Panasonic Broadcast AJ-HPX3700 Menu Information
AJ-HPX3700G-VQT1V68_eng.book 166 ページ 2008年10月15日 水曜日 午後6時38分 Menu Menu Configuration MENU USER MENU SYSTEM SETTING MAIN MENU PAINT OPTION MENU OPTION RB GAIN CONTROL RGB BLACK CONTROL MATRIX COLOR CORRECTION LOW SETTING MID SETTING HIGH SETTING ADDITIONAL DTL SKIN TONE DTL KNEE/LEVEL GAMMA CAMERA SETTING VF CAM OPERATION Opening the Menus CAMERA ID SHUTTER SPEED SHUTTER SELECT USER SW SW MODE WHITE BALANCE MODE LENS/IRIS MAIN OPERATION USER MENU: Displayed when the MENU button is pressed.
AJ-HPX3700G-VQT1V68_eng.book 167 ページ 2008年10月15日 水曜日 午後6時38分 USER MENU:USER MENU is factory-set. The menu can be configured to suit your preferences by specifying each option according to your purposes and frequency of use, through the screen, which is accessible from the MAIN MENU page. For more information, see [Selecting Options for USER MENU] (page 169). To display USER MENU, press the MENU button. a MAIN MENU: Allows you to set all options on the settings menu.
AJ-HPX3700G-VQT1V68_eng.book 168 ページ 2008年10月15日 水曜日 午後6時38分 Setting Menu Options The menu options are set with the MENU and jog dial buttons. The menu comprises main menu, sub-menus and options menus. The data specified through menu options are written and saved in the internal memory of the unit. This section describes how to set options in MAIN MENU. The other menus can be configured in the same manner (the method of displaying the menu screen depends on the particular menu).
AJ-HPX3700G-VQT1V68_eng.book 169 ページ 2008年10月15日 水曜日 午後6時38分 6 7 8 Press the jog dial button. The value stops blinking and is accepted. To change the settings for other options on the same page, repeat steps 4 - 6. When the settings are finalized, press the MENU button. This terminates the menu option setting mode and returns the unit to normal operation mode. Selecting Options for USER MENU Go to the USER MENU SELECT page from MAIN MENU.
AJ-HPX3700G-VQT1V68_eng.book 170 ページ 2008年10月15日 水曜日 午後6時38分 Menu Description Tables SYSTEM SETTING The ____ in the Adjustable Range column indicates the preset mode. SYSTEM MODE Items/ Adjustable Data Saved Range SYSTEM MODE 1080-59.94i 1080-23.98PsF 1080-24PsF 1080-50i Remarks For setting the system frequency. When this item is switched, turn off the POWER switch on the unit and then turn it on again. Notes When USB DEVICE mode is selected, no change can be made to this option.
AJ-HPX3700G-VQT1V68_eng.book 171 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range USR SW F.RATE (1080-59.94i, 1080-23.98PsF, 1080-24PsF) 1FRAME : 24FRAME : 30FRAME (1080-50i) 1FRAME : 25FRAME Remarks When the FRATE function has been assigned to a user button, the starting frame rate under VFR operation is set.
AJ-HPX3700G-VQT1V68_eng.book 172 ページ 2008年10月15日 水曜日 午後6時38分 REC FUNCTION Items/ Adjustable Data Saved Range INTERVAL REC ON MODE ONE SHOT OFF Remarks Sets INTERVAL REC function. ON: Uses internal memory to perform interval recording. ONE SHOT: Performs “one-shot” recording for the duration specified under REC TIME, and then stops. OFF: INTERVAL REC is not performed. Note This item cannot be changed when “ON” is selected in LOOP REC MODE.
AJ-HPX3700G-VQT1V68_eng.book 173 ページ 2008年10月15日 水曜日 午後6時38分 OUTPUT SEL Items/ Adjustable Data Saved Range SIGNAL FORMAT 4:2:2 4:4:4 Remarks Select the signal that is output from the HD SDI A · B connectors. 4:2:2: YPBPR 4:2:2 format is selected. 4:4:4: RGB 4:4:4 format is selected. LINK A will be output from the HD SDI A connector, and LINK B from the HD SDI B connector. Items/ Adjustable Data Saved Range MONITOR OUT VBS HD SDI Select the output signal on the MON OUT connector.
AJ-HPX3700G-VQT1V68_eng.book 174 ページ 2008年10月15日 水曜日 午後6時38分 HD SDI A · B OUT MARKER Items/ Adjustable Data Saved Range MARKER SW OFF A B BOTH Remarks Switches the marker on and off. OFF: The characters are not superimposed. A: The characters are superimposed on the HD SDI A connector. B: The characters are superimposed on the HD SDI B connector. BOTH: The characters are superimposed on the HD SDI A connector and the HD SDI B connector.
AJ-HPX3700G-VQT1V68_eng.book 175 ページ 2008年10月15日 水曜日 午後6時38分 MONI OUT MARKER Items/ Adjustable Data Saved Range CENTER MARK OFF 1 2 3 4 LCD MONITOR Remarks Switch the center mark. OFF: Do not display center mark. 1: + (large) 2: Hollow (large) 3: + (small) 4: Hollow (small) – C U F R SAFETY MARK OFF 1 2 Select the frame type for the safety zone. OFF: Do not display frame. 1: Box Items/ Adjustable Data Saved Range BRIGHTNESS –7 : +0 : +7 Adjust the LCD monitor brightness.
AJ-HPX3700G-VQT1V68_eng.book 176 ページ 2008年10月15日 水曜日 午後6時38分 GENLOCK Items/ Adjustable Data Saved Range GENLOCK Remarks INT EXT Switch the camera synchronizing signal. INT: Synchronize with the internal reference signal regardless of the reference signal input to the GENLOCK IN connector. EXT: Synchronize with the reference signal input to the GENLOCK IN connector. HD SDI COMPOSIT For selecting the output signals that lock phases to the signals that are input in the GENLOCK IN connector.
AJ-HPX3700G-VQT1V68_eng.book 177 ページ 2008年10月15日 水曜日 午後6時38分 PAINT The ____ in the Adjustable Range column indicates the preset mode. RB GAIN CONTROL Items/ Adjustable Data Saved Range R GAIN AWB PRE* RGB BLACK CONTROL Remarks –200 : +000 : +200 For setting the Rch gain when the WHITE BAL switch is in the [PRST] position. MASTER PED* –200 : +000 : +200 For setting the Bch gain when the WHITE BAL switch is in the [PRST] position.
AJ-HPX3700G-VQT1V68_eng.book 178 ページ 2008年10月15日 水曜日 午後6時38分 MATRIX COLOR CORRECTION Items/ Adjustable Data Saved Range MATRIX TABLE Remarks A B For selecting the color correction table for the linear matrix. –63 : +31 : +63 For performing the linear matrix adjustment. (red/green) –63 : –04 : +63 For performing the linear matrix adjustment. (red/blue) –63 : –01 : +63 For performing the linear matrix adjustment. (green/red) –63 : +04 : +63 For performing the linear matrix adjustment.
AJ-HPX3700G-VQT1V68_eng.book 179 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range R (PHASE) Remarks –63 : +00 : +63 For performing the hue correction for red. –63 : +00 : +63 For performing the hue correction between red and magenta. –63 : +00 : +63 For performing the hue correction for magenta. –63 : +00 : +63 For performing the hue correction between magenta and blue. –63 : +00 : +63 For performing the hue correction for blue.
AJ-HPX3700G-VQT1V68_eng.book 180 ページ 2008年10月15日 水曜日 午後6時38分 When shooting with the MASTER GAIN set to “–3dB”, coloring phenomena may occur in portions of the video with high brightness. The coloring phenomena can be reduced by switching the OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE OFF], setting the MANUAL KNEE menu option of the screen to “ON”, and then changing the following menu options.
AJ-HPX3700G-VQT1V68_eng.book 181 ページ 2008年10月15日 水曜日 午後6時38分 HIGH SETTING Items/ Adjustable Data Saved Range MASTER GAIN –3dB : 6dB : 30dB ADDITIONAL DTL Remarks Select the master gain from –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30 dB. DTL GAIN(+) 00 : 06 : 63 For performing the horizontal detail correction level setting. DTL GAIN(–) 00 : 10 : 31 For performing the vertical detail correction level setting. DTL CLIP For performing the noise elimination level setting for detail.
AJ-HPX3700G-VQT1V68_eng.book 182 ページ 2008年10月15日 水曜日 午後6時38分 SKIN TONE DTL Items/ Adjustable Data Saved Range SKIN TONE DTL OFF A B AB Remarks For selecting the skin color table for enabling the skin tone detail. The skin color table is provided in the DETECT TABLE item. By enabling the skin tone detail, it is possible to shoot human skin more accurately.
AJ-HPX3700G-VQT1V68_eng.book 183 ページ 2008年10月15日 水曜日 午後6時38分 KNEE/LEVEL Items/ Adjustable Data Saved Range MASTER PED Remarks –200 : +000 : +200 Set the master pedestal. ON OFF Set the mode when the AUTO KNEE switch is [OFF]. The KNEE MASTER POINT/KNEE MASTER SLOPE set value is enabled when this setting is “ON”. S C U F R MANUAL KNEE Notes The items indicated by are the setting items for PAINT MENU SW() R/W in the screen.
AJ-HPX3700G-VQT1V68_eng.book 184 ページ 2008年10月15日 水曜日 午後6時38分 AUTO KNEE is not performed when AJ-RC10G is connected, but the LED of the AJ-RC10G button is lit by pressing the A.KNEE ON button. GAMMA Items/ Adjustable Data Saved Range MASTER GAMMA Remarks 0.30 : 0.45 : 0.75 Set the master gamma in 0.01 steps. –15 : +00 : +15 Set the Rch gamma. –15 : +00 : +15 Set the Bch gamma.
AJ-HPX3700G-VQT1V68_eng.book 185 ページ 2008年10月15日 水曜日 午後6時38分 VF The ____ in the Adjustable Range column indicates the preset mode. VF DISPLAY Items/ Adjustable Data Saved Range STATUS MODE NORMAL FILM-REC Remarks For selecting the status display mode of the viewfinder. NORMAL: Normal status display FILM-REC: Status display for FILM REC Note Setting STATUS MODE to “FILM-REC” disables the DISP CONDITION and DISP MODE settings.
AJ-HPX3700G-VQT1V68_eng.book 186 ページ 2008年10月15日 水曜日 午後6時38分 VF MARKER VF USER BOX Items/ Adjustable Data Saved Range TABLE A B Remarks Select the VF MARKER setting table. First, select table “A” or “B”, then set the items below for each table. – C U F R CENTER MARK OFF 1 2 3 4 Switch the center mark. OFF: Do not display center mark. 1: + (large) 2: Hollow (large) 3: + (small) 4: Hollow (small) – C U F R SAFETY MARK OFF 1 2 Select the frame type for the safety zone. OFF: Do not display frame.
AJ-HPX3700G-VQT1V68_eng.book 187 ページ 2008年10月15日 水曜日 午後6時38分 VF INDICATOR1 Items/ Adjustable Data Saved Range EXTENDER VF INDICATOR2 Remarks ON OFF For selecting “ON” or “OFF” for the extender display. CAC ON OFF Set the shutter speed indication to “ON” or “OFF”. GAMMA MODE ON OFF Set the filter No. indication to “ON” or “OFF”. DRS ON OFF Set the AWB PRST/A/B indication to “ON” or “OFF”. P-10LOG ON OFF For selecting “ON” or “OFF” for the indication of the currently selected gain.
AJ-HPX3700G-VQT1V68_eng.book 188 ページ 2008年10月15日 水曜日 午後6時38分 VF INDICATOR3 Items/ Adjustable Data Saved Range P2CARD REMAIN Remarks OFF ONE-CARD TOTAL Select the indication mode for the P2 card’s remaining capacity. OFF: Disable the remaining capacity indication. ONE-CARD: Display the remaining capacity of the P2 card currently used for recording. TOTAL: Display the total remaining capacity of all P2 cards in slots. ON OFF Set the battery voltage indication to “ON” or “OFF”.
AJ-HPX3700G-VQT1V68_eng.book 189 ページ 2008年10月15日 水曜日 午後6時38分 MODE CHECK IND Items/ Adjustable Data Saved Range STATUS !LED Remarks ON OFF For the setting to display the status screen when the MODE CHECK button is pressed. GAIN (0dB) ON OFF For the setting to indicate causes for turning on the lamp on the viewfinder is displayed when the MODE CHECK button is pressed. The causes for turning on the lamp are displayed with .
AJ-HPX3700G-VQT1V68_eng.book 190 ページ 2008年10月15日 水曜日 午後6時38分 CAM OPERATION The ____ in the Adjustable Range column indicates the preset mode. CAMERA ID SHUTTER SPEED Items/ Adjustable Data Saved Range Remarks Setting 1 for the CAMERA ID recorded on color bars. Up to 10 characters are allowed for this setting. ID1 – C U F – Setting 2 for the CAMERA ID recorded on color bars. Up to 10 characters are allowed for this setting.
AJ-HPX3700G-VQT1V68_eng.book 191 ページ 2008年10月15日 水曜日 午後6時38分 SHUTTER SELECT Items/ Adjustable Data Saved Range POSITION1 SEL For 59.94 Hz 1/60 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg 45.0deg For 50 Hz Remarks For setting the shutter speed for POSITION1. For setting the shutter speed for POSITION3. 1/50 1/60 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg 45.0deg – C U F – For 59.
AJ-HPX3700G-VQT1V68_eng.book 192 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range POSITION5 SEL For 59.94 Hz 1/60 1/100 1/120 1/250 1/500 1/1000 1/2000 HALF 180.0deg 172.8deg 144.0deg 120.0deg 90.0deg 45.0deg For 50 Hz Remarks For setting the shutter speed for POSITION5. USER SW Items/ Adjustable Data Saved Range USER MAIN SW INH I.OVR S.BLK B.GAMMA Y GET DRS ASSIST C.
AJ-HPX3700G-VQT1V68_eng.book 193 ページ 2008年10月15日 水曜日 午後6時38分 SW MODE Items/ Adjustable Data Saved Range RET SW R.REVIEW CAM RET Remarks SMPTE FULL BARS SPLIT For selecting the color bar to be used. SMPTE: Color bar complied with the SMPTE standards FULL BARS: Full color bar SPLIT: SPLIT color bar for SNG (Satellite News Gathering) R.REVIEW PLAY For specifying what the unit does when the REC check button on the remote control unit is pressed. R.REVIEW: The unit performs rec review.
AJ-HPX3700G-VQT1V68_eng.book 194 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range WHITE BALANCE MODE AWB B TEMP Items/ Adjustable Data Saved Range FILTER INH ON OFF Remarks For selecting independently whether memory data for white balance (Ach, Bch) is retained or not for the respective CC filters. ON: Regardless of the CC filter, data for the memories (2 memories) for Ach and Bch is retained. OFF: The memory data (8 memories) for Ach and Bch is retained for the respective CC filters.
AJ-HPX3700G-VQT1V68_eng.book 195 ページ 2008年10月15日 水曜日 午後6時38分 MAIN OPERATION The ____ in the Adjustable Range column indicates the preset mode. BATTERY/P2CARD Items/ Adjustable Data Saved Range BATTERY SELECT Remarks Select the battery to use. Remaining capacity detection is also performed according to the selected battery. The variable range is changed by the item settings selected on the [BATTERY SETTING1] (page 196) and [BATTERY SETTING2] (page 197) menus.
AJ-HPX3700G-VQT1V68_eng.book 196 ページ 2008年10月15日 水曜日 午後6時38分 BATTERY SETTING1 Items/ Adjustable Data Saved Range PROPAC14 • Remarks Enable selection under BATTERY SELECT. : Enable selection. •: Disable selection. DIONIC90 • Remarks Enable selection under BATTERY SELECT. : Enable selection. •: Disable selection. AUTO MANUAL Select auto or manual to set the NEAR END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. AUTO MANUAL Select auto or manual to set the NEAR END voltage.
AJ-HPX3700G-VQT1V68_eng.book 197 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range ENDURA10 • AUTO MANUAL 11.0 : 13.2 : 15.0 Remarks Enable selection under BATTERY SELECT. : Enable selection. •: Disable selection. Select auto or manual to set the NEAR END voltage. AUTO: Set voltage automatically. MANUAL: Set voltage manually. When “MANUAL” is selected in the menu above, set the NEAR END voltage in 0.1 V steps.
AJ-HPX3700G-VQT1V68_eng.book 198 ページ 2008年10月15日 水曜日 午後6時38分 MIC/AUDIO1 Items/ Adjustable Data Saved Range FRONT VR CH1 OFF FRONT W.L. REAR ALL Remarks Select whether or not to enable the FRONT AUDIO LEVEL control for the signal selected as the input signal to AUDIO IN CH1. OFF: Disabled for any input selected. Recording level does not change by turning the volume control. FRONT: Only enabled when [FRONT] is selected. W.L.: Only enabled when [W.L.] (wireless) is selected.
AJ-HPX3700G-VQT1V68_eng.book 199 ページ 2008年10月15日 水曜日 午後6時38分 MIC/AUDIO2 Items/ Adjustable Data Saved Range FRONT MIC POWER TC/UB Remarks ON OFF Select the phantom power supply for the front microphone. ON OFF Select the phantom power supply for the rear microphone. When “OFF” is selected, no phantom power is supplied even if the LINE/MIC/ +48V selector switch is set to [+48V]. Items/ Adjustable Data Saved Range TC MODE DF NDF Set the time code mode. DF: Drop frame. NDF: Non drop frame.
AJ-HPX3700G-VQT1V68_eng.book 200 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range VITC UB MODE USER/EXT TIME DATE TCG FRM RATE REGEN Remarks Select the user bits mode for VAUX TC (VITC). USER/EXT: If UB MODE is set to “EXT”, the EXT value is recorded. If not, USER value set by UB is recorded. TIME: Select local time (hours, minutes, seconds). DATE: Select local date and time (2 last digits of year, month, date, time). TCG: TCG value enters UB.
AJ-HPX3700G-VQT1V68_eng.book 201 ページ 2008年10月15日 水曜日 午後6時38分 FILE The ____ in the Adjustable Range column indicates the preset mode. SD CARD READ/WRITE Items/ Adjustable Data Saved Range R.SELECT 1 : 8 SD CARD R/W SELECT Remarks Select the file number to read out. Items/ Adjustable Data Saved Range SYSTEM MODE ON R/W OFF – – – F – Read out the data from the SD memory card. READ – – – – – W.SELECT 1 : 8 Write the unit’s menu data to the SD memory card.
AJ-HPX3700G-VQT1V68_eng.book 202 ページ 2008年10月15日 水曜日 午後6時38分 CAC FILE CARD READ Items/ Adjustable Data Saved Range CARD FILE SELECT 01 : 32 Remarks For selecting the number of the chromatic aberration correction file on the SD memory card that will be read or deleted. – – – F – For reading CAC file from the SD memory card. When selected, the following FILE READ screen appears. READ – – – – – For deleting a CAC file from the SD memory card.
AJ-HPX3700G-VQT1V68_eng.book 203 ページ 2008年10月15日 水曜日 午後6時38分 LENS FILE SCENE Items/ Adjustable Data Saved Range FILE NO. 01 : 64 Remarks Select the lens file number. Read out the cinematograph setting. READ CINEMATOGRAPH Read the lens file data. READ USER DATA Write the lens file data. SCENE SEL – – – – – Read out the data from the user area in the memory. – – – – – WRITE – – – – – For resetting the all data of the lens file.
AJ-HPX3700G-VQT1V68_eng.book 204 ページ 2008年10月15日 水曜日 午後6時38分 MAINTENANCE The ____ in the Adjustable Range column indicates the preset mode. LENS ADJ LENS FILE ADJ Items/ Adjustable Data Saved Range F2.8 ADJ Remarks ON OFF The iris is only set to F2.8 when this item set to “ON”. (Adjustment to F2.8 will be executed on the lens) ON OFF The iris is only set to F16 when this item set to “ON”.
AJ-HPX3700G-VQT1V68_eng.book 205 ページ 2008年10月15日 水曜日 午後6時38分 Items/ Adjustable Data Saved Range CAC ADJ CHAR FPGA Items/ Adjustable Data Saved Range CAC CONTROL ON OFF Remarks ON: OFF: Enable chromatic aberration correction Disable chromatic aberration correction Remarks Displays the version of the program for the HD signal I/O control FPGA. – – – – – DC FPGA Displays the version of the program for the SD signal I/O control FPGA.
AJ-HPX3700G-VQT1V68_eng.book 206 ページ 2008年10月15日 水曜日 午後6時38分 OPTION MENU The ____ in the Adjustable Range column indicates the preset mode. OPTION AREA SETTING Items/ Adjustable Data Saved Range ENG SECURITY ON OFF Remarks Select whether or not to prohibit opening the menu screen. ON: Menu screen cannot be opened. Please consult your distributor to release the setting. OFF: Menu screen can be opened.