Manualshelf

User manual

ManualsBrandsPANASONIC ManualsElectronic Control SystemsPID Temperature controller K, J, R, S, B, E, T, N, PL-II, C, Pt100, Pt100 -200 up to +1820 °C 3 A
11121314151617181920
11
3.4 CT (Current transformer) external dimensions (Unit: mm)
AKT4815 (for 5A, 10A and 20A) AKT4816 (for 50A)
(Fig. 3.4-1)
3.5 Mounting
Notice
As the case is made of resin, do not use excessive force while screwing in the
mounting bracket, or the case or screw type mounting bracket could be damaged.
The torque should be 0.12N•m.
Mount the controller vertically to the flat, rigid panel to ensure it adheres to the
Dust-proof/Drip-proof specification (IP66).
Mounting panel thickness: 1 to 8mm.
Insert the instrument from the front side of the panel.
Attach the mounting bracket by the holes at the top and bottom of the case and secure
in place with the screws.
(Fig. 3.5-1)