User Manual
– 85 –
Chapter 4 Shooting — Handling setting data
2
Select [YES] in the confirmation screen and press the control stick (or <SEL/PUSH SET> dial button). (Fig. 1)
Not to format the memory card, select [NO] and press the control stick (or <SEL/PUSH SET> dial button).
3
When the completion message is displayed, select [OK] and press the control stick (or <SEL/PUSH SET> dial button).
For details on error messages, refer to “During thumbnail and menu operation” (page 179).
@@
NOTE
t SD memory cards can also be formatted from the thumbnail screen.
For details, refer to “Formatting SD memory cards” (page 109).
t Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
How to use user data
The content of setting data can be written to and read written data from user area on the internal memory of the camera.
Use of this data allows you to quickly reproduce optimum setup states.
Writing setting data to user area
1
Select [SAVE] in the main menu → [OTHER FUNCTIONS] → [USER FILE] and press the control stick (or <SEL/PUSH SET> dial
button).
The conrmation screen is displayed.
2
Select [YES] and press the control stick (or <SEL/PUSH SET> dial button).
3
When the completion message is displayed, press the control stick (or the <SEL/PUSH SET> dial button).
Loading written user data
1
Select [LOAD] in the main menu → [OTHER FUNCTIONS] → [USER FILE] and press the control stick (or <SEL/PUSH SET> dial
button).
The conrmation screen is displayed.
If [SYSTEM RESTART] is displayed on the conrmation screen, the camera will restart after reading out is complete.
2
Select [YES] and press the control stick (or <SEL/PUSH SET> dial button).
Loading of the le begins.
How to use scene le data
The content of setting data can be written to and read written data from scene le area on the internal memory of the camera. Six types of scene les
can be registered. Use of this data allows you to quickly reproduce optimum setup states.
r Factory settings
[F1:]: File that is suitable for standard shooting.
[F2:FLUO.]: The le suitable for shooting when the characteristics of uorescent light should be considered (such as shooting indoors).
[F3:SPARK]: The le that sharpens the color hue and contrast and that has suitable resolution for SD shooting.
[F4:B-STR]: The le suitable for shooting when the tone level of darker areas are to be stretched (such as shooting at sunset).
[F5:CINE V]: The le suitable for shooting cinematic video that has shaper contrast.
[F6:CINE D]: The le suitable for shooting cinematic video that has wider dynamic range.
@@
NOTE
t [SYSTEM MODE] does not change even if the scene le is changed. Set all items in the main menu → [SYSTEM MODE].