Operating instructions

20
Check that a video cassette with its tab intact has
been inserted.
Set the MENU/REC LOCK switch to MENU to
display the menu screens. Press the page button
to display the alarm recording setting screen (Menu
Screen 3) on the TV monitor.
Press the set (+ or –) button to display 3H or 6H for
MODE.
Alarm Recording (Emergency Recording)
Alarm recording operation
If TAPE END on Menu Screen 4 has been set to REPEAT, the auto repeat recording mode is established when
the tape comes to the end.
With emergency recording, set the unit to the STANDBY or STOP mode.
•
•
1
2
3
Press the shift ( ) button to move the flashing to
DURATION.
Press the set (+ or –) button to set the recording
duration.
Upon completion of the settings, set the MENU/
REC LOCK switch to OFF. The regular screen is
restored.
Press the REC button.
If an alarm input signal is subsequently supplied,
the time mode set by T-MODE changes to 3H or
6H, and alarm recording continues until the alarm
is released.
4
5
6
The time when the alarm signal was input can be ascertained on the TV monitor by checking the alarm input
time in the RECALL item on Menu Screen 3.
Alarm Recall
The alarm recall function stores up to 4 alarm input times in the memory and displays them on the screen. If
there have been more than 4 inputs, they will be deleted from the screen in sequence starting with the oldest
data.
When the RESET button is pressed while Menu Screen 3 is on the display, the alarm recall memory can be
cleared.
•
•
Set the MENU/REC LOCK switch to MENU to
display the menu screens. Press the page button
to display the alarm recording setting screen (Menu
Screen 3) on the TV monitor.
1
Upon completion of the settings, set the MENU/
REC LOCK switch to OFF. The regular screen is
restored.
2
[ALARM] P3
MODE : ALARM
DURATION : 30SEC
[RECALL] 10-10-01 20:19
14- 9-01 12:05
30- 8-01 08:40
25- 6-01 04:14
[OUTPUT SELECT]
TERMINAL OUT : ERR WARN
MODE 3H
[ALARM] P3
MODE : OFF
DURATION : 30SEC
[RECALL] -
-
-