Operating Instructions

1
1
Description of the Screen Displays
(continued)
LPR tab
The LPR tab is displayed when Init LPR Mode is set
to ENABLE on the Camera1 screen in Administrator
Setup.
(See "Init LPR Mode," page 85.)
①
②
③
④
(See "LPR setting," page 62.)
Patrol button
For setting the Memory Card Video Recorder to
Patrol mode. The values for Shutter Speed and
Zoom are set for Patrol mode.
LPR button
For setting the Memory Card Video Recorder to
LPR mode. The values for Shutter Speed and
Zoom are set for LPR mode.
Shutter Speed buttons/indication
Set the shutter speed. The current setting value is
indicated at the center.
[ ]
or [
]
button increases/decreases the
shutter speed. Each click on one of these buttons
changes the setting value, as shown below:
In Patrol mode:
Auto, 1/100, 1/500, 1/1000
In LPR mode:
Auto, 1/500, 1/1000
(See "Setting the shutter speed," page 62.)
Zoom buttons/indications
Set the zoom. The current setting value is indicated
at the center.
Clicking on the [-] or [+] button increases/decreases
the zoom value. The adjustable range is from 1.0 to
22.0. The magnitude of changes varies depending
on the zoom magnication, as shown below:
The zoom range x1.0 to x3.0:
increase and
decrease by x0.1
The zoom range x3.0 to x5.0:
increase and
decrease by x0.2
The zoom range x5.0 to x10.0:
increase and
decrease by x0.5
The zoom range x10.0 to x22.0:
increase and
decrease by x1.0
(See "Setting the zoom" page 63.)