Multi Purpose Camera Operating Instructions
Table Of Contents
- TABLE OF CONTENTS
- Accessories
- Introduction
- Characteristics
- Precautions for use
- Major operating controls and their functions
- How to install
- How to set up the system
- Configuration example 1: Connection of camera controller
- Configuration example 2: High-speed P/T system (1)
- Configuration example 3: High-speed P/T system (2)
- Configuration example 4: Controlling the camera from the AW-RP655 or AW-RP555 controller
- Control exercised from the AW-CB400.
- When the camera is to be controlled from the AW-RP655 controller
- When the camera is to be controlled from the AW-RP555 controller
- Cable wiring specifications when connecting the camera directly to the AW-CB400, AW-RP655 or AW‑RP555
- Operation procedure
- How to adjust
- Intelligent functions
- Setting of menu items
- Appearance
- Specifications
- 69 -
Specifications
Source voltage: 12 V DC
Power consumption: 17 W
indicates safety information.
Image pickup device: 2/3˝ 2.2 million-pixel IT, CCD 3
System: GBR image pickup system
Resolving optical system: F1.4 prism
Optical filter: ND; CLEAR, 1/4, 1/16, 1/64
Lens mount: Bayonet type
Output format: 1080/59.94i
Sensitivity: F10, 2000Ix, 3200K, white reflection rate 89.9 %
S/N: 60 dB typ.
Ambient operating temperature:
+32 °F to +104 °F (0 °C to +40 °C)
Storage temperature: –4 °F to +140 °F (–20 °C to +60 °C)
Weight: Approx. 3.3 lbs. (1.5 kg)
Dimensions (W H D): 3-9/16” 4-5/8” 6-5/16” (90 117 160 mm)
(excluding protrusions)
Input/output signal
Video output: HD SDI (BNC 1 system)
SYNC input: SYNC input (GL input 3 value SYNC/BB)
Camera connector: D-SUB 15-pin connector seat (JAE: D02-M15SAG-20L9E)
Control system: Synchronous (EIA-422)
Lens connector 1: Iris control (HIROSE: HR10A-10R12SC)
Lens connector 2: Zoom, focus control (HIROSE: HR10A-10R12PC)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.