User manual

3.1.6 GT01 and GT11 Installation Method
Secure the GT to the installation panel using the four fittings and four screws provided with the unit.
1. Place the GT in the installation panel.
2. Insert the fittings into the grooves provided in the GT, and tighten the screws to secure the GT
to the installation panel.
The screw tightening torque should be 0.1 to 0.25 N· m, and tighten them uniformly.
Tightening the screws too hard can cause deformation of the front panel, so that the touch switches will
not function properly. Install the GT within the above range.
3.1.7 GT21 Installation Method
Secure the GT21 to the installation panel using the two fittings and four screws provided with the unit.
1. Place the GT21 main unit in the installation panel.
2. Insert the fittings into the grooves provided in the GT21 main unit, and tighten the screws to
secure the GT21 main unit to the installation panel.
The screw tightening torque should be 0.1 to 0.25 N· m, and tighten them uniformly.
Tightening the screws too hard can cause deformation of the front panel, so that the touch switches will
not function properly. Install the GT within the above range.
3-6