Operating Instructions Front-End Application Model No. AG-JJLFE20P Exporting from the Front-End Application and Streaming are not available at present. Upgrading is scheduled for the future. In this manual, each explanation for Exporting from the Front-End Application and Streaming is enclosed in a colored frame, like . This manual includes the information for the AG-CPD10CRUP/AG-CPD15P, but this application does not support that at present.
Contents Overview.............................................. 4 Starting up.......................................................... 49 Restarting........................................................... 50 Terminating......................................................... 50 Switching and Adjusting Display Mode................... 51 Switching Full/Simple Operation mode.............. 51 Switching the QVGA and VGA sizes.................. 52 Switching the Main video and Sub video............
Contents (continued) Administrator Setup......................... 79 User Settings.................................................... 108 Limited Operation............................................. 108 Service................................................................. 109 Triggers.................................................................110 Trigger...............................................................110 Trigger1-Trigger16.............................................
Overview AG-JJLFE20P Front-End Application for the Memory Card Video Recorder (hereinafter called "this application") is a Windows application for controlling the AG-CPD20P/AG-CPD15P/AG-CPD10CRUP Memory Card Video Recorder. This application enables the following operations, which are also operable with the remote control panel (sold separately). When the mirror (reversed image) function is provided with CAMERAs 4, 5, and 6, enable this function.
Overview (continued) Playing back recorded video and audio It is possible to play back video and audio recorded in the SDHC Memory Cards that are loaded in the Memory Card Video Recorder. Uploading data for the Memory Card Video Recorder It is possible to upload data recorded in the SDHC Memory Cards that are loaded in the Memory Card Video Recorder to the Back-End server. Meta information and bookmark information are also uploaded. Uploaded data are deleted from the SDHC Memory Cards.
Overview (continued) Operating Environment A PC that meets the following operating environment is required for user of this application. CPU: Intel Core Duo 1.66 GHz or more (recommended) RAM: 512 MB or more (for Windows Vista Business, 1 GB or more) (recommended) Display: 1024×768 dot or more LAN: 1000BASE-T/100BASE-TX OS: Windows XP Professional Service Pack 3 or later, Windows Vista Business Service Pack 2 or later Add on: .Net Framework 3.5 Service Pack 1 Windows Installer3.
Installing/Uninstalling Installing Installing the Front-End application 1. Click on FESetup.msi. The Front-End application is installed with the following procedures. For installing the application, WindowsInstaller V3.1 and .Net Framework 3.5 Service Pack 1 must be installed on the computer. The License Agreement screen appears Preparations 1. Download "WindowsInstaller V3.1" from the Microsoft download site. If the WindowsInstaller has been installed, update it. 2.
Installing/Uninstalling (continued) 3. Click on [Next]. When the file transfer is completed, the screen shown below appears. 4. Click on [Next]. 6. Click on [Close]. The confirmation screen appears. Installation is completed, and the shortcut icon for the Front-End application will be placed on the desktop.
Installing/Uninstalling (continued) Uninstalling Uninstall the Front-End application following the procedures below. Procedures for Windows XP 1. Click on the [Start] button. 2. Select Control Panel 3. Double-click on Add or Remove Programs. The Currently installed programs window opens. 4. Select the program to be uninstalled. 5. Click on the [Remove] button. A confirmation message appears. 6. Click on the [Yes] button. Uninstalling of the selected program starts.
Description of the Screen Displays Main Screen When you login the Front-End application, the Livemode screen will appear. On this screen, you can monitor pictures captured by the cameras connected to the Memory Card Video Recorder and record the pictures. On the Archive-mode screen, you can play back the recorded pictures. Method 1: 1. Click on [Start]. 2. Select [Control Panel]. 3. Select "Windows Firewall." 4. For Windows Vista, select "Change Setting." 5. Check the Firewall setting.
Description of the Screen Displays (continued) Toolbar The buttons on the toolbar of the Main screen can select the operation mode of the Front-End application and switch the display mode of the screen. The lamps indicate the status of the Memory Card Video Recorder. When the AG-CPD20P is connected Live button Upload/Streaming lamp For shifting to Live mode. The Main screen is displayed. (See "Viewing a Live Video," page 56.) The Upload lamp lights while data are being uploaded or exported.
Description of the Screen Displays (continued) QVGA/VGA switch button ( Help button ) Select to display the video at the size of either QVGA or VGA. (See "Switching the QVGA and VGA sizes," page 52.) Main/Sub video switch button ( When this button is clicked, the mouse pointer will be turned to "→+?". Clicking on a button or input field with this pointer will display the description of the clicked button/input field. ) During 1-screen mode, select to display either main video or sub video.
Description of the Screen Displays (continued) When the AG-CPD15P or AG-CPD10CRUP is connected Live button Full/Simple Operation mode switch button For shifting to Live mode. The Main screen is displayed. (See "Viewing a Live Video," page 56.) (only in Live mode) ( ) Switches the display mode between Full Operation mode and Simple Operation mode. (See "Switching Full/Simple Operation mode," page 51.) Archive button For shifting to Archive mode. The Main screen is displayed.
Description of the Screen Displays (continued) Video Display Section In this section, you can monitor pictures captured by the cameras connected to the Memory Card Video Recorder and play back the recorded pictures. Full operation mode Simple operation mode Video display section Time Remaining indication When 1 VGA-size video is displayed, the video is displayed at the center. When 2 videos are displayed, the Main video is displayed on the left and the Sub video is displayed on the right.
Description of the Screen Displays (continued) Live Operation Section IR button/indication Switches IR mode of the camera. Each time this button is clicked, On, Off, and Auto is cyclically selected. The current setting is indicated on the button. In this section, you can control the pictures in the live mode. On: Sets IR mode to ON. Off: Sets IR mode to Off. Auto: Automatically changes IR mode depending on ambient brightness. (See "Making a dark image easier to view," page 57.
Description of the Screen Displays (continued) A/V tab Camera1 tab This is a panel for audio and video control. This is a panel for operating the color camera. The Camera1 tab cannot be selected if no color camera is connected to the Memory Card Video Recorder. ① ② Recording audio switch buttons/indications ③ Switch whether the selected audio channel is to be recorded or not. The current setting is indicated on the button. ④ Zoom buttons For adjusting zooming.
Description of the Screen Displays (continued) LPR tab Zoom buttons/indications Set the zoom. The current setting value is indicated at the center. Clicking on the [-] or [+] button increases/decreases the zoom value. The adjustable range is from 1.0 to 22.0. The magnitude of changes varies depending on the zoom magnification, as shown below: The LPR tab is displayed when Init LPR Mode is set to ENABLE on the Camera1 screen in Administrator Setup. (See "Init LPR Mode," page 85.
Description of the Screen Displays (continued) Playback Section Classify button For creating a new classify information item. If this button is clicked during playback, the playback pauses and a classify information item is created. The Classify tab is displayed in the Property section. This button is disabled during Fast Forward or Fast Rewind mode, or if any classify tag is registered. (See "Classify/case tab," page 23, and "Creating classify information," page 69.
Description of the Screen Displays (continued) Playback Section This panel controls playback of video signals recorded on the SDHC Memory Cards. (See "Playback," page 65.) / (Playback/Pause) button/ indication Each click on this button will toggle playback and pause modes. The current status is indicated on the button. At the end of the file, playback pauses. / (Fast rewind/Slow reverse playback) button If this button is clicked during playback, fast rewind playback will start.
Description of the Screen Displays (continued) Property Section Radar information The following information obtained from the radar gun will be displayed. In Archive mode, the displayed data are updated, according to data sent from the Memory Card Video Recorder. You can check the information for the pictures in the live mode, or for the recorded pictures. Click on a tab, and the corresponding page will be displayed.
Description of the Screen Displays (continued) Officers tab Status tab Officer information is displayed. In Live mode, the setting data of the Memory Card Video Recorder are displayed. In Archive mode, the meta file data embedded in the currently selected video signal are displayed. (See "Officer information," page 71.) The status of the SDHC Memory Cards loaded in the Memory Card Video Recorder is displayed. (See "Status information," page 72.
Description of the Screen Displays (continued) Snapshot tab Cancel button If you click on this button before clicking on the Apply button while editing a note, that editing is canceled, and the note before editing will be displayed. This button is disabled while no note is being edited. The snapshots and their notes are displayed. (See "Snapshot information," page 72.) Note When the AG-CPD15P is used, Snapshot List and Note are displayed in gray and cannot be operated.
Description of the Screen Displays (continued) Classify/Case tab (only in Archive mode) The classify information is displayed. (See "Classify information," page 73.) Note If the AG-CPD15P Memory Card Video Recorder is used, the Event type of the AG-CPD15P is displayed as Classify. Classify List A list of classify information in the selected video file is displayed. If a classify information item is selected, that position is located and the unit enters playback pause mode.
Description of the Screen Displays (continued) Upload Screen When the [Upload] button of the Toolbar is clicked, the Upload screen appears. Video data recorded in the Memory Card Video Recorder can be uploaded to the Back-End server. (See "Uploading Files," page 74.) Start button For starting uploading. Cancel button For canceling uploading. File bar Indicates the progress of current file uploading. Total bar Indicates the progress of all files to be uploaded.
Description of the Screen Displays (continued) Export Screen When the [Export] button of the Toolbar is clicked, the Export screen appears. Video data recorded in the Memory Card Video Recorder can be exported to the hard disk of a PC or removable media. (See "Exporting Files," page 75.) Comment If an error is generated during export, the filename for which the error was generated and the error content are displayed. Start button For starting exporting. Cancel button For canceling exporting.
Description of the Screen Displays (continued) DVD Burn Screen When the [DVD Burn] button of the Toolbar is clicked, the DVD Burn screen appears. Video data recorded in the Memory Card Video Recorder can be output in DVD-Video format for recording onto a DVD. (See "Creating a DVD," page 76.) Start button Comment For starting outputting data for burning a DVD. The current status is displayed.
Description of the Screen Displays (continued) Restore Screen (Provided Only with the AG-CPD15P and AGCPD10CRUP) Start button For starting restoring. Cancel button For canceling restoring. Progress bar Indicates the progress of current file restoring. Status indication Indicates the current status of restoring.
Description of the Screen Displays (continued) Config Screen On default settings When the [Config] button of the Toolbar is clicked, the Config screen appears. An administrator can make settings for the configuration of the Front-End application. (See "Administrator Setup," page 79.) The default settings for various items are shown on the Setup list on pages 113 to 127. Admin Password screen Password For inputting an administrator password.
Description of the Screen Displays (continued) Allocation (Video/Audio) screen Connection Camera (See "Allocation (Video/Audio)," page 80.) Resolution/RecordRate Main The resolution and bit rate of the main video can be set.
Description of the Screen Displays (continued) Preset Settings Audio In Select Select the type of microphones connected to each of [AUDIO IN 1], [2], [3], and [4] connectors on the Memory Card Video Recorder or turn the microphone off. For setting the channel mode and camera connection pattern for Preset 1, Preset 2, and Preset 3. (See "Preset Settings," page 81.) Setting values: Mic, Wireless Mic, Off Init Audio Rec after power ON Form Set the channel mode.
Description of the Screen Displays (continued) Camera1 screen (See "Camera1," page 83.) Auto Zoom End Position Camera1 Set the automatic zooming end magnification. Setting values: 1, 2, 3, 4, 5, 7, 10, 15, 22, LAST Zoom Limit Set the maximum zoom magnification. Setting values: 22, 220 AGC Level Set the level of the camera input gain control. Setting values: LOW, MID, HIGH, OFF Flip Set if flipping of the camera output image will be performed or not.
Description of the Screen Displays (continued) Init Camera1 Settings after power ON The status of the color camera when it is turned on can be set. (See "Init Camera1 Settings after power ON," page 84.) Init Backlight Set the backlight compensation function setting upon power-on of the Memory Card Video Recorder. Setting values: ON, OFF, LAST Init IR Mode Set the IR mode upon power-on of the Memory Card Video Recorder.
Description of the Screen Displays (continued) Date/Time screen (See "Date/Time," page 86.) Time Zone Switch to Night View at Set the time zone. Set the time when Day mode is changed to Night mode.
Description of the Screen Displays (continued) File Transfer screen (See "File Transfer," page 87.) Upload Certification System Name Set the system name of the Memory Card Video Recorder within 50 characters. When the Recorder directly communicates with the Back-End system, the communications is enabled only when the name set here and that registered in the Back-End system are the same. Auto Upload is Enabled Automatic uploading is enabled when a check mark is placed in the box.
Description of the Screen Displays (continued) Network screen Recorder (PC LAN) (See "Network," page 89.) Streaming DHCP Set if the LAN port on the Memory Card Video Recorder that is used for connection of the FrontEnd application is to operate as a DHCP server or not. IP Address list Setting values: OFF, Server1, Server2, Server3, Server4 Set the IP Addresses of the Back-End server for streaming. Up to 5 IP addresses can be registered.
Description of the Screen Displays (continued) Recorder (UPLOAD LAN) Recorder (USB WIRELESS LAN) The settings for the wired LAN port on the Memory Card Video Recorder that is used for connection of the Back-End application can be performed. DHCP Select if the IP address for the wired LAN port on the Memory Card Video Recorder will be obtained from the DHCP server or not.
Description of the Screen Displays (continued) Access Point Setting screen Access Point Select if the access point settings are enabled or not. Setting values: ENABLE, DISABLE SSID Set the SSID for the wireless LAN module connected to the Memory Card Video Recorder. Security Set the encryption method for the wireless LAN module connected to the Memory Card Video Recorder.
Description of the Screen Displays (continued) Operation screen (See "Operation," page 92.) Synchronize Time button For synchronizing the clock of the Memory Card Video Recorder with that of the PC. Version Up button For updating the firmware of the Memory Card Video Recorder. Format button For formatting all SDHC Memory Cards loaded in the Memory Card Video Recorder.
Description of the Screen Displays (continued) Embedded OSD screen Embedded OSD Item (See "Embedded OSD," page 97.) Embedded OSD Time Select if time is displayed as an Embedded OSD. Setting values: ON, OFF Main Select if the Embedded OSD is displayed on the main video or not. Trigger Select if trigger indications are to be displayed as Embedded OSD. Setting values: ON, OFF Setting values: ON, OFF Sub Select if the Embedded OSD is displayed on the sub video or not.
Description of the Screen Displays (continued) Radar/GPS screen Baud Rate[bps] (See "Radar/GPS," page 98.) The baud rate of the serial communication is displayed when a radar gun is connected. Radar Bit Length[bit] The bit length of the serial communication is displayed when a radar gun is connected. Stop Bit[bit] The stop bit length of the serial communication is displayed when a radar gun is connected.
Description of the Screen Displays (continued) GPS Rec Start Information Speed Unit Select the speed unit. Connection of GPS Setting values: MPH, km/h Select if the GPS is connected to the Memory Card Video Recorder or not. Setting values: Recorder, OFF Collection Time[s] Select an interval of collecting data from the GPS.
Description of the Screen Displays (continued) Rec/Play screen Intermittent Rec (See "Rec/Play," page 101.) Select if the intermittent recording mode is enabled or not. Rec Setting values: ON, OFF Loop Rec Select if the loop recording mode is enabled or not. Setting values: ON, OFF Rule of Filename Select the time system to be used in the video filename that is recorded the Memory Card Video Recorder.
Description of the Screen Displays (continued) Auto Power OFF Classify Power Off Time[min] Select the time required from the ACC is turned off up to the Memory Card Video Recorder is turned off. Classify Tag List Setting values: 0, 10, 20, 30, 60, 90, 120, 180 minutes, After Upload The names of the registered classify tags are displayed. Up to 50 classify tags can be registered.
Description of the Screen Displays (continued) Init Settings after power ON Storage Capacity Warning Remaining Recordable Time[min] Init Preset Select A warning sounds when the remaining recordable time becomes shorter than the value set here. Select a preset applied when the Memory Card Video Recorder is turned on.
Description of the Screen Displays (continued) Registration screen (See "Registration," page 105.) Meta Definition User Settings Allow Guest Login Select if login of a user who has not been registered in the Back-End server or the Memory Card Video Recorder is permitted or not. Meta Definition Select the type of meta definition to be registered to the Memory Card Video Recorder.
Description of the Screen Displays (continued) Limited Operation Disable Operation for Set the operation prohibited by a user. Setting values: STOP, OFF Simple Operation Mode Only When set to ON, a user can use only Simple Operation mode. Regardless of this setting, the administrator can use both Simple Operation mode and Full Operation mode. The default setting is OFF. Setting values: ON, OFF Export/DVD Burn Operation Set if export and DVD burn is permitted by a user.
Description of the Screen Displays (continued) Service screen (See "Service," page 109.) Recorder Operating Time[h] Recorder Serial No. The total operation time of the Memory Card Video Recorder is displayed. The serial number of the Memory Card Video Recorder is displayed. FAN Operating Time[h] Note The total operation time of the fan is displayed.
Description of the Screen Displays (continued) Triggers screen (See "Triggers," page 110.) Detection Trigger Set if the GPI trigger function is used or not. Select the condition for a GPI trigger to action. Setting values: ON, OFF Setting values: Low, High, Both, Level High, Level Low Trigger1- Trigger16 OFF, 1, 2, . . . 200 Display Select a trigger code that is to be displayed on a video.
Operations Startup and Termination Option settings If data for the Option items have already been registered on the list, select options from the dropdown lists. If no data have been registered on the list, enter the necessary data. Starting up 1. Set Officer 2 in the same manner as with Officer 1, if necessary. A user named "Arbitrator" and having the password "admin" have been registered as default.
Operations (continued) Restarting Terminating 1. Click on the Close button on the screen. 1. Click on the Close button on the screen. 2. Click on [Logout]. 2. Click on [Exit]. The Shutdown screen is displayed. The Shutdown screen is displayed. This software is terminated. The Login screen is displayed. 3. Perform the necessary settings. (See "Starting up," page 49.) This software restarts, and the Main screen in Live mode will be displayed.
Operations (continued) Switching and Adjusting Display Mode Simple Operation mode Switching Full/Simple Operation mode Full Operation mode, in which all the functions are available, and Simple Operation mode, in which available functions are limited are provided. These two modes can be switched, using the Full/Simple Operation mode switch button.
Operations (continued) Switching the QVGA and VGA sizes In Full Operation mode, either of the QVGA or VGA display size can be selected, using the QVGA or VGA switch button.
Operations (continued) Switching the Main video and Sub video 4 sub-video display in QUAD size With the QVGA size Full Operation mode screen, either 1-screen or 2-screen display can be selected. 1-screen display 4 sub-video display in PANORAMA size With 1-screen display, either the main or sub video is displayed. Each click on the Main/Sub video switch button changes the main and sub videos alternately. 2-screen display With 2-screen display, the main and sub videos are simultaneously displayed.
Operations (continued) Switching Day and Night modes Automatic switching of Day/Night modes On the Date/Time screen in Administrator Setup, place a check mark in the box for Day/Night View Auto Switch. The Day and Night modes are automatically switched at a specified time. (See "Day/Night View," page 86.) The screen image can be switched between Day mode and Night mode. Click on [Day/Night]. Each click on this button changes the screen between Day and Night modes.
Operations (continued) Adjusting image brightness Click on [Brightness adjustment]. The current brightness level will be displayed. You can adjust the brightness of the entire display. Clicking on [▲] button makes the video display brighter, and clicking on [▼] button makes it darker.
Operations (continued) Viewing a Live Video Making a backlit image easier to view Upon startup of this software, the Main screen is displayed in Live mode. The images currently shot by the cameras can be viewed. The display size can be switched, using the button on the toolbar. (See "Switching and Adjusting Display Mode," page 51.) Zooming in live mode Click on [ ]. The darker part of a backlit image becomes easier to view. Each time this button is clicked, "On" and "Off" are switched alternately.
Operations (continued) Making a dark image easier to view Checking audio If a live video is displayed without sound, you can check sound with the following procedures. 1. Click on the A/V tab. 2. Hold [Test] pressed. While this button is held pressed, sound of the corresponding audio channel can be heard. Click on [IR]. Note A dark video image becomes easier to view with infrared imaging. Each time this button is clicked, "Auto," "On," and "Off" are switched.
Operations (continued) Compensating image brightness You can adjust the brightness of dark video parts in the main video. 1. Click on the A/V tab. 2. Click on [ Enhance.
Operations (continued) Recording Setting the classify information The Classify input screen is displayed when you click on the [STOP] button if the following settings are made on the Rec/Play screen in Administrator Setup and the classify tags have been registered in the Front-End application or the Memory Card Video Recorder: • Setting of Force Classify: FORCE or ENABLE (See "Classify," page 104.) • Setting of Loop Rec: OFF (See "Rec," page 101.
Operations (continued) Zooming in record mode Focusing Zooming can be controlled with the [Zoom] button on the Camera1 tab. Focusing can be controlled with the [Focus] button on the Camera1 tab. To zoom out Automatic adjustment Hold the [W] button pressed. Click on [Auto]. Release the button when the zoomed image of your preference is displayed. With the automatic focus function, focusing is performed automatically.
Operations (continued) Adjusting image brightness in record mode Turning off the [REC] lamp of the color camera during recording The brightness can be adjusted with the [Auto Exposure] button on the Camera1 tab. Normally, leave it set to "0." The [REC] lamp on the color camera will be lit during recording. You can make this lamp unlit at any time. Click on the [Camera1 LED] button on the Camera1 tab to set it to "OFF." This makes the REC lamp always unlit.
Operations (continued) Turning audio recording On or Off LPR setting The LPR tab is displayed when Init LPR Mode is set to ENABLE on the Camera1 screen in Administrator Setup. The shutter speed and zoom can be set on the LPR tab. (See "Init Camera1 Settings after power ON," page 84.) Setting the shutter speed Set a shutter speed to capture sharp video of fastmoving subjects. Recording of each audio channel can be turned on or off with the [1], [2], [3], and [4] buttons on the A/V tab.
Operations (continued) Adding bookmarks in record mode Setting the zoom The zoom magnification of the camera can be set in the range of ×1.0 to ×22.0. A bookmark can be added to a file that is being recorded to mark it for playback. 1. Click on [LPR] or [Patrol]. 2. Click on [-] or [+] to set the zoom value. Clicking on [+] increases the magnification, and [-] decreases it. The magnitude of increasing/ decreasing amount varies depending on the zoom magnification. The zoom range x1.0 to x3.
Operations (continued) Creating a snapshot picture in record mode Click on [ ]. A snapshot picture at the current time will be stored in the preset location.
Operations (continued) Playback in Archive Mode Playback The video signals recorded in the Memory Card Video Recorder can be played back in Archive mode. Click on [Archive] on the toolbar. The Main screen in Archive mode is displayed. 1. Select a file you wish to play back from the file list. 2. Click on [ ] button. Playback of the selected file starts. You can also start playback by double-clicking on a file you wish to play back. To pause playback Click on [ ]. Playback pauses.
Operations (continued) Skip playback You can skip to various playback locations. Skip forward/Frame forward playback Click on [ ] or [ ]. If the button is clicked during playback, fast forward, or fast rewind Playback from the beginning of the next file on the file list will start. If the button is clicked during pause An image one frame after the current frame will be displayed. Skip back/Frame rewind playback Click on [ ] or [ ].
Operations (continued) Fast rewind, fast forward, and slow playback Fast rewind playback and slow reverse playback Click on [ ] or [ ]. If the button is clicked during playback Fast rewind playback starts. Each time this button is clicked, fast rewind playback speed changes among x2, x4, and x20. At the beginning of the file, playback pauses. If the button is clicked during pause Slow reverse playback starts. Each time this button is clicked, slow reverse playback speed changes between 1/2 and 1/4.
Operations (continued) Quick replay Turning playback sound On or Off Click on [ 1. Click on the Audio tab to open. ]. Playback from a location 7 seconds before the button is clicked starts. If this button is clicked within 7 seconds from the beginning of a file, playback starts from the beginning of the file. 2. Click on an audio channel button you wish to set. Each time this button is clicked, On and Off are switched alternately. The current setting is displayed on the upper part of the button.
Operations (continued) Creating classify information Adding bookmarks in archive mode Click on [Classify] during playback. A bookmark can be added to a file whose playback, pause, or slow playback is in progress. Playback pauses, and classify information is created. The Classify tab in the Property section is displayed. (See "Classify information," page 73.) Click on [Bookmark] at a location you wish to add a bookmark. During pause, a bookmark is added to the currently paused position.
Operations (continued) Creating a snapshot picture in archive mode Click on [ ]. A snapshot picture at the current time will be stored in the preset location. You can edit the note for snapshots. (See "Snapshot information," page 72.
Operations (continued) Displaying Information Officer information (Officers) If the Officers tab is clicked on the Main screen, officer information that is registered in the Memory Card Video Recorder or written in the meta file will be displayed. Meta Information (Info) If the Info tab is clicked on the Main screen, meta information will be displayed. Officer information The officer IDs and first, middle, and last names for Officer 1 and Officer 2 are displayed in the corresponding fields.
Operations (continued) Status information (Status) Snapshot information If the Status tab is clicked on the Main screen, status information will be displayed. If the Snapshot tab is clicked on the Main screen, snapshot information of the selected video file will be displayed. You can display and edit an assigned snapshot. SDHC Capacity The remaining duration of the SDHC Memory Cards loaded in the Memory Card Video Recorder is displayed.
Operations (continued) Bookmark information Classify information (Classify/Case) If the Bookmark tab is clicked on the Main screen, bookmark information will be displayed. It is possible to move to a desired bookmark position or edit a note. If the Classify tab is clicked on the Main screen, classify information will be displayed. It is possible to move to a desired classify information item position or edit classify information or a note.
Operations (continued) Uploading Files Automatic uploading Place a check mark in the "Auto Upload is Enabled" box on the File Transfer screen in Administrator Setup. When a UDP packet from the Back-End server is received, automatic uploading starts. (See "Upload," page 87.) Video data recorded in the Memory Card Video Recorder can be uploaded to the Back-End server. The meta-information and bookmark information attached to the video are also uploaded.
Operations (continued) Exporting Files If an error is generated The corresponding filename and one of the following error messages will be displayed in the Comment field. •C ommunication with the Recorder failed. •N o file found •N o free space on the PC Take necessary measures. Video data recorded in the Memory Card Video Recorder can be exported to the hard disk of a PC or removable media.
Operations (continued) Creating a DVD 4. Preview the video to be exported on the Preview screen. A video file to be previewed can be selected by clicking on the [|<] or [>|] button. The top of the Main or Sub video is displayed. The tag specified by the Embedded OSD Setting is displayed as an OSD. Video data recorded in the Memory Card Video Recorder can be output in DVD-Video format for recording on a DVD.
Operations (continued) 6. Click on [Burn]. 7. To verify the DVD disc, click on [OK]. The Embedded OSD setting screen is closed, and the confirmation dialog box is displayed. Note Click on [Yes] to start DVD output. The progress is displayed on the File bar and Total bar. A disc may be ejected on some DVD drive. Reinsert the disc manually, and verify the disc. To cancel outputting Click on [Cancel]. While creating an image, output can be canceled.
Operations (continued) Restoring a File Interrupt restoring Click on [Cancel]. If the power for the Memory Card Video Recorder is turned off or a P2 card is removed during recording, the file on the card will be corrupted and cannot be played back. To play the corrupted file, a restoration operation is required. Restore process is interrupted, and the live screen appears. Notes An interrupted restoration process can be resumed at a later time.
Administrator Setup Basic Operations for the Administrator Setup Screen Setting of items 1. Perform the necessary settings and selections on the displayed setting screen. Opening the Administrator Setup screen 1. Click on [Config] on the toolbar of the Main screen. The Administrator Password input screen is displayed. 2. Click on [Apply]. 2. Enter the password in the Password input box. The changed settings will become valid. Canceling changes Click on [Cancel] before clicking on [Apply].
Administrator Setup (continued) Allocation (Video/Audio) Resolution/RecordRate Connection Camera Select the resolution of the screen and the recording rate. Select an appropriate option for the Main screen from the dropdown list for Main and one for the Sub screen from that for Sub.
Administrator Setup (continued) Preset Settings Note An error message will be displayed in the cases below. Settings are overlapped. Preset3 is valid, but nothing has been set for Preset2. No camera is connected. A single camera is connected to [CAMERA 4], [CAMERA 5], or [CAMERA 6] connector on the Memory Card Video Recorder. The channel mode (Form) and display pattern (Pattern) of the 6 cameras connected to the Memory Card Video Recorder can be selected.
Administrator Setup (continued) Init Audio Rec after power ON (Allocation) Audio In Select Set the audio recording status upon startup of the Memory Card Video Recorder. The setting will be applied to all four audio channels. ON: Recording Select the audio connected to each of [AUDIO IN 1], [2], [3], and [4] connectors on the Memory Card Video Recorder. OFF: Not recording LAST: The setting upon the last power-off will be restored.
Administrator Setup (continued) Camera1 Camera1 Auto Zoom Time[s] Set the keeping time of the maximum zoom magnification during automatic zooming. Perform the settings for the color camera that is connected to the [CAMERA 1] connector on the Memory Card Video Recorder. Setting values: 3, 5, 8 (seconds) Auto Zoom End Position Set the automatic zooming end magnification position. Setting values: 1, 2, 3, 4, 5, 7, 10, 15, 22, LAST Zoom Limit Set the maximum zoom magnification.
Administrator Setup (continued) Init Camera1 Settings after power ON Perform the initial settings for the color camera that is connected to the [CAMERA 1] connector on the Memory Card Video Recorder.
Administrator Setup (continued) Init AE Shift Set the brightness of images upon power-on of the color camera. Setting values: 2, 1, 0, -1 , -2, LAST (The setting upon the last power-off will be restored when the camera is turned on. If the Memory Card Video Recorder is not turned off properly, the setting data upon power-off may not be stored properly.) Init LPR Mode Set if the LPR (License Plate Recognition) function is enabled or not.
Administrator Setup (continued) Date/Time Time Zone Day/Night View Select the time zone: When the Day/Night View Auto Switch check box is checked, Day and Night modes are automatically switched. Hawaii Standard Time Yukon Standard Time Mode switching time setting Yukon Daylight Saving Time Set the Day/Night mode switching time when "Day/ Night View Auto Switch" is enabled.
Administrator Setup (continued) File Transfer Upload Export/DVD Burn Auto Upload is Enabled The method to delete videos on the recorder When a check mark is placed in the box, automatic uploading is enabled. Automatic uploading is disabled as default. Select how to delete video files from the Memory Card Video Recorder after data exporting or DVD burning. Force: Automatically deleted Server IP Address for Manual Upload Confirmation: A confirmation screen is displayed.
Administrator Setup (continued) Certification Folder System Name Snapshot To Set a folder in which snapshot files are to be stored. The default setting is "My Pictures" for Windows XP and "Pictures" for Windows Vista. Use the [Refer] button to assign the folder. Set the system name of the Memory Card Video Recorder within 50 characters.
Administrator Setup (continued) Network Streaming Recorder (PC LAN) Perform the settings for the wired network between the Memory Card Video Recorder and the Front-End application. Set the IP addresses for the Back-End server. Up to 5 IP addresses can be registered. The Front-End application periodically sends packets to these IP addresses. The Back-End server recognizes the sender of a packet as a streaming target.
Administrator Setup (continued) Recorder (USB WIRELESS LAN) Adding an access point 1. Click on [Property]. The Access Point Setting screen is displayed. Perform the settings for the USB wireless LAN port that is used for connection between the Memory Card Video Recorder and the Back-End application. When the LAN port setting is obtained from the DHCP server: Set DHCP to Client.
Administrator Setup (continued) Recorder (UPLOAD LAN) Perform the settings for the wired LAN port that is used for connection between the Memory Card Video Recorder and the Back-End application. When the LAN port setting is obtained from the DHCP server: Set DHCP to Client. When the LAN port setting is not obtained from the DHCP server: Set DHCP to OFF, and set the IP Address, Subnet Mask, and Gateway.
Administrator Setup (continued) Operation Synchronize Time Version Up To synchronize the clock of the Memory Card Video Recorder with that of the PC, click on [Synchronize Time]. Upgrade the firmware of the Memory Card Video Recorder, as shown in the following steps. 1. Load the firmware of the Memory Card Video Recorder in the root directory of the USB memory device. 2. Connect a USB memory device. In a case of the AG-CPD20P or AG-CPD10CRUP: Connect a USB memory device to the PC.
Administrator Setup (continued) Format Notes Do not use any button of the PC and the Memory Card Video Recorder or turn them off during version upgrade. If version upgrade fails, an error message is displayed and version upgrade is canceled. (See "Error Messages," page 128.) When the AG-CPD15P is used, version upgrade cannot be performed when the following conditions exist in the root directory: - If a DATA folder is present - If multiple version upgrade files (.
Administrator Setup (continued) Delete All Files Clear Officer Information All video and audio data files that are stored in the SDHC Memory Cards will be deleted. Use this function to delete the data for Officer1, Officer2, VehicleID, Area, Unit, Agency, and Shift registered in the Memory Card Video Recorder. 1. Click on [Delete All Files]. 1. Click on [Clear Personal Information]. 2. Click on [Yes]. 2. Click on [Yes].
Administrator Setup (continued) Factory Default Setting Copy Click on [Factory Default]. The current setting data of the Memory Card Video Recorder and the Front-End application can be copied onto external media, such as a USB memory device. All settings of the Memory Card Video Recorder and Front-End application can be reset to their factory defaults. Note that the recorder and application will not revert to user made settings after being reset to their factory defaults.
Administrator Setup (continued) Setting Retrieval Service Log The setting data for the Memory Card Video Recorder and the Front-End application that have been exported to a USB memory device with the Setting Copy function can be copied back. The operation log of the Memory Card Video Recorder can be exported to external media. 1. Connect the USB memory device to the PC. 2. Specify the file storage location. 1. Click on [Service Log]. A file storage dialog box is displayed.
Administrator Setup (continued) Embedded OSD Embedded OSD Embedded OSD Item Main, Sub Display item setting Set if Time, Trigger, VehicleID@Area data are displayed as Embedded OSD or not. Set if Embedded OSD is displayed on the Main screen (Main) and Sub screen (Sub). ON: Displayed ON: Displayed OFF: Not displayed OFF: Not displayed Display Position Set the Embedded OSD display position on the screen.
Administrator Setup (continued) Radar/GPS Radar Registering radar Load radar gun library data via a USB memory device then register them to the Memory Card Video Recorder. 1. Copy the radar gun library onto a USB memory device. 2. Connect the USB memory device to the PC. 3. Click on [Register Radar]. 4. Select the folder to be copied. The radar gun library data are copied from the USB memory device onto the Memory Card Video Recorder then registered.
Administrator Setup (continued) GPS Specifications for serial communication The specifications for the serial communication are displayed when a radar gun is connected. Baud Rate[bps] Bit Length[bit] Stop Bit[bit] Parity Connection of GPS Select if the GPS is connected to the Memory Card Video Recorder or not. Notes Some radar guns come with a function for setting conditions that enable correct measurement of target vehicle speed.
Administrator Setup (continued) Rec Start Information Speed Unit Select the speed unit (MPH or km/h) to be used in a case where recording is started with the vehicle speed of your vehicle that is obtained from the GPS or the radar gun. The selected unit is displayed on the Info tab.
Administrator Setup (continued) Rec/Play Rec Setting values: 0, 3 (Audio only), 10, 20, 30, 60, 90 (seconds) Rec Continue Time Use this function to set recording continue time for normal recording when a trigger is entered or when the [REC] button is pressed. Setting values: Continue, 1, 2, 5, 10, 15, 20, 30, 60, 90 (minutes) Intermittent Rec Use this function to record one video frame per second. ON: Intermittent recording is enabled. OFF: Intermittent recording is disabled.
Administrator Setup (continued) GPO Select data to be output to GPO 1, 2, and 3. OFF: Not output REC: Recording status data are output. ERROR: Error status data are output. REC+ERROR: Recording and error status data are output. PowerOn Rec Select if recording is started automatically when the Memory Card Video Recorder is turned on. Note ON: Power-on recording is enabled. OFF: Power-on recording is disabled. Selectable setting for GPO3 is OFF or REC.
Administrator Setup (continued) Auto Power OFF Set the status after the Memory Card Video Recorder is turned off. Power Off Time Select the time required from the ACC is turned off up to the Memory Card Video Recorder is turned off. Init Settings after power ON (Rec/Play) Set the status after the Memory Card Video Recorder is turned on. Init Preset Select Select a Preset setting.
Administrator Setup (continued) Classify Classify Tag List Storage Capacity Warning If Warning sound is set to ON, a short beep is to sound twice every 30 seconds when the remaining recordable time becomes shorter than the value set by Remaining Recordable Time[min]. If the Warning sound is set to OFF, no warning sounds. Setting values: 30, 60, 90 (minutes) A list of the registered classify tags can be displayed. Up to 50 classify tags can be registered.
Administrator Setup (continued) Registration Meta Definition Notes If no valid file is found on the USB memory device, the settings on the Memory Card Video Recorder will be cleared. Up to 50 Classify tags can be loaded, but only the first 10 tags will be registered on the Memory Card Video Recorder. This function is not available with the AG-CPD10CRUP. Meta definition is loaded soon after the [OK] button is clicked on, and clicking on the [Apply] button is not required.
Administrator Setup (continued) Definition Lines: An identifier is a definition value. These lines define names and other data. Leading spaces and tabs are ignored. Identifier descriptions are shown in the following table. Officer file Sample files Samples for the setting files are as shown below. Administrator file Identifier Max.
Administrator Setup (continued) Field name file Identifier Max. characters Field1 Field file Description Classify Identifier Max. characters 50 Specify field name of Field1. × Agency Field2 50 Specify field name of Field2. × Field3 50 Specify field name of Field3. Field4 50 Field5 50 Description Classify 50 Specify the value of Field1. ○ Unit 50 Specify the value of Field2. ○ × Shift 50 Specify the value of Field3. ○ Specify field name of Field4.
Administrator Setup (continued) User Settings Limited Operation Allow Guest Login Disable Operation for Select if login of a user who has not been registered in the Front-End application or the Memory Card Video Recorder is permitted or not. ON: Login is permitted. Entering of a password on the Login screen is no longer required. OFF: Login is not permitted. Login using your current login account in the operating system Set the operation prohibited by a user.
Administrator Setup (continued) Service Recorder Operating Time [h] Note Use this function to view the operating time of the Memory Card Video Recorder. When the AG-CPD15P or AG-CPD10CRUP Memory Card Video Recorder is used, BIOS Creation Date is displayed to show the date and time when BIOS was created. Unit: Hour FAN Operating Time [h] Use this function to view the operating time of the fan.
Administrator Setup (continued) Triggers Trigger P3REC: Video specified in Preset3 is recorded. AUDIO2ON: A signal input to [AUDIO IN 2] is recorded. Set if GPI triggers are used or not. ON: The GPI triggers are used. AUDIO2MUTE: A signal input to [AUDIO IN 2] is not recorded. OFF: The GPI triggers are not used. Trigger1-Trigger16 TGT(REC): Recording starts with a TGT input.
Administrator Setup (continued) Detection Set the conditions for an action to be taken when a trigger is detected. Low: Low-edge trigger High: High-edge trigger Both: Both-edge trigger Level Low: Low-level trigger Level High: High-level trigger Specify the speed of your or target vehicle. The unit is MPH or km/h. Set the unit on the Radar/GPS screen in Administrator Setup.
Indicator Lamps and Recorder Status This table shows the relationship between lamp Lit/Unlit/blinking states and the Memory Card Video Recorder's operating status.
Setup Admin Password Enter your password. Item Factory-Preset Admin Password Password Description For inputting an administrator password. admin Retype Password Allocation (Video/Audio) setup Perform video and audio settings. Item Factory-Preset Resolution/RecordRate Description The resolution and bit rate of the video can be set. Main D1 HI The resolution and bit rate of the main video can be set.
Setup (continued) Item Preset1* Factory-Preset Description Preset 1 can be set. 1 Form 1Channel The channel mode can be set. Setting values: 1Channel, 2Channels, 4Channels QUAD, 4Channels PANORAMA, 5Channels QUAD, 5Channels PANORAMA, None Pattern Main 1, Sub- The combination of cameras displayed as Main and Sub videos can be set.
Setup (continued) Item Preset2* Factory-Preset Description Preset 2 can be set. 1 Form 1Channel The channel mode can be set. Setting values: 1Channel, 2Channels, 4Channels QUAD, 4Channels PANORAMA, 5Channels QUAD, 5Channels PANORAMA, None Pattern Main 2, Sub- The combination of cameras displayed as Main and Sub videos can be set.
Setup (continued) Item Preset3* Factory-Preset Description Preset 3 can be set. 1 Form 2Channel The channel mode can be set. Setting values: 1Channel, 2Channels, 4Channels QUAD, 4Channels PANORAMA, 5Channels QUAD, 5Channels PANORAMA, None Pattern Main 1, Sub 2 The combination of cameras displayed as Main and Sub videos can be set.
Setup (continued) Camera1 setup Camera1 settings can be performed.
Setup (continued) Item Factory-Preset Init Camera1 Settings after power ON Description The initial settings upon startup of the color camera connected to the [CAMERA 1] connector on the Memory Card Video Recorder can be set. Init Backlight OFF Initial setting of backlight compensation Setting values: ON, OFF, LAST*1 (The backlight compensation is enabled when set to ON.
Setup (continued) Date/Time setup The date and time can be set.
Setup (continued) File Transfer setup File transfer settings can be performed. Item Factory-Preset Upload Description Upload settings Auto Upload is Enabled Unchecked Select whether automatic uploading is enabled or not. Server IP Address for Manual Upload - IP address of the Back-End Server during manual uploading Confirmation Select how to delete video files from the Memory Card Video Recorder after data exporting or DVD burning.
Setup (continued) Network setup The network settings can be performed. Item Factory-Preset Description Streaming IP Address - IP address setting for the Back-End server for streaming Alert Streaming Checked Resolution QCIF When streaming is in progress in the Back-End application, that is indicated on the Front-End application screen. Streaming is not available at present. Upgrading scheduled for the future.
Setup (continued) Embedded OSD setup The settings for On-Screen Display can be performed.
Setup (continued) Radar/GPS setup Settings related with a radar gun and GPS Item Factory-Preset Radar Description Settings related with a radar gun*1 Connection of Radar OFF Device to which a radar gun is connected*1 Setting values: Recorder, OFF Model Select ProLaser3 Model selection of the radar gun Setting values: ProLaser3 STALKER_DUAL GOLDEN_EAGLE_II GPS GPS-related settings Connection of GPS Recorder Device to which the GPS is connected Setting values: Recorder, OFF Collection Time [s
Setup (continued) Rec/Play setup The settings related with recording and playback can be performed.
Setup (continued) Item Factory-Preset Init Settings after power ON Description Initial settings upon power-on Init Preset Select*1 Preset1 Initial Preset setting Setting values: Preset1, Preset2, Preset3, LAST*2 Init Video Out 1*1 Setting of the throughout video signal to the [VIDEO OUT 1] connector Setting values: CAM1, CAM3, Video OUT2, LAST*2 VIDEO_OUT 2 Force Classify Force Classify Classify information setting DISABLE Addition of classify information Setting values: DISABLE (No addition) EN
Setup (continued) Registration setup Various data can be registered. Item Factory-Preset Description Meta Definition Administrator Select the type of meta definition to be registered to the Memory Card Video Recorder. Setting values: Administrator, Officer, Classify, Field1, Field2, Field3, Field4, Field5 Allow Guest Login OFF Select if login of a user who has not been registered in the Back-End Server or the Memory Card Video Recorder is permitted or not.
Setup (continued) Triggers setup The trigger signals (GPI1-16) can be set. Item Factory-Preset Description Trigger ON Set if the GPI trigger function is used or not. Setting values: ON, OFF Name - Enter a GPI trigger name. Action NONE Action when a trigger signal (GPI1-16) is detected.
Error Messages Messages Common to the Memory Card Video Recorder No. Message Measure E00410 Invalid update file was found. The update file on the USB memory device is corrupted. •C heck whether the update file for the recorder has been correctly copied to the USB memory device. • Reformat the SDHC Memory Card or USB memory device before use. • Use another USB memory device. E00411 Update file was not found. No update file could be found on the USB memory device.
Error Messages (continued) No. Message Measure E00461 Update file was not found. No update file could be found on the USB memory device. •C heck whether the update file for the recorder has been correctly copied to the USB memory device. •R eformat the SDHC Memory Card or USB memory device before use. •U se another USB memory device. E00462 Two or more update files were found. Multiple update files were found on the USB memory device.
Error Messages (continued) No. Message Measure DSP error. This system is rebooting. Wait until the error message is cleared. Contact your supplier if the message does not clear after about a minute. E02440 System error. Couldn't format cards. Insert another SDHC Memory Card. E02441 Couldn’t format cards. E02442 Write Protect cards found. Couldn't format. Disable SDHC Memory Card write-protection. E02444 No SDHC Cards found. Couldn't format. Insert an SDHC Memory Card. E02460 System error.
Error Messages (continued) No. Message Measure E15751 VUP Card found on slot1. Record cannot be started. E15752 VUP Card found on slot2. Record cannot be started. E15753 VUP Card found on slot3. Record cannot be started. E15754 VUP Card found on slot4. Record cannot be started. E15755 Unsupported Card found on slot1. The inserted card cannot be used. Check card type. Record cannot be started. E15756 Unsupported Card found on slot2. Record cannot be started.
Error Messages (continued) No. Message Measure E20911 Microcontroller Update FAILED! An error occurred during the update. The Memory Card Video Recorder reboots automatically to restart an update. Contact your supplier if the problem persists. E20912 Unsupported Microcontroller Detected! The Memory Card Video Recorder has broken down. Contact your supplier. E20921 AG-RCP30 Update FAILED! An error occurred during an update of an AG-RCP30 connected to the Memory Card Video Recorder.
Error Messages (continued) No. Message Measure E27430 Couldn’t start file transfer. Upload cannot be started. Check the network connection. E27431 File transfer was incomplete. Upload cannot be completed because of the network trouble. E27499 System error. File transfer was incomplete. A system error has occurred, and upload cannot be completed. E28200 FinishExport. Export was completed. E28201 USB storage capacity was not enough to export. Use other USB memory device that is not full.
Error Messages (continued) Messages Unique to the Front-End Application Error Messages 30200 and after are the command error of the Memory Card Video Recorder. No. Message Measure 20004 There is no response form the recorder. Connection with the recorder was interrupted. • Check that the LAN cable is connected to the recorder. • Check that the recorder is turned on. 20006 Application cannot communicate with Recorder, please check connections. The application could not communicate with the recorder.
Error Messages (continued) No. Message Measure 20058 Failed in connection with the Back-End Server. The FE could not communicate with the BES. • Check that the FE and BES are connected through LAN. • Check that the network settings of the FE and BES are properly made. • Check if communication is interrupted by a firewall. 20059 The output path was not found. During file output (export, upload, or DVD burn), file transfer from the recorder failed.
Error Messages (continued) No. Message Measure 30900 The recorder cannot execute operation of streaming setting. The recorder cannot perform a streaming operation. 31000 GPS module isn't connected. The GPS is not connected. 31100 The recorder cannot process data Input data from the radar gun cannot be processed. from the radar gun. 31200 Cannot delete video due to the system problem. The video signal cannot be deleted because of a system problem.
Error Messages (continued) No. Message Measure 40002 Execute Cancel. 40003 The parameter was not able to be As an illegal behavior was generated, the status has been recovered. set. 40004 Another processing has already been executed. The command is canceled, because another command is being processed. 40005 The video was not able to be converted. The DirectShow filter does not function properly. • Reinstall DirectShow filter. • Install Media Player. • Reinstall the OS.
Error Messages (continued) No. Message Measure 40017 Failed in writing the file. The drive that is used for temporary storage is not ready for writing. • If the temporary folder does not exist, create it. • If the free capacity of the temporary drive is insufficient, delete unnecessary files. • Delete unnecessary files from the temporary folder. 40018 Verifying was canceled. This message is displayed when Verify is canceled. • Execute Verify. 40019 The DVD disc will be verified.
Error Messages (continued) No. Message Measure 100005 The password is wrong. The input password is invalid. • Input a correct password. 100006 The recorder is disconnected. Connection with the recorder was interrupted. • Check that the LAN cable is connected to the recorder. • Check that the recorder is turned on. 100007 Cannot set same preset. Set different preset. A different preset setting has been made with the same preset No. • Use a different preset No. 100008 Invalid Camera connection.
Error Messages (continued) No. Message Measure 100024 The e-mail software could not be opened.\nPlease install a MAPI compliant e-mail application. Startup of the e-mail software failed. • Check that the e-mail settings in Internet Option are in compliance with the MAPI standards. 100025 The character string length of the network key is 5 or 13. Or, if the length of the character string is 10 or 26, please input character (0-9,a-f,A-F) that shows the hexadecimal number.
Camera Connection and Combination of Cameras Combination of cameras depends on the cameras connected to the recorder. Available combination is as shown below. Selectable combination of cameras depends on the detected cameras. Selectable preset patterns depends on the detected cameras. If CAM1 is set to OFF, any combination of cameras indicated by “1” cannot be selected. If CAM2 is set to OFF, any combination of cameras indicated by “2” cannot be selected.
Service Logs The operation history of the recorder can be obtained as service logs. Contents The items shown below can be obtained as service logs. Normal operation Items Level Character strings Timing Starting (start, restart) N Power On just after start Ending (all power off, restart) N Power Off just before end Starting (start, restart) N System Start AG-CPD20 4.xx.xxx.0 Serial No.
Service Logs (continued) Items Level Character strings Timing Initializing personal data I Clear Personal when occurred Resetting to the factory default settings I Clear All when occurred Resetting to the factory default settings without menu display N ClearMenuless All when occurred Detecting the remote control panel connection I CP Attach 3.xx.xxx.
Service Logs (continued) Error (displayed) Items Level Character strings Timing Record error E [Rec Error] error number factor number when occurred SD card format error E [Format Error] error number when occurred All deletion error E [DeleteAll Error] error number when occurred Play error E [Play Error] error number when occurred Export error E [Export Error] error number when occurred Upload error E [Upload Error] error number when occurred Upgrading error E [Vup Error] erro
Service Logs (continued) Format of Service Log The format of the service log is as shown below. UTC 2008-11-22 00:48:09NPower On 2008-11-22 09:48:12NSystem Start AG-CPD20 4.xx.xxx.
Software License Agreement This product is licensed under the AVC Patent Portfolio License for the personal and noncommercial use of a consumer, and no license is granted or shall be implied for any use other than the personal uses detailed below.
Panasonic Computer Solutions Company 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 © 2009 P