Menu Information

90
Setup: Unit Setup
Setup
Unit Setup
The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU. The
SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five user
files (USER1 to USER5) can be saved.
This unit can possess up to five user files, each of which can
be selected from a menu setting.
Setting values can be changed as necessary.
➝For details on change operations, refer to “Changing
Settings” on the next page.
After a change, the content of USER1 can be saved (copied)
to USER2 to USER5.
➝For details, refer to “Setup menu No. A01 (SAVE).”
You can specify the user setting files that will be loaded in
USER1 at power up. You can also decide to use the same
settings as last time.
➝For details, refer to “Setup menu No. A02 (P.ON LOAD).”
System Basic
USER1 USER2 USER3 USER4 USER5
Operation Interface TimeCode Video Audio DIF Menu
User settings file
System
file
SHIFT+FF
SHIFT+FF SHIFT+FF
SHIFT+FF
SHIFT+FF
SHIFT+REW SHIFT+REW
SHIFT+REW
SHIFT+REW SHIFT+REW
Automatic Loading of User Setting File at
Power up