number is over 100, first press 100 key then the other 2 digits.
[_ [] [] [] Ready Checklist Press All connections are made. (pp. 12 ~ 15) DECK is plugged in. If DECK is connected to an audio amplifier, turn the stereo system's power on. POWER* or DECK. Press OVOis already to select inserted, DVD mode. If a disc go to step 4. (Depending on the disc, playback may start automatically.) Press OPEN/CLOSE, and then place a disc into the disc tray. OPEN/ CLOSE only (p. 6) with printed side up and use guides li]) to place into tray.
• Forward/Reverse Scene Search Iv_¢"W',-L , . Press FF/SLOW+ or REW/SLOWduring play. Press PLAY to release. • Search speed, slow at first, increases with each additional press of the button up to 5 levels, • Forward/Reverse Chapter/Track Skip Press SKIP+IH_I or SKIP- I_1_ during play. Each press skips a chapter (DVD-Video), track (DVD-Audio/CD) or Program/Play List/ Marker (DVD-RAM).
[_ [] [] [] [] [] [] Ready Checklist All connections are made. (pp. 12 - 15) TV and DECK are plugged in. Clock set correctly• (p. 18) Tape has record tab intact. (p. 6) Remote is in VCR mode• (Press VCR.) Sufficient tape remaining for recording time• POWER ®@@ i Press PROG* to display Program. 1) Press I_. 2) Set record DATE, press &v to select: 1-31= one time, or DAILY=Monday-Friday, or WEEKLY= same time each week. • See selection order left. EXalT( _j_e_ Today DAILY I 13 SELECTS.
Review, Replace or Clear Program Contents: (Recording is not in progress) Press PROG to display Program [_ls To cancel a Timer -- Recording in progress...- List. 2:00p 3:20p02 sLP1 Press A, Hold down STOP in VCR mode for a few seconds to cancel the Timer Recording. CANCEL 14 SELECT : ADD/DLT 7:00p:& EXIT 10 •7:30p SET:SET SP/ to select number. : PROG (The "TIMER" Indicator goes on Multi Function Display.) out • Any future daily or weekly recording will be performed as programmed.
Connection Make the Audio/Video Connection as shown on pp. 12 - 15. • You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV. The following are possible audio broadcast types and onscreen displays. The signal being received is indicated with a "[c_"mark while the selected audio mode is indicated with an arrow. 7>-IO To display the broadcast signal being received, -_ press DISPLAY*.
Press AUDIO (SAP/Hi-Fi) to display audio mode. (Display disappears after 5 seconds.) Press AUDIO (SAP/Hi-Fi) to select desired mode. ((STEREO repeatedly • Refer to "Receivable Broadcast • Arrow indicates selection. Types" on p. 26. Make a recording. See p. 21. // Start playback. See p. 20. Press AUDIO (SAP/Hi-Fi) to display audio mode. 3 HIFI:L/R HIFI:L HIFI:R NORMAL • Press AUDIO (SAP/Hi-Fi) to select desired mode.
The Remote Control can be set to control some TVs. Find your page. TV Brand Code Number on the following • Set up for TV control, ÷ hold down TV button, ÷ enter code with NUMBER keys. Confirm code entry, ,- press POWER to turn selected unit on or off. • See table below for controllable functions in each mode. O • Repeat setup after remote battery replacement. • Remote will not control every TV made by the manufacturer listed. If you get no response, your particular unit cannot be controlled.
Toshiba ................................................... Sanye ...................................................... Fisher ...................................................... JVC ......................................................... Hitachi ..................................................... Mitsubishi .......................................... 07, Samsung ................................................ Gold Star .................................... 15, 16, Panasonic ........................
Search System For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings, These marks are used to access or scan recordings. To quickly return to a specified tape location. Press DISPLAY to display Counter.during play I r'_ 1'_ [,._ Press COUNTER RESET on remote at desired position to reset to "0:00:00". .................. .....................
o O" " " o0" Select your tape length so the tape position and amount of tape remaining are properly displayed. (See "Tape Position Display" section right.) Press ACTION to display MENU. SET SET UP UP CLOCK CHANNEL ID[OMA/LANGUE VCR'S OUTPUT SELECT : ENGLISH CH:3 :• • EXIT SET Press AV to select "SET UP VCR," and press SET. : SET L END SELECT:&:ACTEON • :OFF :ON :OFF :ON :ON r SET:SET • I 0 . To find out the present tape position and amount of tape remaining.
The VCR/TV selection can be set to auto or manual. Press ACTION* to display MENU. MENU SET UP CLOCK SET UP CHANNEL ID_OMA/LANGt_E : £NGL_SH VCR'S OUTPUT CH:3 SELECT : A'I" SET: SET l ........ ,o. / Press At' to select "SET UP VCR," and press SET. Press ,kV to select and "AUTO VCR/TV," press SET to set "ON" or "OFF." • OFF(Manual): You select "VCR" or "TV" mode using the VCR/TV button on the remote. • ON(Auto): "VCR" mode is automatically set when VCR is turned on, or in Pray mode.
When "ON," picture is displayed regardless of signal strength. Press ACTION to display MENU. 2[ SET UP VCR .... SET UP CLOCK VCR'S OUTPUT SELECT:&V D]OMA/LANGUE EXIT :ACTION 1 to Press selectAV"SET U P CH:3 SET:SET : ENGLISH _N_EATChE, [E. press SET. CHANNEL," and to select "WEAK SIGNAL DISPLAY," and ................... Press AT press SET ............................... to set "ON" or "OFF." • ON: Picture is displayed regardless of signal condition, and may not always be clearly visible.
. . • - . • . o . *Important: If Multi-brand feature is used (p. 28), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV mode. If a remote control button does button not work when pressed, press the VCR on the remote and try the button again. Press ACTION* to display MENU. SET UP CHANNEL ]D[OMNLANGUE 2 VCR'S SELECT EXIT : ENGUSH .... OUTPUT :• • : ACTION CH:3 SET Press Av to select "SET UP VCR," and press SET. r_l e ®® GO@® : SET ® .......
Connection VCR/ _mlcorder D VD/VCR IHi_Pd DECK TV Front of DECK O O O VIOE01N2L-AUDI0LN2-R (Audio/Video In Terminals on the front of DECK are available) O Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as shown. (_) Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R" AUDIO IN terminals on DECK. In place of Playing VCR, you can use other equipment, such as a Camcorder.
I_ Ready Checklist [] Please read "Basic DVD Operation" on page 22. [Subtitle language] [Audio sound track language] You can select a different subtitle language (if offered) than the one set at the Settings for DVD Operation. (See p. 52.) 1 Press SUB TITLE* in Play mode to display the subtitle selection on-screen. ENG FRA DEU ITA ESP NLD SVE NOR DAN POR RUS JPN CHI KOR MAL VIE THA _,_ • Display disappears after 5 seconds.
When L_) appears on the screen while a button is being operated, it means that the corresponding operation is prohibited by DECK or the disc. , - , , - - I | • DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles. You can view these angles, if available, using the ANGLE button. _in ........................................................... Press ANGLE angle selection on-screen.
IIIt! _ hVA _3111[!._vJI] _31_] Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) Press TITLE* in Play mode to display the title screen. 2 TITLE MENU Birds of the world Press AV_I • or NUMBER keys to select a title, and press SET or PLAY to start playing. NUMBER keys • "Pressing SETor PLAY" is not necessary when using NUMBER keys.
• • o • o • You can program _ [_11' Ready • specific tracks and order of play. Press ACTION to display DVD MAiN [] [] Checklist DECK is in DVD mode, press DVD. CD is inserted. MENU. Press A'9" to select "PLAY MODE," and press SET to display. Do operation at left on this steps page. Press DISPLAYto Information screen. (Disc Information pLAY 4 5 Press ,LV to select "PROGRAM PLAY," and press SETto display.
I_1_ Ready Checklist [] Tracks are played in a random order. DECK is in DUD mode, press DUD. Press ACTION* to display DVD MAIN MENU. 2 D[SC LANGUAGES AUDIO OUTPUT T STILL DUD MAIN :AUTO MENU MODE V MODE :4:3 Pan&Scan ULl'I,_Eell SELECT iPROGRE_SIVE SET END :A • OUT:OFF :SET :AGT[ON PLAY pROGRAM SELECT SET END j Press &V to select "PLAY MODE," and press SET to display. F_lO ©@® NUMBER keys @®©@J CLEAR A C TION Press &V to select "RANDOM PLAY," and press SET to begin random play.
DVD-Audio Operation (DVD-Audio only) This DECK, equipped with a 192 kHz/24 bit Audio D/A converter, supports DVD-Aud)o recorded with high quality sound, The DVD-Audio feature includes "Still Image Skip" and "Bonus Group Playback" functions. (See below.) Please refer to "Basic DVD Operation" on pages 22 and 23. DVD-Audio still images (onty if contained) can be skipped over. Press PAGE in Play or Pause mode to display the still image and page number. Each press of PAGE changes page number as shown below.
You can enjoy playing your personally recorded/edited • This DECK was designed for playback 1 Do steps only. DVD-RAM DVD-RAM discs on this DECK. recording is not possible. 1 ~ 3 on page 22. • Play begins from the first program title recorded the DVD-RAM. on Press D.NAVI*or PLAYLISTto display Navigator or Play List menu for easy title Direct or scene selection. • See below for "Direct Navigator" or next page for "Play List information". Press STOP to stop playing.
If the DVD-RAM features a Play List, your preselected list of favorite scenes is displayed for easy access, (Operation can vary according to how you edited the DVD-RAM.) Press PLAY mode LIST to display the Play List menu. in Play/Stop 2 Press 4 • to select select Then, a title press a page and press (Play List No.). SETor PLAYto &V Play List No. Established time length 'age No. to start playing. • "Pressing SET or PLAY" is not necessary using NUMBER keys.
When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and DECK information (repeat play, play mode). Press DISPLAY* in Play or Stop to display "On-Screen Displays." I_ [] Ready Checklist DECK is in DVD mode, press DVD. mode • Each press of DISPLAY changes the on-screen display as follows. (Refer to pp. 44 ~ 48.
• Disc information 1. TITLE screen (for DVD-Video) No. Go directly to a preset title number. • Select "TITLE", and press SET. • Change the No. by pressing &V or NUMBER keys, and press SET. 2, CHAPTER No, Go directly to a preset chapter number. • Setect "CHAPTER", and press SE'K • Change the No. by pressing ,_1!' or NUMBER keys, and press SET. • This function does not work with some discs. 3. Disc currently being played The type of disc currently inserted is displayed.
• Disc information screen (for CD) 1. TRACK No. Go directly to a preset track number. • Select "TRACK", and press SET*. • Change the No. by pressingAV or NUMBER keys, and press SET 2. Disc currently being played The type of disc currently inserted is displayed. 3. Elapsed playing time • Disc information screen (for DVD-RAM) A. Direct Navigation (PROGRAM) or PLAY LIST No. Go directly to a preset title number. *Select "PROGRAM" or "PLAY LIST", and press SET • Change the No.
• DECK information screen (for DECK) 1. Operating mode The current operation is displayed. 2. Repeat Play mode (see p. 48) Repeat play mode can be selected. : DisPt Ay / • Select "REPEAT", and press SET. • Change the desired mode during play by pressing &Y, and press SET. Repeat Play mode IDVD-Video CHAPTER TITLE OFF (NORMAL) IbVD-Audio TRACK GROUP OFF (NORMAL) (PROGRAM) PROGRAM DISC OFF (NORMAL) (PLAY LIST) PLAY LIST ALL PLAY LIST OFF (NORMAL) DISC OFF (NORMAL) DVD-RAM CD TRACK 3.
Repeat Play mode example (see p. 47) • CHAPTER/TITLE REPEAT PLAY (DVD-Video) CURRENT PLAYBACK POSITION 1 TITLE chapter CHAPTER REPEAT TITLE REPEAT NORMAL PLAY chapter _ _ --- =t_,S 0E chapter '7 --_ r>..10 @(9@ track track TRACKREPEAT GROUPREPEAT @@0@ track track track "--_-- 0 ............ 0 _----_'_----_ CURRENT TRACK REPEAT PLAYBACK POSITION ...................
This unit can play MP3/WMA/JPEG format CD-R or CD-RW recorded for personal use on a PC, etc. Some discs may not play due to the condition of the recording. Press POWER* on the remote Press OPEN/CLOSE, then place an MP3/WMA/JPEG the disc tray. Press OPEN/CLOSE to close. or DECK. disc into _3T_T 1 [] a b .;_:WMA file C3:Folder file _:Parent _:JPEG Press • • _END " ', I ;DO CUBIC _._NOOTURNE WALTZ _QTECHNO _ ]] POPS • Only File (not Folder) area operation is possible.
_lJ"-]=[_ I "-]_ • ;_'_ ,'t You can play back JPEG images. Displayable Image Size: 32x32~7680x7680 pixels Select PLAY MODE [JPEG Slide-show] (During STOP mode) Press • • to select the desired PLAY MODE (See below). "PLAY MODE] Oo Some JPEG format back. may not be played NORMAL: All JPEG files are selected and Do steps 1-3 on page 49. played back one time only. Press AT to select a JPEG file (1_). Press SETor PLAY. Selected JPEG file is displayed.
PJ;J:_ lr4r_;TT;t (During JPEG Playback.) You can enlarge specific portions of a JPEG picture and select the zoom ratio using the ZOOM button on the remote during JPEG Playback screen. Set Zoom size. F>_lO Press ZOOM repeatedly to change display as follows. m Press ,9TOP to return the MP3/WMA/JPEG MENU. @@@®, SELECT ® ACTION • You can enlarge the center portion of the image to one of 2 magnifications. • Operation can be done during Rotation (below). X 1.
Press ACTION* to display DVD MAIN MENU. ovo_,,_.M_u ................. Press ,iV an item, and to select press SET Once initial settings are done, they remain in memory (even after power is turned off) until changed. This means DECK will operate under the same conditions (especially DVDs) each time. E_ [] DISC LANGUAGES (See below) All languages offered on the disc can be set. If a language not offered is set, the original disc language will be selected. AUDIO OUTPUT (See p. 53.
_1_ Select the digital output to be output from the optical digital audio output connector of DECK. Ready Checklist DECK is in DVD mode, press DVD. Type of amplifier to be connected Press ACTION to display DVD MAIN MENU. 2 [] Press A_F to select "AUDIO OUTPUT," and press SET to display screen. :Bi ..........
Set to reduce jitter in a displayed still picture or a motion picture. Press ACTION* to display DVD MAIN MENU. 2 Press AV to select "STILL MODE," and press SET repeatedly for mode. (See below.) AUTO: "FIELD" (Field still) or "FRAME" (Frame still) is automatically selected during the still mode. (Factory preset) FIELD: "FIELD" (Field still) is always selected. This setting will reduce jitter when compared with "AUTO" on some discs. F>..I_ @@® @@0@ j AC_ON SELECT AT,_ SET ....® ® .....
O Sets the Component Video Output Connector (p. 10, 13) to output the Progressive scan signal. Press ACTION to display DVD MAIN MENU. 2 OFF: ON: Press AV to select "PROGRESSIVE OUT," and press SET repeatedly for mode. (See below.) Progressive Progressive Component scan signal is not output. scan signal is output from the Video Output Connector. Press ACTION to exit this mode. • If the television is not progressive compatible, a progressive scan picture is not available.
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" "MENUS" (see p. 52).
These displays will alert you to a missed operation or provide further instructions. PLEASE SET CLOCK BY PRESSING ACTION KEY If you attempt to set or review a Timer Recording and the Clock is not set... PLEASE PREPARE FOR TIMER REC If the DECK is not in Stop mode, or cassette is not inserted, or cassette has no record tab, or tape is at its end 2 minutes before a Timer Recording is about to begin...
Check the foflowing points if you are having troubb with your DECK. No power,,, Completely insert Power Pbg into an AC outlet. Press POWER button on. Make sure power source is active. Power turns itself off,.. Auto power-off (shutoff) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in TV or Playback mode. Turn the power beck on. (pp. 23, 33) ! TV program Check connections between DECK, external antenna, and TV.
mlvj mTL_] m] (.,.".)_J _ Play fails to start even when PLAY is pressed... • This DECK cannot play discs other than DVDs and CDs. • The disc may be dirty and require cleaning. Picture is distorted during rapid advance or rapid reverse... No Forward/Reverse Scene Search • The picture will be somewhat this is normal. play... Audio soundtrack and/or subtitle language is not the one selected at the initial settings... No subtitles...
A ACTION button ................................. 8, 18 Accessories ............................................ 4 ADD/DELETE button (Add or Delete a Channel) ............ 8, 19 Audio Broadcast types (Stereo/SAP/Mono) ............................ 26 Audio Mode (Playback, Recording) .... 27 Auto Operation Functions .................... 31 Auto Shut-Off ........................................ 33 B Batteries ................................................. 4 Blue Light (ON/OFF Feature) ...........
A ACTION button ................................. 8, 52 ANGLE button (Multiple Angle Viewing) ......... 8, 37, 51 AUDIO button (Audio Soundtrack Language) ...... 8, 36 Audio Output (For Selecting Audio Output) ............. 53 Auto-Power Off Function ..................... 23 A/V OPTIMIZER .................................... 55 B Bonus Group (For DVD-Audio) ........... 41 C CLEAR button .................................. 8, 39 Component Video Output .............. 10, 13 D Direct Navigator ...............
Panasonic Broadcast & Digital Panasonic Broadcast Division of Matsushita Systems Company & Television Systems Company Electric Corporation of America Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 Eastern Zone: One Panasonic NJ 07094 (201) 348-7621 Way 4E-7, Secaucus, Central Region: 1707 N Randall Road El-C-l, Western Zone: 3330 Cahuenga Elgin, Blvd W, Los Angeles, IL 80123 (847) 468-5200 CA 90068 (323) 438-3500 Government Marketing Department: 52 West Gude Driv