Panasonic Broadcast AJ-HPM100p Menu Information
Setup Unit Setup The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU. The SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five user files (USER1 to USER5) can be saved.
Changing Settings The menus on the LCD monitor or a monitor (when the SUPER switch on the right side of the LCD monitor is set to “ON”) connected to the ANALOG COMPOSITE MONITOR OUT connector make it possible to change settings. Change Operations 3 Select items to change. Turn the search dial or press the up (▲) or down (▼) 4,5 buttons to move the cursor (*) to the item you want to • Use the search dial in JOG mode. • Turn the dial clockwise to increment item numbers Setup change.
following operation to change setting values. Making changes using the PF buttons ➝For details on how to assign items to the PF button, refer to “Setup menu No. A04 to A06 (PF1 ASSIGN to PF3 ASSIGN).” 1 Press the PF (EXIT) button. Registered items appear on the LCD monitor. 2 Press the PF button (1 to 3) required to bring up the item to change. Each press of the button updates the setting value. 3 Press the PF (EXIT) button to end changing settings.
Item Settings SYSTEM The system menu specifies analog component (HD) output, analog composite output, phase adjustment of audio output, system frequency, phase of SD REF input of HD output, and system file lock. * An underlined setting indicates an initial value. Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 –1375 | | steps). 1375 0 –: Advances the phase. | | +: Delays the phase.
Item Setting FR SUPER FR SUPER No. DISP. No. DISP. Settings and brief function description 0000 0H Specifies whether or not HD output should advance 90H phase relative to SD REF input 0001 90H during SD REF input. 0: Outputs HD at the same phase as SD REF. 26 1: HD output is output at a phase that is 90H advanced relative to SD REF. HD SYS H ADV NOTE: • The audio output and TC output are output in the same phase as HD output. • At 720p, the phase difference is 120H.
BASIC This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12 and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and other displays, sets recording formats, sets the formats that can be added to the play list and sets the time of the internal clock. * An underlined setting indicates an initial value. Item Setting FR SUPER FR SUPER No. DISP. No. DISP.
Item Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 0 Specifies the vertical character position output via the VIDEO MON connector or displayed | | in the superimposed display of the LCD panel. 0020 20 008 009 CHARA V-POS CHARA TYPE | | 0022 22 0000 WHITE Specifies the display type output via the VIDEO MON connector or in the superimposed 0001 W/OUT display, SETUP-MENU and other LCD panel displays.
Item Setting FR SUPER FR SUPER No. DISP. No. DISP. 0000 2000 | | 0030 2030 0001 JAN | | 0012 DEC Settings and brief function description Subscreen 00 01 YEAR MONTH Sets the year. Sets the month. NOTE: Setting a nonexistent day for February, April, June, September and November will automatically set the equivalent day in the following month. 02 DAY 0001 1 Sets the day.
Time difference ◆ NOTE: City/Region –02:30 • The clock is accurate to within about ±30 seconds a month with the –02:00 Central Atlantic time power off. • When the precise time is required, check and reset the time while –01:30 –01:00 the power is on. Azores –00:30 OPERATION This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed of FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.
Item Setting FR SUPER FR SUPER No. DISP. No. DISP. Settings and brief function description 0000 OFF 0001 TYPE1 the Recording Marks in the HD SDI input signals from Panasonic camera-recorders. 0002 TYPE2 0: No automatic recording/stopping Select whether recording and stopping should be performed automatically according to 1: Recording and stopping is performed automatically according to the Recording Marks in the LTC information attached to HD SDI signals.
Panasonic camera-recorders, recording formats and Recording Mark Model Recording format Recording Mark TYPE AJ-HDC27F,H 720/**p over 60p TYPE1 AJ-HDX400P 1080/59.94i –––– *1 Provides switching between TYPE1 and TYPE2. 1080/50i –––– *1 For operating details, see respective operating 1080/25p over 50i –––– *1 720/59.94p TYPE1 720/23.98p over 59.94p TYPE1 720/23.97p over 59.94p TYPE1 AJ-HDX400E AJ-HDX900 1080/59.94i –––– *1 1080/23.98p over 59.94i TYPE2 1080/23.97p over 59.
TIME CODE This menu sets the time code. * An underlined setting indicates an initial value. Item Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 BLANK Specifies whether or not a VITC signal will be output at the positions selected in menu No. 0001 THRU 501 VITC POS-1 and No. 502 VITC POS-2 during playback. 0: VITC signals are not output. 500 1: VITC signals are output.
Item Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 000 Specifies user bit usage in time code generated by the TCG.
Definition of terms: SBC (Sub Code Data) area: This area, which is separate from video and audio data area on a P2 card, stores SMPTE/ EBU compliant time code, recording dates and other information. VAUX (Video Auxiliary Data) area: An area in the video data area on a P2 card that stores additional information on video data. VIDEO This menu is used for video settings. * An underlined setting indicates an initial value. Setting SUPER FR SUPER No. DISP. No. DISP.
Item Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 CMPNT 650 STYLE 0001 CMPST 0: Level adjustment mode for the component style Sets the level adjustment mode. 1: Level adjustment mode for the composite style 651 0000 Pb-Pr Specifies the rotational axis of chroma phase adjustment. 0001 U-V 0: Rotates in a perfect circle in an SDI (component style) vectorscope. 1: Rotates in a perfect circle in an analog (composite style) vectorscope.
Setting SUPER FR SUPER No. DISP. No. DISP. 0000 0.0% | | 1000 100.0% | | 1413 141.3% 0000 –31.0 | | 0062 0.0 | | 0124 31.0 0050 –10.0% | | 0150 0.0% | | 0250 +10.0% 663 664 665 C LEVEL HUE/C PHASE SETUP/BK LVL 0000 0001 669 THRU Settings and brief function description Adjusts the chroma level (– ∞ to 0 dB to +3 dB). NOTE: • This setting is available when CMPST is set in menu No. 650 STYLE. • Chroma level adjustment is available only for output.
Item Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 OFF Specifies whether or not EDH is superimposed on serial output signals. 684 EDH(SD) 0001 ON 0: Signals are not superimposed. 0000 OFF 0001 AUTO 1: Signals are superimposed. 685 Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit. 0: ESR is forcibly set to off. 1: ESR is automatically turned on and off depending on operating mode.
AUDIO This menu is used for audio settings. * An underlined setting indicates an initial value. Setting SUPER FR SUPER No. DISP. No. DISP.
Item Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 CH1 Specifies the input signal to be recorded on the audio CH3. 0001 CH2 0: Audio input CH1 signal 0002 CH3 1: Audio input CH2 signal 0003 CH4 2: Audio input CH3 signal 0004 CH1+2 3: Audio input CH4 signal 0005 CH3+4 4: Mixed audio input CH1 and CH2 signal 0000 CH1 Specifies the input signal to be recorded on the audio CH4.
Item Setting FR SUPER FR SUPER No. DISP. No. DISP. 0000 OFF 0001 ON 793 Settings and brief function description Specifies whether or not the playback sound be mixed in the voice-over. 0: Playback sound is not mixed. 1: The input and playback sound are mixed in the recording. A DUB PB MIX NOTE: Press the STOP or SET button to open the subscreen to select the channels that will be mixed. To exit the subscreen, press the STOP or SET button again.
Item Setting Settings and brief function description FR SUPER FR SUPER No. DISP. No. DISP. 0000 DFLT 0001 1 | | 0255 255 0000 CH1+2 Specifies the output channels when the audio signals are in 4-channel mode and output in 0001 CH3+4 the DVCPRO (25 Mbps) format and a DV clip is played back. 886 890 DIF CONFIG DIF AUD OUT Specifies the extension menu. Normally, DFLT is used. 0: CH1 and CH2 1: CH3 and CH4 MENU This menu is used for menu settings.