Operating Instructions

11
Setup
(continued)
11
Item Factory-Preset Description
Preset3*
1
Preset 3 can be set.
Form 2Channel The channel mode can be set.
Setting values: 1Channel, 2Channels, 4Channels QUAD, 4Channels
PANORAMA, 5Channels QUAD, 5Channels PANORAMA, None
Pattern Main 1, Sub 2 The combination of cameras displayed as Main and Sub videos can be set.
Setting values for Form and Pattern:
Form Pattern
1Channel Main 1, Sub -
Main 2, Sub -
Main 3, Sub -
2Channels Main 1, Sub 2
Main 1, Sub 3
Main 2, Sub 3
4Channels QUAD Main -, Sub 1456
Main -, Sub 2456
Main -, Sub 3456
4Channels PANORAMA Main -, Sub 1456
Main -, Sub 2456
Main -, Sub 3456
5Channels QUAD Main 1, Sub 2456
Main 1, Sub 3456
Main 2, Sub 3456
Main 3, Sub 2456*
2
5Channels PANORAMA Main 1, Sub 2456
Main 1, Sub 3456
Main 2, Sub 3456
Main 3, Sub 2456*
2
None*
3
Audio In Select The audio inputs can be selected.
Audio1 Wireless Mic The audio signal connected to the [AUDIO IN 1] connector can be selected.
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Audio2 Mic The audio signal connected to the [AUDIO IN 2] connector can be selected.
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Audio3 OFF The audio signal connected to the [AUDIO IN 3] connector can be selected.
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Audio4 OFF The audio signal connected to the [AUDIO IN 4] connector can be selected.
Setting value: Mic (microphone)
Wireless Mic (wireless microphone)
Off (no connection)
Init Audio Rec after
power ON
ON Initial audio output setting (upon power-on)
Setting values: ON, OFF, LAST*
4
*1 Selectable Form and Patter of Preset1, Preset2,
and Preset3 depend on the settings of Connection
Camera.
*2 This setting is enabled when the camera connected
to the [CAMERA 1] connector is set to OFF.
*3 "None" is not selectable for Preset1 unless all
camera connections are set to OFF.
*4 The setting upon the last power-off will be restored
when the camera is turned on. If the Memory Card
Video Recorder is not turned off properly, the setting
data upon power-off may not be stored properly.