Multi Purpose Camera Operating Instructions
Table Of Contents
- TABLE OF CONTENTS
- Accessories
- Introduction
- Characteristics
- Precautions for use
- Major operating controls and their functions
- How to install
- How to set up the system
- Configuration example 1: Connection of camera controller
- Configuration example 2: High-speed P/T system (1)
- Configuration example 3: High-speed P/T system (2)
- Configuration example 4: Controlling the camera from the AW-RP655 or AW-RP555 controller
- Control exercised from the AW-CB400.
- When the camera is to be controlled from the AW-RP655 controller
- When the camera is to be controlled from the AW-RP555 controller
- Cable wiring specifications when connecting the camera directly to the AW-CB400, AW-RP655 or AW‑RP555
- Operation procedure
- How to adjust
- Intelligent functions
- Setting of menu items
- Appearance
- Specifications
- 16 -
Configuration example 3: High-speed P/T system (2)
Set and check the communication protocol and video format prior to installation.
When mounting the camera on the AW-PH400 pan/tilt head and controlling it from the AW-CB400
remote operation panel, select “4” as the PROTOCOL setting of the AK-HC1800N.
When connecting it directly to and controlling it from the AW-CB400, select “3” as the PROTOCOL setting.
HD SDI
10BASE-T straight
cable (Pan/tilt +
camera control)
Motor drive lens
Monitor
IRIS
AC adapter
AW-PS510AN
ZOOM/FOCUS
Indoor
pan/tilt head
AW-PH400
Pan/tilt control panel
AW-RP400
Remote
operation panel
AW-CB400
Camera connecting cable
AW-CA15H29G
Monitor
AC adapter
AW-PS510AN
HD SDI
HD SDI
Motor drive lens
AK-HC1800N
When mounting the camera
on the pan/tilt head:
Select “4” as the PROTOCOL
setting.
AK-HC1800N
When connecting the camera
directly to the AW-CB400: Select
“3” as the PROTOCOL setting.
How to set up the system