Gesamtübersicht Temperaturregler
Übersicht Allgemeines...............................................................................................4-5 Besonderheiten KT4H / KT4B........................................................................ 6 KT2 24 x 48 x 98,5 mm 9. 9 KT4 48 x 48 x 95 mm 10. 10 KT4H / KT4B 48 x 48 x 56 mm 11 KT7 22,5 x 75 x 100 mm 12 KT8 48 x 96 x 98,5 mm 13 KT9 96 x 96 x 98,5 mm 14 Technische Daten..................................................................................
KT Serie Allgemeines Gemeinsame Merkmale: A A A A A A A A A A A Universaleingang: Thermoelemente, Widerstandsthermometer, Strom, Spannung Regelung: PID, Zwei-Punkt, Anti-Reset-Windup (ARW) Reglerausgang: Relais, Transistor (zum Ansteuern von SSR), Strom Genauigkeit: ± 0,2 % des Messbereiches Einfache Bedienung Heizstromüberwachung optional Alarmausgang mit 9 verschiedenen Betriebsarten RS485 ASCII / Modbus Kommunikation optional Spannungsversorgung: 24 V AC / DC oder 100 bis 240 V AC Standards UL, CSA und
KT Serie Anzeige und Bedienung Anzeige (Hintergrundbeleuchtung: Orange) °F °C Zeigt die gewählte Temperatureinheit an. Leuchtet beim Senden, wenn die serielle Kommunikation (optional) aktiv ist. T/R AT Blinkt während der Selbstoptimierung oder des Auto-Resets (AT= Auto-Tuning). Leuchtet, wenn der Reglerausgang OUT1 oder der Heizstromausgang (optional) aktiviert ist. Beim Gleichstromausgang blinkt diese Anzeige in einem Intervall von 0,25s.
KT4H und KT4B Besonderheiten Spezielle Anzeige LCD-Anzeige + LED-Hintergrundbeleuchtung 11-Segment LCD-Anzeige Große Anzeige des Istwertes PV Darstellung von Istwert PV in drei Farben sowie Farbwechsel möglich 1. Aufgrund der 11-Segment LCD-Anzeige und der LEDHintergrundbeleuchtung kann die Anzeige sogar bei direkter Sonnenbestrahlung klar gelesen werden. 7 Segmente 11 Segmente Darstellung von „N“ 2. Die 11-Segmentanzeige ermöglicht eine klare und verständliche Darstellung der Zeichen. 12 mm 3.
KT4H und KT4B Besonderheiten Kommunikation Verbindung Temperaturregler MEWTOCOL Kommunikationsprotokoll. Es können bis zu 31 Einheiten miteinander verbunden werden. Die Daten werden an eine SPS übertragen.
KT4H und KT4B KT-Monitor Software Die Software „KT-Monitor“ verbindet den PC mit dem Temperraturregler und bietet ein breites Spektrum von Funktionen für Einrichtung, Konfiguration und Überwachung.
KT2 Produkte Temperaturregler KT2 Minimale Größe – Rampenfunktion • 1 / 32 DIN Größe • Abmessungen: 24 x 48 x 98,5 mm (BxHxT) • Fronttafeleinbau • IP66 (frontseitig) • 9-Schritt Programmfunktion (Rampenfunktion) • 2 Sollwerte einstellbar (extern umschaltbar) • Analogwert-Messumformung mit Anzeige • Optional: Zweiter Alarmausgang • Optional: Heizen / Kühlen • Optional: RS485-Schnittstelle (MEWTOCOL) Bestellkodierung AKT2 (1) (2) (3) (4) (5) (6) (7) (1) Spannungsversorgung (2) Sensoreingang (
KT4 Temperaturregler KT4 Der Standardtyp • 1 / 16 DIN Größe • Abmessungen: 48 x 48 x 95 mm (BxHxT) • Fronttafeleinbau • IP66 (frontseitig) • Optional: Zweiter Alarmausgang • Optional: Heizen / Kühlen • Optional: Heizstromalarm (5 A, 10 A, 20 A, 50 A) • Optional: RS485-Schnittstelle (MEWTOCOL) Bestellkodierung AKT4 (1) (2) (3) (4) (5) (6) (7) (1) Spannungsversorgung (2) Sensoreingang (3) Regelausgang (4) Alarmausgang (5) Heizen / Kühlen (6) Heizstromalarm (7) Schnittstelle 1 = 100
KT4H / KT4B Produkte Temperaturregler KT4H Hohe Leistung bei nur 56 mm Bautiefe • 1 / 16 DIN Größe • Abmessungen: 48 x 48 x 56 mm (BxHxT) • Fronttafeleinbau • IP66 (frontseitig) • 3-farbige LCD-Anzeige (11-Segment) • Standardmäßige Parametrierschnittstelle • Optional: Zweiter Alarmausgang • Optional: Heizen / Kühlen • Optional: Heizstromalarm (20 A, 50 A, 1- bzw.
KT7 Produkte Temperaturregler KT7 DIN-Schienentyp – besonders schlank • Abmessungen: 22,5 x 75 x 100 mm (BxHxT) • Schraubklemmenanschlüsse vorne • DIN-Schienenmontage • Analogwert-Messumformung mit Anzeige • Alarmausgang • Optional: Heizstromalarm (5 A, 10 A, 20 A, 50 A) • Optional: RS485-Schnittstelle (MEWTOCOL) Bestellkodierung AKT7 (1) (2) (3) (4) (5) (6) (7) (1) Spannungsversorgung (2) Sensoreingang (3) Regelausgang (4) Alarmausgang (5) Heizen / Kühlen (6) Heizstromalarm (7) Schnitts
KT8 Produkte Temperaturregler KT8 Große Produktvielfalt, gut lesbare Anzeige • 1 / 8 DIN Größe • Abmessungen: 48 x 96 x 98,5 mm (BxHxT) • Fronttafeleinbau • IP66 (frontseitig) • 2 Sollwerte (extern umschaltbar) • Optional: Zweiter Alarmausgang • Optional: Heizen / Kühlen • Optional: Heizstromalarm (5 A, 10 A, 20 A, 50 A) • Optional: RS485-Schnittstelle (MEWTOCOL) Bestellkodierung AKT8 (1) (2) (3) (4) (5) (6) (7) (1) Spannungsversorgung (2) Sensoreingang (3) Regelausgang (4) Alarmausgang (5
KT9 Produkte Temperaturregler KT9 Große gut lesbare Anzeige • 1 / 4 DIN Größe • Abmessungen: 96 x 96 x 98,5 mm (BxHxT) • Fronttafeleinbau • IP66 (frontseitig) • 2 Sollwerte (extern umschaltbar) • Optional: Zweiter Alarmausgang • Optional: Heizen / Kühlen • Optional: Heizstromalarm (5 A, 10 A, 20 A, 50 A) • Optional: RS485-Schnittstelle (MEWTOCOL) Bestellkodierung AKT9 (1) (2) (3) (4) (5) (6) (7) (1) Spannungsversorgung (2) Sensoreingang (3) Regelausgang (4) Alarmausgang (5) Heizen / Kühlen
KT Serie Technische Daten KT2 24 x 48 x 98,5 mm Baugröße (BxHxT) Spezifikationen KT8 KT4H / KT4B 48 x 48 x 56 mm 48 x 96 x 98,5 mm 100 bis 240 V AC 24 V AC/DC 50/60 Hz ca. 8 VA ca. 8 VA Messbereich –200 bis 1370 °C –199,9 bis 400,0 °C –200 bis 1000 °C 0 bis 1760 °C 0 bis 1760 °C 0 bis 1820 °C –200 bis 800 °C KT4 48 x 48 x 95 mm Betriebsspannung (typenabhängig) Frequenz Leistungsaufnahme Eingangstypen ca. 5 VA ca.
KT Serie Technische Daten Spezifikationen KT2 Vibrationsfestigkeit (destruktiv) Stoßfestigkeit (funktional) KT4 KT8 KT9 KT4H / KT4B 10 bis 55 Hz (0,75 mm) in jeder Richtung (120 ms Belastungszeit) für 10 min X-, Y- & Z-Richtung je 5 mal mit 10 G Stoßfestigkeit (destruktiv) Umgebungstemperatur Luftfeuchtigkeit Gewicht X-, Y- & Z-Richtung je 5 mal mit 30 G 0 bis 50 °C ca.
KT Serie Kommunikation Kommunikation über RS485-Modbus (ASCII) oder Modbus RTU Protokoll Beispiel 1 Kommunikation von Temperaturregler und SPS FP-Sigma mit FPG-COM3 (Kommunikationskassette) Standard ASCII oder Modbus ASCII Protokoll PV PV PV OUT2 OUT2 SV SV TX/RX SV2 SV1 AT MODE EVT EVT EVT SV2 A1 A1 A1 SV1 OUT1 OUT1 OUT1 OUT2 SV TX/RX OUT MODE SV2 SV1 AT TX/RX OUT AT MODE OUT OFF OFF OFF KT4 KT4 KT4 RS485 Bis zu 31 Geräte können verbunden werden Beispiel 2 Kommunika
KT Serie Abmessungen Alle Angaben in mm KT2 Serie • Tafelausschnittmaße 47,6 45+0.6 0 22,2+0.3 0 44,8 40 Gummidichtung Montagerahmen 60 36,5 MEMO/STEP PV SV AT T/R OUT EV1 24 EV2 MODE OUT 21,6 OFF KT2 48 10,6 48 98,5 KT4 Serie • Tafelausschnittmaße Gummidichtung Befestigungsschraube • Verbundmontage 75 45+0.5 0 PV 75 OUT1 OUT2 A1 59,7 EVT SV1 SV2 TX/RX AT MODE 45+0.5 0 44,5 SV 45+0.5 0 OUT OFF n x 48 – 3 +0.
KT Serie Abmessungen KT4B Serie Gummidichtung , Montagerahmen Schutzkappe (separat erhältlich) • Verbundmontage • Tafelausschnittmaße Alle Angaben in mm M3 B , , , n: Anzahl der montierten Einheiten , , Achtung: Bei seitlicher Montage ist der IP66 Schutz nicht gewährleistet. Toleranz: ±1 KT8 Serie • Verbundmontage • Tafelausschnittmaße Gummidichtung Befestigungsschraube 75 92+0.5 0 PV SV 96 OUT1 OUT2 HB AT TX/RX A1 A2/LA 130 91 SV1 SV2 n x 48 – 3 +0.
KT Serie Zubehör AKT4811 für KT7 Shuntwiderstand für Stromeingang (mA) AKT4810 für KT2, KT4, KT4H, KT4B, KT8, KT9 Alle Angaben in mm 26±1 74 ±6 Schutzkappe für Rückseite (Abdeckung der Anschlüsse) AKT4801 für KT4 AKT8801 für KT8 AKT9801 für KT9 9 × 8,4 = 75,6 9 × 8,4 = 75,6 19 AKT4H801 für KT4H und KT4B 20 40 44,5 47,5 44,5 88 48 >PC< 92 46,5 17 6 47,7 AKT2801 für KT2 20 22,3 29 47,5 24,5 6 23,8 3,5 15,5 Stromwandler Hinweis: Für den Heizstromalarm werden die Stromwandler CT1 und CT2
KT Serie Zubehör-Halbleiterrelais Produkttypen Serie AQG AQJ AQN 24,5 x 4,5 x 13,5 mm 38 x 28 x 17 mm 58 x 45 x 22 mm Baugröße (B x H x T) Kontakt 1-Form A 1-Form A Laststrom 1A Lastspannung 75 bis 250 V AC 75 bis 250 V AC 5 / 12 / 24 V DC Eingangsspannung Funktion Anschlüsse 2A 10A 15A 1-Form A 25A 10A 15A 20A 5 / 12 / 24 V DC 4 bis 32 V DC Momentwertschalter / Nullpunktschalter Nullpunktschalter Momentwertschalter / Nullpunktschalter Schraubanschlüsse PCB Steckanschlüsse Va
Notizen 22
Weitere Panasonic Produkte Sensoren Die innovative Sensor-Technologie von Panasonic bietet ein umfangreiches Sensorprogramm. Dieses enthält neben Einweg-, Reflexions-Lichtschranken, Lichttastern und Optosensoren mit Lichtwellenleitern, Kontrast-, Farb- und Lasersensoren auch induktive Näherungsschalter sowie Sicherheitslichtvorhänge und miniaturisierte Druckmessgeräte und Durchflussmessgeräte.
Global Network North America Europe Asia Pacific China Japan Panasonic Electric Works Europe AG Handelsvertretung und Technologiezentrum Österreich: Panasonic Electric Works Austria GmbH Panasonic Electric Works Schweiz AG Rudolf-Diesel-Ring 2, 83607 Holzkirchen Tel. +49 (0) 80 24 6 48-0 Fax +49 (0) 80 24 6 48-111 info-de@eu.pewg.panasonic.com www.panasonic-electric-works.de Josef Madersperger Straße 2 A - 2362 Biedermannsdorf Tel. +43 (0) 22 36 2 68 46 Fax +43 (0) 22 36 4 61 33 info-at@eu.pewg.